Studies of a wear resistant cast iron

 The objective of this investigation was to set down (on the base of the results obtained by the examination of white cast iron alloys with different content of the alloying elements) a correlation between chemical composition and microstructure, on one hand, and the properties relevant for this group of materials, i.e., abrasion wear resistance and fracture toughness, on the other. Experimental results indicate that the volume fracture of the carbide phase, carbide size and distribution, as well as the morphology of eutectic colonies, had an important influence on the wear resistance of white cast iron alloys under low-stress abrasion conditions, whereas fracture toughness was determined largely by the matrix microstructure.

Slurry pump side-liner wear : comparison of some laboratory and field results

The current work compares some slurry pump lab wear results with the wear found across different field applications with d₈₅ particle size ranging from 100 to 4000mm. Side-liner wear life data has been collected for two different impeller geometries and two different material classes (cast iron and natural rubber). Different field wear patterns have been photographed and categorised on the basis of particle size. The field wear patterns showed close similarity to the lab wear patterns particularly in the areas of localised gouging. Wear rates are also compared for the different geometries. Overall trend of wear with particle size for the white iron parts was similar to the grey iron lab tests albeit at significantly lower wear rates. In general, the wear with the rubber side-liner was less at smaller particle sizes but greater for particles larger than d8The current work compares some slurry pump lab wear results with the wear found across different field applications with d₈₅ particle 10 size ranging from 100 to 4000mm. Side-liner wear life data has been collected for two different impeller geometries and two different 11 material classes (cast iron and natural rubber). Different field wear patterns have been photographed and categorised on the basis of particle 12 size. The field wear patterns showed close similarity to the lab wear patterns particularly in the areas of localised gouging. Wear rates are 13 also compared for the different geometries. Overall trend of wear with particle size for the white iron parts was similar to the grey iron lab 14 tests albeit at significantly lower wear rates. In general, the wear with the rubber side-liner was less at smaller particle sizes but greater for 15 particles larger than d₈₅ of about 700mm. © 2001 Elsevier Science B.Y. All rights reserved.

Prediction of residual stresses in roller burnished components : a finite element approach

Surface finish is an important factor in creating the durable metal components, and fatigue strength can be improved if compressive residual stresses are produced in the surface. Burnishing is a finishing process and compressive residual stresses are induced during the process. The present study of minimizing the surface roughness based on the experimental work, and finite element model was developed to evaluate the analytical results. Commercial purity Mild Steel and Aluminium were selected as work specimens and a high carbon high chromium roller was used as a tool for the burnishing process.

Hydrothermal synthesis of dioctahedral smectites: The Al-Fe3+chemical series. Part II: crystal-chemistry

The crystal-chemistry of a series of synthetic Al-Fe3+ smectites was studied in detail using near and mid infrared spectroscopy. Chemical and NIR data indicated a quite complete range of octahedral Al for Fe3+ substitution, and therefore, the solid-solution between beidellite and nontronite end-members was continuous and complete. The wavenumbers of several infrared absorption bands were correlated with the chemistry of the synthetic smectites, providing a useful tool to constrain their structural formulae and also for assisting in assignments of similar bands in natural smectites. The Al and Fe3+ cations were shown to be randomly distributed in the octahedral sheet of synthesized smectites. Despite the high availability of iron during synthesis, generally only a small amount of tetrahedral Fe3+ was observed.

Influence of chromium content on the dry machining performance of cathodic arc evaporated TiA1N coatings

Physical vapour deposition (PVD) titanium aluminium nitride coated cutting tools are used extensively in global manufacturing for reducing production costs and improving productivity in a number of aggressive metal-cutting operations, namely, dry and high-speed machining. In this investigation, the performance of Ti1−xAlxN and Ti1−x−yAlxCryN coatings was assessed on Co-HSS twist drills used to machine grey cast iron. The failure criterion for drills was defined as a critical sized flank wear land at the outer corners of the drills. Using this criterion, the average tool life of uncoated twist drills was increased by factors of 2.5, 3.0 and 3.0 by Ti0.59Al0.41N, Ti0.27Al0.19Cr0.54N and Ti0.21Al0.14Cr0.65N coatings, respectively. Notwithstanding the similar increase in average tool life, the Ti1−x−yAlxCryN coatings produced more consistent results than the Ti1−xAlxN coated drills with standard deviations of 67, 3 and 19 holes, respectively. This result has significant practical implications in manufacturing, since drills are not replaced on an individual basis, but rather on a preset tool change frequency. The present paper discusses the performance of Ti1−xAlxN and Ti1−x−yAlxCryN coated drills in terms of average and practical drill life and concludes with remarks on the characterisation of PVD coatings and their significance on the performance of Co-HSS twist drills when dry machining grey cast iron.

