Organotin-oxo clusters

This thesis reports on the development and expansion of reliable synthetic di-and multi-tin precursors for the assembly of oligomeric organotin-oxo compounds in which the shape, dimension and tin nuclearity can be controlled. The reaction of polymeric diorganotin oxides, (R2SnO)m (R = Me, Et, n-Bu, n-Oct, c-Hex, i-Pr, Ph), with saturated aqueous NH4X solutions (X = F, Cl, Br, I, OAc) in refluxing 1,4-dioxane afforded in high yields dimeric tetraorganodistannoxanes, [R2(X)SnOSn(X)R2]2, and in a few cases diorganotin dihalides or diacetates, R2SnX2. This method appears to be particularly good for the synthesis of halogenated tetraorganodistannoxanes but a less suitable method for the preparation of dicarboxylato tetraorganodistannoxanes. Identification of [R2(OH)SnOSn(X)R2]2 (R = n-Bu; X = Cl, Br) and [R2(OH)SnOSn(X)R2][R2(X)SnOSn(X)R2] suggest a serial substitution mechanism starting from [R2(OH)SnOSn(OH)R2]2. A series of α, ω -bis(triphenylstannyl)alkanes, [Ph3Sn]2(CH2)n (n = 3-8, 10, 12) and some of their derivatives were synthesised and characterised. These α, ω-bis(triphenylstannyl)alkanes, [Ph3Sn]2(CH2)n were converted to the corresponding halides [R(Cl)2Sn]2(CH2)n (R = CH2SiMe3) and subsequently to the polymeric oxides {[R(0)Sn]2(CH2)n}m. Reaction of {[R(O)Sn]2(CH2)n}m with [R(Cl)2Sn]2(CH2)n. (n = 3, n' = 4 and n = 4, n' = 3) in toluene at 100°C results in a mixture of symmetric and asymmetric double ladders, where different spacer chain lengths (n and n') provide the source of asymmetry. The coexistence at high temperature of separate 119Sn NMR signals belonging to symmetric and asymmetric double ladders suggests an equilibrium that is slow on the 119Sn NMR time scale and the position of which is temperature dependent. However, 119Sn NMR spectroscopic experiments of {[R(0)Sn]2(CH2)3}m with [R(Cl)2Sn]2(CH2)n for longer spacers (n - 5, 6, 8, 10, 12) reveal that molecular self-assembly of symmetric spacer-bridged di-tin precursors of equal chain length is preferred over asymmetric species. An ether-bridged di-tin tetrachloride [R(Cl)2Sn(CH2)3]2O (R = CH2SiMe3) and its corresponding polymeric oxide {[R(O)Sn(CH2)3]2O}m were synthesised and characterised. Reaction of [R(Cl)2Sn(CH2)3]2O with {[R(O)Sn(CH2)3]2O}m results in a unique functionalised double ladder {{[RSn(Cl)](CH2)3O(CH2)3[RSn(Cl)]}O}4 whose structure in the solid state was determined by X-ray analysis. Identification of tetrameric functionalised double ladder as well as dimeric and monomeric species suggest the existence of an equilibrium in solution. The feasibility of the functionalised double ladder to form host-guest complexes with a variety of metal cations is investigated using electrospray mass spectrometry (ESMS). Evidence for such complexes is found only for sodium cations. The reaction between {[R(O)Sn]2(CH2)n}m (n = 3, 4, 8, 10) and triflic acid is described. The initial formed products [RSn(CH2)nSnR](OTf)4 are easily hydrolysed. For n = 3, self-assembly leads to a discrete double ladder type structure, {{[RSn(OH)](CH2)3[RSn(H2O)]}O}44OTf, which is the first example of a cationic double ladder. For n ≥ 3, hydrolysis gives polymeric products, as demonstrated by the crystal structure of {[(H2O)(OH)RSn]2(CH2)4-2OTf2H2O}m. Two spacer-bridged terra-tin octachlorides [R(Cl)2Sn(CH2)3Sn(Cl)2]2(CH2)n (R = CH2SiMes; n = 1, 8) and their corresponding polymeric oxides {[R(O)Sn(CH2)3Sn(O)]2(CH2)n}m were successfully synthesised and characterised. Attempts were made to synthesise quadruple ladders from these precursors. Reactions of [R(Cl)2Sn(CH2)3Sn(Cl)2]2CH2 with {[R(O)Sn(CH2)3Sn(O)]2CH2}m or (Y-Bu2SnO)3 result in, mostly insoluble, amorphous solids. Reactions of [R(Cl)2Sn(CH2)3Sn(Cl)2]2(CH2)8 with {[R(O)Sn(CH2)3Sn(O)]2(CH2)8}m or (t-Bu2SnO)s result in new tin-containing species which are presumably oligomeric. The synthesis of a series of alkyl-bridged di-tin hexacarboxylates [(RCO2)3Sn]2(CH2)n (n = 3, 4; R = Ph, c-C6H11, CH3, C1CH2) is also reported. The hydrolysis of these compounds is facile and complex. There appears to be no correlation between spacer chain length and hydrolysis product. However, the conjugate acid strength of the carboxylate does appear to be important. In general only insoluble amorphous polymeric organotin-oxo compounds were obtained.

Preparation and characterisation of metallic glassy/amorphous materials

This thesis studied the plastic deformation behaviour of bulk metallic glasses by conducting indentations on various thermal histories using bonded interface technique. Another effort was to probe the route to fabricate bulk amorphous alloy via consolidating amorphous powder.

