Guided wave propagation and spectral element method for debonding damage assessment in RC structures

A concrete–steel interface spectral element is developed to study the guided wave propagation along the steel rebar in the concrete. Scalar damage parameters characterizing changes in the interface (debonding damage) are incorporated into the formulation of the spectral finite element that is used for damage detection of reinforced concrete structures. Experimental tests are carried out on a reinforced concrete beam with embedded piezoelectric elements to verify the performance of the proposed model and algorithm. Parametric studies are performed to evaluate the effect of different damage scenarios on wave propagation in the reinforced concrete structures. Numerical simulations and experimental results show that the method is effective to model wave propagation along the steel rebar in concrete and promising to detect damage in the concrete–steel interface.

Responses of Arabidopsis thaliana to UV-C radiation and Hyaloperonospora arabidopsidis

 This work demonstrates the relationship between two seemingly unrelated stresses, and shows that exposing plants to UV radiation can increase their resistance to disease caused by a plant pathogen.

Quantitative assessment of through-thickness crack size based on Lamb wave scattering in aluminium plates

The interaction of Lamb wave modes at varying frequencies with a through-thickness crack of different lengths in aluminium plates was analysed in terms of finite element method and experimental study. For oblique-wave incidence, both numerical and experimental results showed that the wave scattering from a crack leads to complicated transmission, reflection and diffraction accompanied by possible wave-mode conversion. A dual-PZT actuation scheme was therefore applied to generate the fundamental symmetrical mode (S0) with enhanced energy to facilitate the identification of crack-scattered wave components. The relationship between crack length and the reflection/transmission coefficient obtained with the aid of the Hilbert transform was established, through which the crack length was quantitatively evaluated. The effects of wavelength of Lamb waves and wave diffraction on the properties of the reflection and transmission coefficients were analysed.

X-ray diffraction line broadening from gold and platinum thin films

X-ray diffraction line profile analysis has been used to study the microstructure of (Ill) oriented gold and platinum thin films deposited by thermal evaporation and DC magnetron sputtering. In addition to crystallite size broadening, the profiles from these films displayed broadening arising from dislocations. A parallel investigation, using transmission electron microscopy (TEM) was undertaken to study the nature of dislocations formed, and to provide information on the dimensions of the crystallite columns in the films. X-ray data were collected at room temperature to determine the anisotropy of the broadening with (hkl), using a Siemens D5000 powder diffractometer (CuKa radiation) and two high-resolution synchrotron instruments (BM 16 at the ESRF [A=0.35A] and station 2.3 at the Daresbury laboratory. Two approaches to instrument deconvolution were investigated; Fourier deconvolution and fundamental parameters profile fitting, using Lab6 as a reference material to determine the instrument profile function. After removal of the crystallite size broadening contribution from the measured integral breadths, the residual microstrain broadening was modelled assuming dislocations based on a FCC a/2<110>{ Ill} slip system. The results of the X-ray analysis agreed with dark field TEM micrographs, which showed that many of the crystallites contained dislocations of mixed character (screw- edge).

Dielectric characterization of conducting textiles using free space transmission measurements: accuracy and methods for improvement

The dielectric behaviour of in-situ polymerized thin polypyrrole (PPy) films on synthetic textile substrates were obtained in the 1–18 GHz region using free space transmission and reflection methods. The PPy/para-toluene-2-sulphonic acid (pTSA) coated fabrics exhibited an absorption dominated total shielding effectiveness (SE) of up to −7.34 dB, which corresponds to more than 80% of incident radiation. The permittivity response is significantly influenced by the changes in ambient conditions, sample size and diffraction around the sample. Mathematical diffraction removal, time-gating tools and high gain horns were utilized to improve the permittivity response. A narrow time-gate of 0.15 ns produced accurate response for frequencies above 6.7 GHz and the high gain horns further improved the response in the 7.5–18 GHz range. Errors between calculated and measured values of reflection were most commonly within 2%, indicating good accuracy of the method.