High-speed pollen release in the white mulberry tree, Morus alba L

Anemophilous plants described as catapulting pollen explosively into the air have rarely attracted detailed examination. We investigated floral anthesis in a male mulberry tree with high-speed video and a force probe. The stamen was inflexed within the floral bud. Exposure to dry air initially resulted in a gradual movement of the stamen. This caused fine threads to tear at the stomium, ensuring dehiscence of the anther, and subsequently enabled the anther to slip off a restraining pistillode. The sudden release of stored elastic energy in the spring-like filament drove the stamen to straighten in less than 25 μs, and reflex the petals to velocities in excess of half the speed of sound. This is the fastest motion yet observed in biology, and approaches the theoretical physical limits for movements in plants.

Mild and cost-effective synthesis of iron fluoride-graphene nanocomposites for high-rate Li-ion battery cathodes

Exploring high performance cathode materials is essential to realize the adoption of Li-ion batteries for application in electric vehicles and hybrid electric vehicles. FeF3, as a typical iron-based fluoride, has been attracting considerable interest due to both the high electromotive force value of 2.7 V and the high theoretical capacity of 237 mA h g_1 (1e_ transfer). In this study, we report a facile lowtemperature solution phase approach for synthesis of uniform iron fluoride nanocrystals on reduced graphene sheets stably suspended in ethanol solution. The resulting hybrid of iron fluoride nanocrystals and graphene sheets showed high specific capacity and high rate performance for iron fluoride type cathode materials. High stable specific capacity of about 210 mA h g_1 at a current density of 0.2 C was achieved, which is much higher than that of LiFePO4 cathode material. Notably, these iron fluoride/ nanocomposite cathode materials demonstrated superior rate capability, with discharge capacities of 176, 145 and 113 mA h g_1 at 1, 2 and 5 C, respectively.

Copper-dependent iron assimilation pathway in the model photosynthetic eukaryote chlamydomonas reinhardtii

The unicellular green alga Chlamydomonas reinhardtii is a valuable model for studying metal metabolism in a photosynthetic background. A search of the Chlamydomonas expressed sequence tag database led to the identification of several components that form a copper-dependent iron assimilation pathway related to the high-affinity iron uptake pathway defined originally for Saccharomyces cerevisiae. They include a multicopper ferroxidase (encoded by Fox1), an iron permease (encoded by Ftr1), a copper chaperone (encoded by Atx1), and a copper-transporting ATPase. A cDNA, Fer1, encoding ferritin for iron storage also was identified. Expression analysis demonstrated that Fox1 and Ftr1 were coordinately induced by iron deficiency, as were Atx1 and Fer1, although to lesser extents. In addition, Fox1 abundance was regulated at the posttranscriptional level by copper availability. Each component exhibited sequence relationship with its yeast, mammalian, or plant counterparts to various degrees; Atx1 of C. reinhardtii is also functionally related with respect to copper chaperone and antioxidant activities. Fox1 is most highly related to the mammalian homologues hephaestin and ceruloplasmin; its occurrence and pattern of expression in Chlamydomonas indicate, for the first time, a role for copper in iron assimilation in a photosynthetic species. Nevertheless, growth of C. reinhardtii under copper- and iron-limiting conditions showed that, unlike the situation in yeast and mammals, where copper deficiency results in a secondary iron deficiency, copper-deficient Chlamydomonas cells do not exhibit symptoms of iron deficiency. We propose the existence of a copper-independent iron assimilation pathway in this organism.

