Cryo-electron microscopy and single molecule fluorescent microscopy detect CD4 receptor induced HIV size expansion prior to cell entry

Viruses are often thought to have static structure, and they only remodel after the viruses have entered target cells. Here, we detected a size expansion of virus particles prior to viral entry using cryo-electron microscopy (cryo-EM) and single molecule fluorescence imaging. HIV expanded both under cell-free conditions with soluble receptor CD4 (sCD4) targeting the CD4 binding site on the HIV-1 envelope protein (Env) and when HIV binds to receptor on cellular membrane. We have shown that the HIV Env is needed to facilitate receptor induced virus size expansions, showing that the 'lynchpin' for size expansion is highly specific. We demonstrate that the size expansion required maturation of HIV and an internal capsid core with wild type stability, suggesting that different HIV compartments are linked and are involved in remodelling. Our work reveals a previously unknown event in HIV entry, and we propose that this pre-entry priming process enables HIV particles to facilitate the subsequent steps in infection.

Dual responsive chemosensors for anions : the combination of fluorescent PET (Photoinduced Electron Transfer) and colorimetric chemosensors in a single molecule

The design and synthesis of two novel fluorescent PET anion sensors is described, based on the principle of ‘fluorophore-spacer-(anion)receptor’. The sensors 1 and 2 employ simple diaromatic thioureas as anion receptors, and the fluorophore is a naphthalimide moiety that absorbs in the visible part of the spectrum and emits in the green. Upon recognition of anions such as F⁻ and AcO⁻ in DMSO, the fluorescence emission of 1 and 2 was ‘switched off’, with no significant changes in the UV–vis spectra. This recognition shows a 1:1 binding between the receptor and the anions. In the case of F⁻, further additions of the anion, gave rise to large changes in the UV–vis spectra, where the λ_max at 455 nm was shifted to 550 nm. These changes are thought to be due to the deprotonation of the 4-amino moiety of the naphthalimide fluorophore. This was in fact found to be the case, using simple naphthalimide derivatives such as 6. Sensors 1 and 2 can thus display dual sensing action; where at low concentrations, the fluorescence emission is quenched, and at higher concentrations the absorption spectra are modulated.

Single molecule conductance through rigid norbornylogous bridges with zero average curvature

A new homologous series of norbornylogous (NB) bridges has been synthesized in which the average curvature of the bridges is very small. The molecules are rigid and have two thiol moieties at each end to allow them to form self-assembled monolayers (SAMs) and to connect to two gold electrodes to form a molecular junction. The SAMs formed were characterized using electrochemistry to determine the surface coverage of molecules on gold surface and to provide an indication of the packing of the NB bridges while ellipsometry and X-ray photoelectron spectroscopy (XPS) were used to provide an indication of the SAM thickness and orientation. Single molecule conductance of NB bridges was measured as a function of the molecular length. The conductance was found to decrease exponentially with the length with a decay constant that is exactly correlated with photoelectron transfer and other studies at the multiple molecule level. The molecule−electrode contact resistance was determined and compared with that of related alkanedithiol molecular junctions.

RiboSys, a high-resolution, quantitative approach to measure the in vivo kinetics of pre-mRNA splicing and 3'-end processing in Saccharomyces cerevisiae

We describe methods for obtaining a quantitative description of RNA processing at high resolution in budding yeast. As a model gene expression system, we constructed tetON (for induction studies) and tetOFF (for repression, derepression, and RNA degradation studies) yeast strains with a series of reporter genes integrated in the genome under the control of a tetO7 promoter. Reverse transcription and quantitative real-time-PCR (RT-qPCR) methods were adapted to allow the determination of mRNA abundance as the average number of copies per cell in a population. Fluorescence in situ hybridization (FISH) measurements of transcript numbers in individual cells validated the RT-qPCR approach for the average copy-number determination despite the broad distribution of transcript levels within a population of cells. In addition, RT-qPCR was used to distinguish the products of the different steps in splicing of the reporter transcripts, and methods were developed to map and quantify 3′-end cleavage and polyadenylation. This system permits pre-mRNA production, splicing, 3′-end maturation and degradation to be quantitatively monitored with unprecedented kinetic detail, suitable for mathematical modeling. Using this approach, we demonstrate that reporter transcripts are spliced prior to their 3′-end cleavage and polyadenylation, that is, cotranscriptionally.

