Intuitive haptic control surface for mobile robot motion control

Haptic human-machine interfaces and similar techniques to enhancing human-robotic interaction offer significant potential over conventional approaches. This work considers achieving intuitive motion control of a tracked mobile robotic platform utilising a 3D virtual haptic cone. The 3D haptic cone extends upon existing approaches by introducing of a third dimension to the haptic control surface. It is suggested that this approach improves upon existing methods by providing the human operator with an intuitive method for issuing vehicle motion commands whilst still facilitating simultaneous real-time haptic augmentation regarding the task at hand. The presented approach is considered in the context of mobile robotic teleoperation however offers potential across many applications. Using the 2D haptic control surface as a benchmark, preliminary evaluation of the 3D haptic cone approach demonstrates a significant improvement in the ability to command the robot to cease motion.

Intuitive haptic control surface for mobile robot motion control

Haptic human-machine interfaces and similar techniques to enhancing human-robotic interaction offer significant potential over conventional approaches. This work considers achieving intuitive motion control of a tracked mobile robotic platform utilising a 3D virtual haptic cone. The 3D haptic cone extends upon existing approaches by introducing of a third dimension to the haptic control surface. It is suggested that this approach improves upon existing methods by providing the human operator with an intuitive method for issuing vehicle motion commands whilst still facilitating simultaneous real-time haptic augmentation regarding the task at hand. The presented approach is considered in the context of mobile robotic teleoperation however offers potential across many applications. Using the 2D haptic control surface as a benchmark, preliminary evaluation of the 3D haptic cone approach demonstrates a significant improvement in the ability to command the robot to cease motion.

3D virtual haptic cone for intuitive vehicle motion control

Haptic human-machine interfaces and interaction techniques have been shown to offer advantages over conventional approaches. This work introduces the 3D virtual haptic cone with the aim of improving human remote control of a vehicle's motion. The 3D cone introduces a third dimension to the haptic control surface over existing approaches. This approach improves upon existing methods by providing the human operator with an intuitive method for issuing vehicle motion commands whilst simultaneously receiving real-time haptic information from the remote system. The presented approach offers potential across many applications, and as a case study, this work considers the approach in the context of mobile robot motion control. The performance of the approach in providing the operator with improved motion controllability is evaluated and the performance improvement determined.

3D virtual haptic cone for intuitive vehicle motion control

Haptic technology provides the ability for a system to recreate the sense of touch to a human operator, and as such offers wide reaching advantages. The ability to interact with the human's tactual modality introduces haptic human-machine interaction to replace or augment existing mediums such as visual and audible information. A distinct advantage of haptic human-machine interaction is the intrinsic bilateral nature, where information can be communicated in both directions simultaneously. This paper investigates the bilateral nature of the haptic interface in controlling the motion of a remote (or virtual) vehicle and presents the ability to provide an additional dimension of haptic information to the user over existing approaches [1-4]. The 3D virtual haptic cone offers the ability to not only provide the user with relevant haptic augmentation pertaining to the task at hand, as do existing approaches, however, to also simultaneously provide an intuitive indication of the current velocities being commanded.

Remote centre-of-motion control algorithms of 6-RRCRR parallel robot assisted surgery system (PRAMiSS)

In this paper a 6-RRCRR parallel robot assisted minimally invasive surgery/microsurgery system (PRAMiSS) is introduced. Remote centre-of-motion (RCM) control algorithms of PRAMiSS suitable for minimally invasive surgery and microsurgery are also presented. The programmable RCM approach is implemented in order to achieve manipulation under the constraint of moving through the fixed penetration point. Having minimised the displacements of the mobile platform of the parallel micropositioning robot, the algorithms also apply orientation constraint to the instrument and prevent the tool tip to orient due to the robot movements during the manipulation. Experimental results are provided to verify accuracy and effectiveness of the proposed RCM control algorithms for minimally invasive surgery.

Extending an industrial root controller : implementation and applications of a fast open sensor interface

An overview is given of the design and implementation of a platform for fast external sensor integration in an industrial robot system called ABB S4CPlus. As an application and motivating example, the implementation of force-controlled grinding and deburring within the AUTOFETT-project is discussed. Experiences from industrial usage of the fully developed prototype confirms the appropriateness of the design choices, thus also confirming the fact that control and software need to be tightly integrated. The new sensor can be used for the prototyping and development of a wide variety of new applications

Haptic mobility control for teleoperated rovers

Future missions involving human and robotic systems co-resident on the lunar surface may call for rovers to be teleoperated from the safety of pressurized habitats or vehicles. An approach is presented that emphasizes human-level judgment and intuition in the total control of a rover’s mobility actions. This is facilitated through human-robotic haptics interaction. The concept of a haptics cone control surface is presented, which provides a teleoperator with a means to intuitively determine the velocities he/she is commanding to control rover motion. The teleoperator is also provided with real-time, tasks-relevant haptic augmentation indicating suggestive control actions concerning the desired mobility objective. Utility of the approach for teleoperated control of steep terrain traversal is demonstrated in simulation.