Extreme surfing : personal and psychological aspects of big wave riders

This qualitative study investigated personal and psychological aspects of big wave riders. A cross-sectional design with non probability purposive sampling was used to gain personal interviews with 32 elite surfers who regularly ride big, life threatening waves. Each athlete was asked three open questions: 1. What do you think are the most important qualities and attributes a surfer needs for riding big waves? 2. What type of mindset is best for riding big waves?, and 3.What motivates you to ride big waves? Content analysis of the taped interview transcripts revealed seven key qualities and attributes including having a thrill seeking, confident and goal oriented personality, a high level of mental strength and control, and an intimate relationship with the ocean. The best mindset included an individually defined arousal level, a committed attitude, and a simple, yet highly aware, focus. Motivations were primarily intrinsic, though drives indicative of a behavioral addiction to the act of riding big waves also emerged. Evidence of common developmental stages for riding big waves also arose from the interviews. Optimal mental approach and preparation techniques are discussed that will enable big wave riders, and other extreme athletes, to more safely and successfully manage extreme situations.

Combined continuous wave and pulsed plasma modes : For more stable interfaces with higher functionality on metal and semiconductor surfaces

A novel approach to producing improved bio-interfaces by combining continuous wave (CW) and pulsed plasma polymerization (PP) modes is reported. This approach has enabled the generation of stable interfaces with a higher density of primary amine functionality on metal, ceramic and semiconductor surfaces. Heptylamine (HA) was used as the amine-precursor. In this new design, a thin CW PPHA layer is introduced to provide strong cross-linking and attachment to the metal or semiconductor surfaces and to provide a good foundation for better bonding a pulsed PPHA layer with high retention of functional groups. The combined mode provides the pulsed mode advantage of a 3-fold higher density of primary amines, while retaining much of the markedly higher stability in aqueous solutions of the continuous mode.

The nuclear exclusion : what does it mean and who has been tampering with it?

A nuclear exclusion appears in all general insurance policies. Since its introduction to Australia and New Zealand in the 1960s this exclusion has seen almost no change. So what are the reasons for this article? There are two reasons. First, there has been a misunderstanding on the part of some in the industry about the scope of this exclusion. This results in unnecessary alterations to the policy. The other is that a new wording is emerging some sections of the market which could be tar-reaching in its effect. The purpose of this article is to examine several aspects related to the exclusion. The first section examines the nature and extent of exposures in relation to radiation and nuclear energy and serves as background to under standing the exclusion wording. Section two provides the reasons for the inclusion of the clause and its historical origins. Section three addresses the intended scope of the current exclusion and the final section examines the scope of a new wording that is appearing and the possible implications that may result.

Simultaneous presentation of measured and calculated environmental results

Continuous measurement of internal and external environmental parameters is critical to our understanding of how buildings perform. Yet, the quantity and variety of time-series data can be quite overwhelming as well as onerous to decipher and present. In addition to this, is the fact that several of the collected data are useless in their raw format unless processed through algorithms to obtain identifiable and meaningful results.
These circumstances challenge the conventional way we present accumulated data and their processed outputs in order to get a better understanding of how and why the environmental performance occurred. It would be ideal if all of the collected and processed data could be presented in a simultaneous, yet, useful format. It is exactly the intention of this paper to suggest and present such a process as well as its format.
An example case study is provided where several parameters (air velocity, mean radiant temperature, humidity and air temperature) are measured periodically to calculate a time-series of internal comfort performance. However, external conditions of solar radiation and solar position as well as air temperature drive the interior building surface temperatures and help to explain the end result of internal comfort.
A program has been written to present the various sets of data graphically, in an integrated manner, animated as a function of time. The animation shows solar position, a cursor scanning weather data, the changing infra-red image and a representation of the resulting internal comfort performance throughout the
monitored period.

