Hydrological regime and macrophyte assemblages in temporary floodplain wetlands: implications for detecting responses to environmental water allocations

This study describes the macrophyte assemblages of temporary floodplain wetlands situated on the floodplain of the Murray River, southeast Australia. Wetlands in the study are subject to flooding, the frequency, duration, and magnitude of which are dictated by the current, regulated river-flow regime. Our aim was to examine the influence of the existing flooding regime on macrophyte assemblages and to trial a monitoring program, based on a multiple before-after-control-impact (MBACI) design, to detect the impact of proposed environmental water allocations (EWAs) on the wetlands. Two categories of flooding regime were identified based on the flow magnitudes required for flooding to occur (flooding thresholds). In this scheme, wetlands with relatively low flooding thresholds are classed as ‘impact’ and those with higher thresholds are classed as ‘control.’ The wetlands were surveyed over a two-year period that incorporated at least one wetting-drying cycle at all wetlands. Results showed significant differences between survey times (season and year), but differences between flooding regime categories were significant only for some components of macrophyte assemblages. Differences between survey dates appear to reflect largely short-term responses to the most recent flood events. However, macrophyte differences observed between control and impact wetlands reflected the cumulative effect of flood events over several years. Differences between control and impact wetlands were strongest for post-flooding surveys based on full assemblages (using ANOSIM) and among specific taxa and functional groups (using ANOVA). Power to detect differences between control and impact wetlands was greatest for species richness and total abundance, but taxa with low variability among wetlands, and hence good power, were actually less sensitive to hydrologic change. We conclude that the MBACI design used in this study will be most effective in detecting wetland ecosystem responses to the implementation of EWAs if response variables are carefully chosen based on their sensitivity to hydrologic change.

Biobsorbent properties of biosolids for aqueous zinc, manganese and cyanide removal

Biosolids were used to remove zinc, manganese and cyanide from mining wastewaters. The effect of aqueous parameters and reaction variables on contaminant biosorption was quantified. The mechanism of removal was adsorption onto amine and carboxyl functional groups. Immobilisation was investigated to overcome problems of swelling and disintegration of the biosolids.

Adhesion of polymers

Most industrially applied polymer resins and composites have low surface free energy and lack polar functional groups on their surface, resulting in inherently poor adhesion properties. A strong research momentum to understand polymer adhesion in the last decade has been motivated by the growing needs of the automotive and aerospace industries for better adhesion of components and surface coatings. This paper reviews the recent research efforts on polymer adhesion with a special focus on adhesion mechanisms. It starts with an introduction to adhesion with explanatory notes on adhesion phenomena. Recent research on the adhesion mechanisms of mechanical coupling, chemical bonding and thermodynamic adhesion is then discussed. The area of adhesion promoters is reviewed with the focus on plasma and chemical treatments, along with direct methods for adhesion measurement. The topics of polymer blends and reactive polymerization are considered and the interactions with adhesion mechanisms are reported. The concluding section provides recommendations regarding future research on the contentious aspects of currently accepted adhesion mechanisms and on strategies for enhancing polymer adhesion strength.

Combined continuous wave and pulsed plasma modes : For more stable interfaces with higher functionality on metal and semiconductor surfaces

A novel approach to producing improved bio-interfaces by combining continuous wave (CW) and pulsed plasma polymerization (PP) modes is reported. This approach has enabled the generation of stable interfaces with a higher density of primary amine functionality on metal, ceramic and semiconductor surfaces. Heptylamine (HA) was used as the amine-precursor. In this new design, a thin CW PPHA layer is introduced to provide strong cross-linking and attachment to the metal or semiconductor surfaces and to provide a good foundation for better bonding a pulsed PPHA layer with high retention of functional groups. The combined mode provides the pulsed mode advantage of a 3-fold higher density of primary amines, while retaining much of the markedly higher stability in aqueous solutions of the continuous mode.

Superhydrophobic fabrics from hybrid silica sol-gel coatings: Structural effect of precursors on wettability and washing durability

Particle-containing silica sol was synthesized by co-hydrolysis and co-condensation of two silane precursors, tetraethylorthosilicate (TEOS) and an organic silane composed of a non-hydrolyzable functional group (e.g., alkyl, flourinated alkyl, and phenyl), and used to produce superhydrophobic coatings on fabrics. it has been revealed that the non-hydrolyzable functional groups in the organic silanes have a considerable influence on the fabric surface wettability. When the functional group was long chain alkyl (C16), phenyl, or flourinated alkyl (C8), the treated surfaces were highly superhydrophobic with a water contact angle (CA) greater than 170°, and the CA value was little affected by the fabric type. The washing durability of the superhydrophobic coating was improved by introducing the third silane containg epoxide group, 3-glycidoxypropyltrimethoxsilane (GPTMS), for synthesis. Although the presence of epoxide groups in the coating slightly reduced the fabrics' superhydrophobicity, the washing durability was considerably improved when polyester and cotton fabrics were used as substrates.

