Fault tolerance operation of cooperative manipulators

Autonomous or teleoperation of critical tasks in space applications require fault tolerant robotic manipulators. These manipulators are able to maintain their tasks even if a joint fails. If it is presumed that the manipulator is fault tolerant on its trajectory, then the next step is to provide a fault tolerant force at the end-effector of the manipulator. The problem of cooperative fault tolerant force is addressed in this paper within the operation of two manipulators. The cooperative manipulators are used to compensate the force jump which occurs on the force of the end-effector of one manipulator due to a joint failure. To achieve fault tolerant operation, the contribution of the faulty joint for the force of the end-effector of the faulty manipulator is required to be optimally mapped into the torque of the faulty and healthy manipulators. The optimal joint torque reconfigurations of both manipulators for compensating this force jump are illustrated. The proposed frameworks are deployed for two cooperative PUMA560 manipulators. The results of the case studies validate the fault tolerant cooperation strategies.

Formations of robotic swarm: an artificial force based approach

Cooperative control of multiple mobile robots is an attractive and challenging problem which has drawn considerable attention in the recent past. This paper introduces a scalable decentralized control algorithm to navigate a group of mobile robots (swarm) into a predefined shape in 2D space. The proposed architecture uses artificial forces to control mobile agents into the shape and spread them inside the shape while avoiding intermember collisions. The theoretical analysis of the swarm behavior describes the motion of the complete swarm and individual members in relevant situations. We use computer simulated case studies to verify the theoretical assertions and to demonstrate the robustness of the swarm under external disturbances such as death of agents, change of shape etc. Also the performance of the proposed distributed swarm control architecture was investigated in the presence of realistic implementation issues such as localization errors, communication range limitations, boundedness of forces etc.

An experimental study on the failure tolerant control of a redundant planar serial manipulator via pseudo-inverse approach

In this paper, fault-tolerant control of redundant planar serial manipulators has been investigated experimentally via an offline method called psuedo-inverse reconfiguration method. Minimizing the end-effector's velocity jump via an optimal mapping of joint failures into healthy joints velocity space can be regarded as the main contribution of this reconfiguration approach. This algorithm has been simulated and implemented on a four-link serial manipulator named as TaArm. It should be mentioned that for simulation and practical tests, C++ programming language in QtCreator environment has been used which provided high computational speed. Two scenarios has been selected for simulation and implementation studies and results shows that the algorithm considerably removes the velocity jump of the end-effector in both simulation and experimetal studies.

An introduction to utilising the redundancy of a kinematically redundant parallel manipulator to operate a gripper

Although parallel manipulators provide several benefits compared to similar-sized serial manipulators, they typically exhibit a limited rotational workspace. One approach to designing a parallel manipulator with infinite range of tool rotation around one axis is to introduce kinematic redundancy. This is typically achieved by extending a non-redundant mechanism with an additional actuator and a supplemental degree of freedom, while the degrees of freedom of the tool platform remain the same. The main drawback of this approach is the cost of the additional actuator. In this paper, we discuss the possibility of harvesting the motion in the additional degree of freedom to operate a gripper. The benefits of the proposed idea include saving the cost of a gripper actuator and reducing the mass of the manipulated platform. Additionally, the requirement to provide the manipulated platform with compressed air or electric power is removed. Several variants of a kinematically redundant manipulated platform with five degrees of freedom are introduced along with conceptual mechanical designs for transforming the redundant platform motion into the opening and closing of a gripper.

Fault tolerance force for redundant manipulators

Fault tolerant manipulators maintain their trajectory even if their joint/s fails. Assuming that the manipulator is fault tolerant on its trajectory, fault tolerant compliance manipulators provide required force at their end-effector even when a joint fails. To achieve this, the contributions of the faulty joints for the force of the end-effector are required to be mapped into the proper compensating joint torques of the healthy joints to maintain the force. This paper addresses the optimal mapping to minimize the force jump due to a fault, which is the maximum effort to maintain the force when a fault occurs. The paper studies the locked joint fault/s of the redundant manipulators and it relates the force jump at the end-effector to the faults within the joints. Adding on a previous study to maintain the trajectory, in here the objective is to providing fault tolerant force at the end-effector of the redundant manipulators. This optimal mapping with minimum force jump is presented using matrix perturbation model. And the force jump is calculated through this model for single and multiple joints fault. The proposed optimal mapping is used in different fault scenarios for a 5-DOF manipulator; also it is deployed to compensate the force at the end-effector for the 5-DOF manipulator through simulation study and the results are presented.