Motion analysis of a robotic assisted surgery and microsurgery system - experimental verification

Motion analysis of a parallel robot assisted minimally invasive surgery/microsurgery system (PRAMiSS) and the control structures enabling it to achieve milli/micromanipulations under the constraint of moving through a fixed penetration point or so-called remote centre-of-motion (RCM) are presented in this article. Two control algorithms are proposed suitable for minimally invasive surgery (MIS) with submillimeter accuracy and for minimally invasive micro-surgery (MIMS) with submicrometer accuracy. The RCM constraint is performed without having any mechanical constraint. Control algorithms also apply orientation constraint preventing the tip to orient relative to the soft tissues due to the robot movements. Experiments were conducted to verify accuracy and effectiveness of the proposed control algorithms for MIS and MIMS operations. The experimental results demonstrate accuracy and performance of the proposed position control algorithms.

Exploiting ungrounded tactile haptic displays for mobile robotic teleoperation

Teleoperated mobile robotics offer potential use in a variety of different real-world applications including hazardous materials handling, urban search and rescue and explosive ordnance handling and disposal. Recent research discusses the use of Haptic technology in increasing task immersion and teleoperator performance. This work investigates the utility of low-cost, ungrounded tactile haptic interfaces in mobile robotic teleoperation. In order to achieve the desired implementation using only tactile sensation presents distinct challenges. Innovative haptic control methodologies providing the teleoperator with intuitive motion control and task-relevant haptic augmentation are presented within this paper.

Exploiting ungrounded tactile haptic displays for mobile robotic teleoperation

Teleoperated mobile robotics offer potential use in a variety of different real-world applications including hazardous materials handling, urban search and rescue and explosive ordnance handling and disposal. Recent research discusses the use of Haptic technology in increasing task immersion and teleoperator performance. This work investigates the utility of low-cost, ungrounded tactile haptic interfaces in mobile robotic teleoperation. In order to achieve the desired implementation using only tactile sensation presents distinct challenges. Innovative haptic control methodologies providing the teleoperator with intuitive motion control and task-relevant haptic augmentation are presented within this paper.

A secure and efficient data sharing framework with delegated capabilities in hybrid cloud

Hybrid cloud is a widely used cloud architecture in large companies that can outsource data to the publiccloud, while still supporting various clients like mobile devices. However, such public cloud data outsourcing raises serious security concerns, such as how to preserve data confidentiality and how to regulate access policies to the data stored in public cloud. To address this issue, we design a hybrid cloud architecture that supports data sharing securely and efficiently, even with resource-limited devices, where private cloud serves as a gateway between the public cloud and the data user. Under such architecture, we propose an improved construction of attribute-based encryption that has the capability of delegating encryption/decryption computation, which achieves flexible access control in the cloud and privacy-preserving in datautilization even with mobile devices. Extensive experiments show the scheme can further decrease the computational cost and space overhead at the user side, which is quite efficient for the user with limited mobile devices. In the process of delegating most of the encryption/decryption computation to private cloud, the user can not disclose any information to the private cloud. We also consider the communication securitythat once frequent attribute revocation happens, our scheme is able to resist some attacks between private cloud and data user by employing anonymous key agreement.

Dynamic output feedback control of single-link flexible manipulators

This paper presents an efficient technique to design dynamic feedback control scheme for single-link flexible manipulators.  A linear model can be derived for the robotic system using the assumed-mode method.  Conventional techniques such as pole-placement or LQR require physical measurements of all systme states,  posing a stringent requirement for its implementation.  To overcome this problem, a low-order state functional observer is proposed here for reconstruction of the state feedback control action.  The observer design involves solving an optimisation problem with the objective to generate a feedback gain that is as close as possible to that of the required feedback controller.  A condition for robust stability of the closed-loop system under the observer-based control scheme is given.  The attractive features of the propsed technique are the resulted functional state observer is of a very low order and it requires only sensor measurements of only the output- the tip position of the arm.

A simulation-based control interface layer for a high-fidelity anthropomorphic training simulator

Deakin University’s futuristic Universal Motion simulator will overcome the limitations of current motion simulator platforms by employing an anthropomorphic robot arm to provide the motion fidelity necessary to exploit the potential of modern simulation environments. Full motion simulators frequently utilize Stewart platforms to mimic the movement of vehicles during simulation. However, due to the limited motion range and dexterity of such systems, and their inability to convey realistic accelerations, they are unable to represent accurate motion characteristics. The Universal Motion Simulation aims to close the gap between the limitations of the current motion technology and real world, by introducing a flexible, modular, high-fidelity motion system that can be used for a variety of immersive training applications. The modular nature of the design allows interchangeable and configurable simulation pods to be attached to the end effectors.