Tailoring the surface chemistry of carbon fiber and E-glass composites for improved adhesion

The main challenges in the manufacture of composite materials are low surface energy and the presence of silicon-containing contaminants, both of which greatly reduce surface adhesive strength. In this study, carbon fiber (CF) and E-glass epoxy resin composites were surface treated with the Accelerated Thermo-molecular adhesion Process (ATmaP). ATmaP is a multiaction surface treatment process where tailored nitrogen and oxygen functionalities are generated on the surface of the sample through the vaporization and atomization of n-methylpyrrolidone solution, injected via specially designed flame-treatment equipment. The treated surfaces of the polymer composites were analyzed using XPS, time of flight secondary ion mass spectrometry (ToF-SIMS), contact angle (CA) analysis and direct adhesion measurements. ATmaP treatment increased the surface concentration of polar functional groups while reducing surface contamination, resulting in increased adhesion strength. XPS and ToF-SIMS showed a significant decrease in silicon-containing species on the surface after ATmaP treatment. E-glass composite showed higher adhesion strength than CF composite, correlating with higher surface energy, higher concentrations of nitrogen and CO functional groups (from XPS) and higher concentrations of oxygen and nitrogen-containing functional groups (particularly C₂H₃O⁺ and C₂H₅NO⁺ molecular ions, from ToF-SIMS).

Australian waterbirds : time and space travellers in dynamic desert landscapes

Australia’s waterbirds are mostly nomadic, capitalising on highly variable aquatic resources in the arid interior (70% of the continent) for feeding and breeding. Waterbirds, unlike most aquatic organisms, can move between catchments, exploiting habitat wherever it occurs. In Australia, patterns of resource availability for waterbirds are mostly pulsed with peaks of productivity, coinciding with flooding and differing in time and space, affecting individuals, species and functional groups of waterbirds. Australian waterbirds are no different from waterbirds elsewhere, with their behaviour reflecting broad-scale resource availability. They respond to changing patterns of resource distribution, with rapid movements at spatial and temporal scales commensurate with the dynamics of the resource. The most serious conservation threat to waterbirds is a bottleneck in resource availability, leading to population declines, increasingly forced by anthropogenic impacts. River regulation and other threats (e.g. draining) reduce the availability of wetland habitat and decrease the probability of viable resource patches. It is axiomatic that waterbirds need water and such population bottlenecks may occur when the availability of water across the continent is limited. The rehabilitation of regulated rivers with environmental flows and protection of naturally flowing rivers in the arid region are essential for long-term sustainability of Australia’s waterbird populations.

Proton conductive composite membranes

In this work we investigated the synthesis of composite organic and inorganic membranes for proton conduction. Particles derived from metal alkoxides (M(OR)n) sol-gel processes (Ti, Zr, W with phosphoric acid) were embedded in polymeric matrices of poly-vinyl alcohol, (3-glycidoxypropyl)-trimethoxysilane and ethylene glycol. The structure of the composite membranes was complex as several IR peaks were convoluted, indicating the assignment of several functional groups. However, the peaks assigned to OH groups reduced in intensity in the composite membranes, indicating that cross-linking of hydroxyl groups in the organic and inorganic phases of the membrane may have occurred. The particles allowed for re-arrangement of the polymer matrix, as crystallinity was reduced compared to a polymer blank membrane. The composite membrane process resulted in homogeneous dispersion of nanoparticles into the polymer film. Proton conduction of the inorganic phase was mainly dominated by titania. Binary mixtures of titania phosphate (sample name TiP) resulted in proton conduction of 7.15 × 10−2 S.cm−1, one order of magnitude higher than zirconia phosphate (ZrP). The addition of Zr and W to TiP forming ternary or quaternary phases also led to lower proton conduction as compared to TiP. Similar trends were also observed for the composite membranes, though the TiP composite membrane proton conduction reduced after several hours of testing at 50°C, which was mainly attributed to acid leaching.

Recent progress on biosorption of heavy metals from liquids using low cost biosorbents : characterization, biosorption parameters and mechanism studies

A significant number of biosorption studies on the removal of heavy metal from aqueous solutions have been conducted worldwide. Nearly all of them have been directed towards optimizing biosorption parameters to obtain the highest removal efficiency while the rest of them are concerned with the biosorption mechanism. Combinations of FTIR, SEM-EDX, TEM as well as classical methods such as titrations are extremely useful in determining the main processes on the surfaces of biosorbents. Diverse functional groups represented by carboxyl, hydroxyl, sulfate and amino groups play significant roles in the biosorption process. Solution pH normally has a large impact on biosorption performance. In brief, ion exchange and complexation can be pointed out as the most prevalent mechanisms for the biosorption of most heavy metals.

Controlled surface modification of boron nitride nanotubes

Controlled surface modification of boron nitride nanotubes has been achieved by gentle plasma treatment. Firstly, it was shown that an amorphous surface layer found on the outside of the nanotubes can be removed without damaging the nanotube structure. Secondly, it was shown that an oxygen plasma creates nitrogen vacancies that then allow oxygen atoms to be successfully substituted onto the surface of BNNTs. The percentage of oxygen atoms can be controlled by changing the input plasma energy and by the Ar plasma pre-treatment time. Finally, it has been demonstrated that nitrogen functional groups can be introduced onto the surface of BNNTs using an N₂ + H₂ plasma. The N₂ + H₂ plasma also created nitrogen vacancies, some of which led to surface functionalization while some underwent oxygen healing.