An assault on identity : the male view of being made redundant

Participation and success in paid work is a key element of identity for many men. The increased prevalence of downsizing, and the discarding of individuals from organisations, therefore has particular pertinence when considering men’s workplace experiences. This paper discusses findings from an exploratory study investigating the experiences of Australian executives who had been made redundant. Three themes related to male identity are presented: the impact on respondents’ positions as breadwinners for their families; a concern for being seen to be capable and in control; and perceptions of loss of status upon returning to work. These executives expressed feelings of anger, sadness, fear and embarrassment as a result of the assault to their identity. There is a need for continued focus on these experiences and their implications for both men and women, particularly as individuals report undergoing multiple redundancies.

Automated robotic grinding by low-powered manipulator

A new robotic grinding process has been developed for a low-powered robot system using a spring balancer as a suspension system. To manipulate a robot-arm in the vertical plane, a large actuator torque is required due to the tool weight and enormous gravity effect. But the actuators of the robot system always exhibit a limited torque capacity. This paper presents a cheap and available system for precise grinding tasks by a low-powered robot system using a suspension system. For grinding operations, to achieve position and force-tracking simultaneously, this paper presents an algorithm of the hybrid position/force-tracking scheme with respect to the dynamic behavior of a spring balancer. Material Removal Rate (MRR) is developed for materials SS400 and SUS304. Simulations and experiments have been carried out to demonstrate the feasibility of the proposed system.

A parallel downloading algorithm for redundant networks

In this paper, we study the downloading mechanism of BitTorrent (or BT), a P2P based popular and convenient parallel downloading software tool, point out some of its limitations, and propose an algorithm to improve its performance. In particular, we address the limitations of BT by using neighbours in P2P networks to resolve the redundant copies problem and to optimise the downloading speed. Our preliminary experiments show that the proposed enhancement algorithm works well.

Being made redundant: from 'the writing on the wall' to 'a bolt from the blue' - 'being disposed of' as a human tragedy

This paper focuses on the experience of being made redundant. A qualitative study conducted in Australia involved phenomenological, in-depth interviews with middle- and senior-level executives. Ten respondents were interviewed about their experiences of being made redundant. What is evident from their stories is a clear passage of "being disposed of" differing only in whether their fate was evident prior to their disposal - "the writing on the wall" - or whether it was a complete shock - "a bolt from the blue". Ultimately, whether respondents knew what was coming or not, the process was often shocking, hurtful, humiliating, and harsh. Many respondents reported going through the process of being made redundant more than once. All believed it could have been handled better.

Task completion with partially-failed manipulators

An effort to maintain the availability of partially failed manipulator is addressed based on redundant trajectories obtained by primitive constraints. The objective is to facilitate the existing manipulators to continue their point to point motion tasks when a non catastrophic fault occurs into a joint. The fault is assumed as a joint locked failure. This is achieved through fault to primitive constraints mapping which gives the primitive constraints due to the faults. Then they are applied to update the manipulator constraints for the trajectory planning. Then it purposes a new trajectory in the case of availability. Finally the method is applied for a 6DOF manipulator and validated under a fault scenario within a simulation study and the results are presented.

A class of optimal fault tolerant Jacobian for minimal redundant manipulators based on symmetric geometries

Design of locally optimal fault tolerant manipulators has been recently addressed via using the constraints of the desired null space for the Jacobian matrix of the manipulators. In the present paper the Jacobian matrices for optimal fault tolerance are presented based on geometric properties of column vectors instead of the null space. They are equally fault tolerant to a single joint failure from the worst-case relative manipulability and worst-case dexterity points of view. The optimality is achieved through a symmetric distribution of points on spheres.

Optimal fault tolerant Jacobian matrix generators for redundant manipulators

The design of locally optimal fault-tolerant manipulators has been previously addressed via adding constraints on the bases of a desired null space to the design constraints of the manipulators. Then by algebraic or numeric solution of the design equations, the optimal Jacobian matrix is obtained. In this study, an optimal fault-tolerant Jacobian matrix generator is introduced from geometric properties instead of the null space properties. The proposed generator provides equally fault-tolerant Jacobian matrices in R3 that are optimally fault tolerant for one or two locked joint failures. It is shown that the proposed optimal Jacobian matrices are directly obtained via regular pyramids. The geometric approach and zonotopes are used as a novel tool for determining relative manipulability in the context of fault-tolerant robotics and for bringing geometric insight into the design of optimal fault-tolerant manipulators.