Damage identification of steel beams using local and global methods

Structural condition monitoring methods can be generally classified as local and global. While the global method needs only a small number of sensors to measure the low-frequency structural vibration properties, the acquired information is often not sufficiently sensitive to minor damages in a structure. Local methods, on the other hand, could be very sensitive to minor damages but their detection range is usually small. To overcome the drawbacks and take advantage of both methods, an integrated condition monitoring system has been recently developed for structural damage detection, which combines guided wave and structural vibration tests. This study aims at finding a viable damage identification method for steel structures by using this system. First, a spectral element modelling method is developed, which can simulate both wave propagation and structural vibration properties. Then the model is used in updating analysis to identify crack damage. Extensive numerical simulations and model updating works are conducted. The experimental and numerical results suggest that simply combining the objective functions cannot provide better structural damage identification. A two-stage damage identification scheme is more suitable for identifying damage in steel beams.

Electromagnetic field and other physical methods influencing cell growth in mammal cell culture systems

The growth rate of cultured mammalian cells can be influenced by chemical and physical methods such as electromagnetic fields (EMF), light, temperature and plasma. These physical methods have a number of well documented effects on mammalian cells including modification of gene expression, cell cycle, invasion, motility, cell viability, proliferation, apoptosis and mammosphere numbers. A study of the existing literature confirms that the impact of physical method on mammalian cells depends on the cell type, culture environment, exposure time, frequency, wave shape, and amount of dose. The modification of cell proliferation and apoptosis is necessary for cells products, tissue engineering, and therapy. In this article, we reviewed the impact of four physical methods on the growth rate and viability of cells. Plasma is the best method among fours because we can get desired result ranging from increasing cell proliferation to inducing apoptosis depending on the dose.

En-gendering the nation : gender-bending and nationalism in Miles Franklin's 'My brilliant career' and Emily Lawless's 'Grania: The story of an Island'

Writing in the lee of first-wave feminism and in an era of nation-invention, the Irish Ascendancy novelist, Emily Lawless, and the aggressively Australian Miles Franklin (of Irish, English and German extraction and coming from families who were pastoralists) wrote novels of adolescence, respectively, 'Grania: the Story of an Island' (1892) and 'My Brilliant Career' (1901). Similar and different in many ways, they both wrote as women and self-consciously inserted themselves into nation-inscribing projects with an eye to overseas readerships, and they played fast and loose with class. Curiously, both contributed to the process of transforming 'nowhere-places' into iconic nationalist places: Franklin put the Monaro on the map (a region that was a nationalist icon before the 'Red Centre' usurped its place); and Lawless wrote in ethnographic ways about the Aran Islands more than a decade before J.M. Synge tramped westward in search of the 'Peasant Quality', so beloved of the Abbey Theatre playwrights and audiences. Most compellingly, they wrote of the near-pathologies of masculinities within nationalist agendas, and of marriage and sexuality. This article examines the novels comparatively and contrastively and asks uncomfortable questions about why and how their interventions were untimely.

En-Gendering the Nation: Gender-bending and Nationalism in Miles Franklin’s My Brilliant Career and Emily Lawless’ Grania: the Story of an Island

Writing in the lee of first-wave feminism and in an era of nation-invention, the Irish ascendancy novelist, Emily Lawless, and the aggressively Australian Miles Franklin (of Irish, English and German extraction and coming from families who were pastoralists) wrote novels of adolescence, Grania: The Story of an Island (1892) and My Brilliant Career (1901) respectively. Similar and different in many ways, they both write as women, and self-consciously insert themselves into nation-inscribing projects with an eye to overseas readerships, and they play fast and loose with class. Curiously, both contributed to the process of transforming ‘nowhere-places’ into iconic nationalist places: Franklin put the Monaro on the map (a region that was a nationalist icon before the ‘Red Centre’ usurped its place); and Lawless wrote in ethnographic ways about the Aran Islanders more than a decade before Synge tramped westward in search of the ‘Peasant Quality’ so beloved of the Abbey playwrights and audiences. Most compellingly, they write of the near-pathologies of masculinities within nationalist agendas, and of marriage and sexuality. This paper examines the novels comparatively and contrastively and asks uncomfortable questions about why and how their interventions were untimely.