Comparing towed and baited underwater video techniques for assessing temperate marine fishes

Accurate estimates of fish species occurrence are important to any species’ assessments and distribution model. With increasing emphasis on nondestructive sampling, underwater video techniques are commonly used without a thorough understanding of their advantages and disadvantages. This study compared data collected from baited remote underwater stereo-video systems (stereo BRUVS) and towed-video systems to determine; (1) the differences between these video techniques in terms of fish assemblages, functional groups (i.e. pelagic carnivore, epibenthic carnivore/omnivore or herbivore) and observability (i.e. conspicuous or cryptic), and (2) what impact do these two techniques have on the interpretation of spatially-explicit, predictive models. We found stereo BRUVS and towedvideo techniques recorded very different assemblages, functional groups and observability categories across structurally complex benthic biological habitats (i.e. macroalgae dominated habitats). However, as the habitat complexity became less (e.g. seagrass and areas with no visible macro-biota) both techniques appeared to provide similar fish assemblage information. We also found considerable differences in the predicted extents of habitat suitability between the two video techniques.

Accessing highly-halogenated flavanones using protic ionic liquids and microwave irradiation

A series of highly-functionalized 2'-hydroxychalcones have been synthesized using a microwave-assisted Claisen-Schmidt condensation. Conversion of these 2'-hydroxychalcones to their corresponding flavanones was then performed utilizing protic ionic liquids (pIL) and microwave irradiation. This methodology drastically reduces reaction time to 15 minutes compared to typical thermal methods (24 hrs) and is tolerant to a broad range of functional groups. Several chalcones reported bear four and five substituents - a degree of substitution rarely reported in the literature.

Understanding wettability changes from practical plasma functionalization of carbon nanotubes

Combining continuous wave and pulsed plasma modes enables strong interfacial bonding of high levels of desired surface functional groups. The method has been applied to a thin film of multiwalled carbon nanotubes, a nanostructured and relatively inert material, using N₂ + H₂ plasma. A high density of primary amine groups (~2.6%) was achieved without damaging the tube surface. Contact angle measurements, using different probe liquids, plus model calculations of surface energy agree well with the spectroscopy and electron microscope results, i.e., the polar part shows significant changes while the non-polar part was unchanged. These results indicate that the wettability changes in the thin film of carbon nanotubes by the plasma treatment are due to the changes in surface chemistry. This confirms the effectiveness and practicality of the improved plasma method that should greatly help the use of nanotubes in applications from biomaterials to nanocomposites.

Molecular identification of marine yeast and its spectroscopic analysis establishes unsaturated fatty acid accumulation

Marine microbes are competent organisms, some of which can accumulate large amounts of lipids. A yeast strain, Rhodotorula mucilaginosa AMCQ8A was isolated from the marine water of the Queenscliff region, Victoria, Australia. The yeast isolate was identified by sequencing 18s rDNA genes. Scanning electron microscopy images revealed scars on the surface of the yeast cells. The Fourier transform infrared spectroscopy microspectroscopy studies demonstrated the presence of unsaturated fatty acids by differential microscopic analysis. The sharp band at 1745 cm^-1 was represented by ν(C=O) stretches of ester functional groups from lipids and fats, and therefore indicated the presence of total lipids produced by the cells. Over 65% of the fatty acids from the yeast strain were analyzed as C¹⁶ and C^18:1 with omega-3 content from about 6% to 7%. Thus, this marine-derived yeast could be a potential source of lipids, including omega-3 fatty acids. 2012, The Society for Biotechnology, Japan. All rights reserved.

Deposition and wetting characteristics of polyelectrolyte multilayers on plasma-modified porous polyethylene

Hydrophilic and chemically reactive porous media were prepared by adsorbing functional polymers at the surface of sintered polyethylene membranes. Modification of the membrane was accomplished by first exposing the membrane to an oxygen glow discharge gas plasma to introduce an electrostatic charge at the membrane surfaces. Cationic polyelectrolyte polyethylenimine (PEI) was adsorbed from solution to the anionic-charged surface to form an adsorbed monolayer. The adsorption of a second anionic polyelectrolyte onto the PEI layer allows further modification of the membrane surface to form a polyelectrolyte-bilayer complex. The conformation and stability of the adsorbed monolayers and bilayers comprising the modified surface are probed as a function of the polymer structure, charge density, and solubility. Using X-ray photoelectron spectroscopy analysis, we demonstrate that the presence of the polyelectrolyte multilayers drastically increases the density and specificity of the functional groups at the surface, more than what can be achieved through the plasma modification alone. Also, using the wicking rate of deionized, distilled water through the porous membrane to gauge the interfacial energy of the modified surface, we show that the membrane wicking rate can be controlled by varying the chemistry of the adsorbing polyelectrolytes and, to a lesser extent, by adjusting the polarity or ionic strength of the polyelectrolyte solution.