Breeding biology, adult survival and territoriality of the white-browed treecreeper (climacteris affinis) in north-west Victoria, Australia

This is the first study to present empirical data describing the social organisation and breeding biology of the White-browed Treecreeper (Climacteris affinis). The species is typical of many small Australian passerines in that it has high annual survival (~80%), small clutches (mean = 1.95 ± 0.05), long breeding seasons (eggs laid August to November) and long incubation (17–18 days) and nestling periods (25–26 days), corrected for body weight. Reproductive effort is modified in response to variation in climatic conditions by adjusting the commencement of breeding and number of clutches laid per season, which is facilitated by an extended breeding season. White-browed Treecreepers occupied relatively large (mean = 8.4 ± 0.8 ha), all-purpose territories throughout the year. However, unlike many group territorial birds, territory size was not related to the number of occupants. The role of food limitation and climatic variability in relation to territory dispersion and life-history traits is explored. Facultative cooperative breeding was confirmed. Cooperative groups were formed through male philopatry, with usually only one, but up to three, male helpers present in a moderate fraction (35%) of breeding units. Thus, all species of Climacteris are now confirmed as facultative cooperatively breeding species, which provides further evidence for the aggregation of cooperative breeders at the generic level in mixed (i.e. cooperative and pair breeders) phylogenetic clades. In C. affinis, males may attain breeding positions through inheritance of their natal territory or by filling vacancies in nearby territories. Females obtained breeding positions by ‘floating’ as non-breeding residents in established territories, waiting for a vacancy to arise.

Person-organization congruence of high performance values in Australian universities

This study explores the applicability of the personal and organizational value clusters identified by Abbott, White & Charles, (2005) employing the McDonald & Gandz (1991) list of values to university settings. It examines the personal values of business students in two universities, their perception ofthe organizational values important to their university, and measures the extent to which the personal and organizational values are consistent with 'High Performance Work Systems '. Results provide support for individual and organizational values factors similar to those found by Finegan, (2000) and Abbott et al. (2005) and consistent with Schwartz s (1992) an-cultural values hierarchy. While usiness/commerce students rated their personal values as consistent with HPWS and the major pan-cultural values, this did not match their perception of the organizations' values. The implications of personal-organizational value incongruence on motivation, satisfaction, organizational commitment and effectiveness are discussed.

General Cariappa encounters 'White Australia' : Australia, India and the Commonwealth in the 1950s

There have been a number of studies of the White Australia policy and some examination of white Australia's relationship to the new, multiracial Commonwealth that emerged after the Second World War. Drawing extensively on Indian sources, this article examines how Australia was viewed by India's high commissioner to Australia and New Zealand, General K. M. Cariappa. In the period from September 1953 to April 1956 he sparked considerable controversy by suggesting that the White Australia policy ran the risk of alienating Asian opinion and undermining the Commonwealth ideal in India and Pakistan. Cariappa maintained a high public profile throughout his stay in Australia and was widely regarded as one of the most prominent diplomats posted to Canberra in the 1950s.

Adolescent alcohol-use trajectories in the transition from high school

A cohort of 3300 students from high schools across Victoria, Australia, were surveyed regarding their patterns of alcohol consumption from mid-1993 to 1995. The first wave of data was collected halfway through the students' final year of school (year 12). Students were then resurveyed 3 months following school completion and on two subsequent occasions, each separated by 6-month intervals. Analysis of the four waves of data indicated that five longitudinal patterns (trajectories) characterized temporal trends in male and female alcohol use through the transition from high school. Stable non-use trajectories were evident for 17% of males and 16% of females. Trajectories of less than weekly use characterized 45% of females and 46% of males, and showed little tendency to escalate toward harmful use. Among those using alcohol on a weekly or more frequent basis in high school, with few exceptions, use continued with at least the same frequency, but the quantity of alcohol consumed tended to escalate over time toward harmful levels. Overall, findings indicate that patterns of alcohol use tend to be stable over time, and more frequent alcohol use during the final year of high school tends to precede potentially harmful alcohol use following high school. Encouraging those high school students who consume alcohol once per week or more often to use alcohol on a less than weekly basis may be a valuable yet neglected harm minimization strategy.