Mutational interference mapping experiment (MIME) for studying RNA structure and function

RNA regulates many biological processes; however, identifying functional RNA sequences and structures is complex and time-consuming. We introduce a method, mutational interference mapping experiment (MIME), to identify, at single-nucleotide resolution, the primary sequence and secondary structures of an RNA molecule that are crucial for its function. MIME is based on random mutagenesis of the RNA target followed by functional selection and next-generation sequencing. Our analytical approach allows the recovery of quantitative binding parameters and permits the identification of base-pairing partners directly from the sequencing data. We used this method to map the binding site of the human immunodeficiency virus-1 (HIV-1) Pr55(Gag) protein on the viral genomic RNA in vitro, and showed that, by analyzing permitted base-pairing patterns, we could model RNA structure motifs that are crucial for protein binding.

Dynamic performance of duolayers at the air/water interface. 1. Experimental analysis

Understanding, and improving, the behavior of thin surface films under exposure to externally applied forces is important for applications such as mimicking biological membranes, water evaporation mitigation, and recovery of oil spills. This paper demonstrates that the incorporation of a water-soluble polymer into the surface film composition, i.e., formation of a three-duolayer system, shows improved performance under an applied dynamic stress, with an evaporation saving of 84% observed after 16 h, compared to 74% for the insoluble three-monolayer alone. Canal viscometry and spreading rate experiments, performed using the same conditions, demonstrated an increased surface viscosity and faster spreading rate for the three-duolayer system, likely contributing to the observed improvement in dynamic performance. Brewster angle microscopy and dye-tagged polymers were used to visualize the system and demonstrated that the duolayer and monolayer system both form a homogeneous film of uniform, single-molecule thickness, with the excess material compacting into small floating reservoirs on the surface. It was also observed that both components have to be applied to the water surface together in order to achieve improved performance under dynamic conditions. These findings have important implications for the use of surface films in various applications where resistance to external disturbance is required.

Localized relaxational dynamics of succinonitrile

Succinonitrile (N≡C—CH₂—CH₂—C≡N) is a good ionic conductor, when doped with an ionic compound, at room temperature, where it is in its plastic crystalline phase (Long et al. Solid State Ionics 2003, 161, 105; Alarco et al. Nat. Mater. 2004, 3, 476). We report on the relaxational dynamics of the plastic phase near the two first-order phase transitions and on the effect of dissolving a salt in the plastic matrix by quasi-elastic neutron scattering. At 240 K, the three observed relaxations are localized and we can describe their dynamics (τ ≈ 1.7, 17, and 140 ps) to a certain extent from a model using a single molecule that was proposed by B_ée et al. allowing for all conformations in its unit cell (space group IM3M). The extent of the localized motion as observed is however larger than that predicted by the model and suggests that the isomerization of succinonitrile is correlated with a jump to the nearest neighbor site in the unit cell. The salt containing system is known to be a good ionic conductor, and our results show that the effect of the ions on the succinonitrile matrix is homogeneous. Because the isomerizations and rotations are governed by intermolecular interactions, the dissolved ions have an effect over an extended range. Due to the addition of the salt, the dynamics of one of the components (τ ≈ 17 ps) shows more diffusive character at 300 K. The calculated upper limit of the corresponding diffusion constant of succinonitrile in the electrolyte is a factor 30 higher than what is reported for the ions. Our results suggest that the succinonitrile diffusion is caused by nearest neighbor jumps that are localized on the observed length and time scales.

Release of allergens in respirable aerosols : a link between grass pollen and asthma

Background: Asthma incidence has long been linked to pollen, even though pollen grains are too large to penetrate into the airways where asthmatic responses originate. Pollen allergens found in small, respirable particles have been implicated in a number of asthma epidemics, particularly ones following rainfall or thunderstorms.

Objective: The aim of this study was to determine how pollen allergens form the respirable aerosols necessary for triggering asthma.

Methods: Flowering grasses were humidified and then dried in a controlled-environment chamber connected to a cascade impactor and an aerosol particle counter. Particles shed from the flowers were analyzed with high-resolution microscopy and immunolabeled with rabbit anti-Phl p 1 antibody, which is specific for group 1 pollen allergens.

Results: Contrary to what has been reported in other published accounts, most of the pollen in this investigation remained on the open anthers of wind pollinated plants unless disturbed—eg, by wind. Increasing humidity caused anthers to close. After a cycle of wetting and drying followed by wind disturbance, grasses flowering within a chamber produced an aerosol of particles that were collected in a cascade impactor. These particles consisted of fragmented pollen cytoplasm in the size range 0.12 to 4.67 μm; they were loaded with group 1 allergens.

Conclusion: Here we provide the first direct observations of the release of grass pollen allergens as respirable aerosols. They can emanate directly from the flower after a moisture-drying cycle. This could explain asthmatic responses associated with grass pollination, particularly after moist weather conditions.

Birch pollen rupture and the release of aerosols of respirable allergens

Backgound Birch pollen allergens have been implicated as asthma triggers; however, pollen grains are too large to reach the lower airways where asthmatic reactions occur. Respirable-sized particles containing birch pollen allergens have been detected in air filters, especially after rainfall but the source of these particles has remained speculative.

Objective To determine the processes by which birch pollen allergens become airborne particles of respirable size with the potential to contribute to airways inflammation.

Methods Branches with attached male catkins were harvested and placed in a controlled emission chamber. Filtered dry air was passed through the chamber until the anthers opened, then they were humidified for 5 h and air-dried again. Flowers were disturbed by wind generated from a small electric fan. Released particles were counted, measured and collected for immuno-labelling and high-resolution microscopy.

Results Birch pollen remains on the dehisced anther and can rupture in high humidity and moisture. Fresh pollen takes as long as 3 h to rupture in water. Drying winds released an aerosol of particles from catkins. These were fragments of pollen cytoplasm that ranged in size from 30 nm to 4 μm and contained Bet v 1 allergens.

Conclusion When highly allergenic birch trees are flowering and exposed to moisture followed by drying winds they can produce particulate aerosols containing pollen allergens. These particles are small enough to deposit in the peripheral airways and have the potential to induce an inflammatory response.

X-ray crystallography : applications in the biotechnology research

X-ray crystallography is essentially a form of very high resolution microscopy. It enables us to visualize protein structures at the atomic level and enhances our understanding of protein function. Specifically we can study how proteins interact with other molecules, how they undergo conformational changes, and how they perform catalysis in the case of enzymes. Armed with this information we can design novel drugs that target a particular protein, or rationally engineer an enzyme for a specific industrial process.

Benzene adsorption at the aqueous (011) α-quartz interface : is surface flexibility important?

Atomistic simulations of molecular adsorption onto inorganic substrates under aqueous conditions can be used to guide the rational design of new materials, fabricated using biomimetic methods. The success of such work depends critically on the model used. Here, we investigate the impact of using a rigid structural model of the (0 1 1) ?-quartz surface, over a fully flexible model, on the calculated free energy change in the adsorption of a single molecule of benzene (a simple analogue of the amino acid phenylalanine) from liquid water. Subtle differences in the mobility of the adsorbate close to the surface result in the free energy of adsorption being overestimated by the rigid model, relative to the fully flexible case. Moreover, we find that the distribution of bound configurations of the adsorbate at their respective free energy minima is different between the two models.

Protein electrochemistry using graphene-based nano-assembly: an ultrasensitive electrochemical detection of protein molecules via nanoparticle-electrode collisions

We describe a new electrochemical detection approach towards single protein molecules (microperoxidase-11, MP-11), which are attached to the surface of graphene nanosheets. The non-covalently functionalized graphene nanosheets exhibit enhanced electroactive surface area, where amplified redox current is produced when graphene nanosheets collide with the electrode.

Real-time electrochemical monitoring of covalent bond formation in solution via nanoparticle-electrode collisions

We describe an alternative electrochemical technique to monitor covalent bond formation in real-time using nanoparticle-electrode collisions. The method is based on recognising the redox current when MP-11 functionalised chemical reduced graphene oxide (rGO) nanosheets collide with Lomant's reagent modified gold microelectrode. This facile and highly sensitive monitoring method can be useful for investigating the fundamental of single-molecule reactions.

Image vusion : image and video fusion

It is not uncommon in many image acquisition solutions to balance a trade off between obtaining high resolution images at very low frame rates or acquiring a burst of low resolution images at higher frame rates. This paper introduces a novel image fusion framework for producing a high resolution video by augmenting analysed motion in a low resolution video to a single high resolution image. Many application domains such as remote sensing, low radiation medical imaging and battlefield automation will benefit from this novel fusion framework. The results show that a captured high resolution 30 frames per second video can be produced with 95% cost reduction while maintaining 94% structural similarity.