Comparative study on thermodynamical and electrochemical behavior of Al88Ni6La6 and Al86Ni6La6Cu2 amorphous alloys

Two amorphous ribbons with the compositions of Al₈₈Ni₆La₆ and Al₈₆Ni₆La₆Cu₂ were made using the meltspun method, and their thermal response and electrochemical behavior were studied comparatively. Differential scanning calorimetry (DSC) and electrochemical polarization measurements indicated that Al₈₆Ni₆La₆Cu₂ exhibited slightly higher crystallization temperature (T_x), lower melting point (T₁) and better corrosion resistance in 0.01 mol · L⁻¹ NaCl alkaline solution. These results demonstrated that Cu (2%) addition could slightly promote the glass forming ability, but it could greatly improve the corrosion resistance of Al₈₈Ni₆La₆ alloy in 0.01 mol · L⁻¹ NaCl alkaline solution.

The influence of heat treatment on the corrosion behaviour of as-spun amorphous Al88Ni6La6 alloy in 0.01 M NaCl solution

The effect of the heat treatment on the corrosion behaviour of amorphous Al₈₈Ni₆La₆ made by melt-spun has been investigated by electrochemical measurements. Heat treatment was carried out at 523 K and 673 K for 4 min and 15 min respectively. The evolution of the crystallization process after annealing was identified by differential scanning calorimeter (DSC) as well as X-ray diffraction. The XRD patterns show that the structure of samples heat-treated at higher temperature changes towards a crystal state. The results obtained from the polarization curves reveal that all Al₈₈Ni₆La₆ alloys exhibit spontaneously passivated behaviour. Furthermore, it is noted that the partially crystallized alloy has the best corrosion resistance in comparison with as-spun amorphous and fully crystallized alloys, while the fully crystallized sample shows deterioration in the corrosion resistance.

Effect of crystallization on corrosion resistance of Cu52.5Ti30Zr11.5Ni6 bulk amorphous alloy

The effects of crystallization on the corrosion resistance of a  Cu52.5Ti30Zr11.5Ni6 bulk amorphous alloy in 1 mol/L HCl, and 6 mol/L NaOH solutions were studied. The amorphous alloy was identified by  differential thermal analysis(DSC) and by X-ray diffraction(XRD). The partially and fully crystallized alloys were prepared by controlling the annealing  temperatures at 738 and 873 K for 1 and 12 min, respectively, and the corrosion resistances of those annealed alloys were compared with that of the amorphous alloy by immersion test and potentiodynamic measurements in 1 mol/L HCl and 6 mol/L NaOH solutions. The results show that the  partially crystallized alloy exhibits high corrosion resistance, whereas full crystallization results in deteriorated corrosion resistance compared with that of the as-cast amorphous alloy.

Phase formation and physical properties of mechanically alloyed amorphous 55Mg35Ni1OSi

Amorphous 55Mg35Ni10Si alloy powder has been synthesized by mechanical alloying technique using pure Mg, Ni and Si elemental powders. The transformation of the crystalline powders into an amorphous one has been investigated by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and differential scanning calorimetry. The new material produced has a higher thermal stability than reported results, which is beneficial to the fabrication of Mg–Ni–Si bulk amorphous components through powder metallurgy.

Preparation of Mg55Ni35Si10 amorphous powders by mechanical alloying and consolidation by vacuum hot pressing

Amorphous 55Mg35NilOSi alloy powder has been synthesized by mechanical alloying technique using pure Mg, Ni and Si elemental powders. The transformation of the crystalline powders into an amorphous one has been investigated by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and differential scanning calorimetry. The new material produced has a higher thermal stability than reported results, which is beneficial to the fabrication of Mg-Ni-Si bulk amorphous components through powder metallurgy.

Effects of quenching rate on amorphous structures of Cu46Zr54 metallic glass

Metallic glass shows some superior properties different from crystalline, but the nature of amorphous structure and structural change during glass transition have not been completely understood yet. Molecular dynamics simulation provides intuitive insight into the microstructure and properties at atomistic level. Before probing into the microstructures of metallic glass with molecular dynamics (MD) simulation, it is important to obtain amorphous state first. In the current work, we reproduce the process of manufacturing metallic glass in laboratory including the melting, equilibrating and quenching procedure with molecular dynamics simulations. The structure changing at melting point and glass transition temperature are investigated with the different cooling processing. The partial radial distribution function (PRDF) is applied as a criterion to judge the final amorphous state obtained considering the quenching at different cooling rates and the effects of cooling rate on the formation of amorphous structures are further discussed.

Photodarkening of amorphous selenium under high pressure

The photodarkening phenomena of amorphous Se have been studied by the optical absorption coefficient, sound velocity and attenuation measurements. The light illumination at low temperatures induces the photodarkening, and the photodarkened state is completely recovered by annealing near 306 K corresponding to the glass transition temperature. The photodarkening is enhanced by application of pressure. The sound velocity decreases and the sound attenuation increases by the illumination at low temperature. These suggest that a structural disorder increases in the photodarkened state. Three stages are observed for the recovery process of the photodarkened specimen. The photodarkening and the recovery process are discussed on the basis of VAP (valence alternative pair) model.

Effects of quenching rate on amorphous structures of Cu46Zr54 metallic glass

Metallic glass shows some superior properties different from crystalline, but the nature of amorphous structure and structural change during glass transition have not been completely understood yet. Molecular dynamics simulation provides intuitive insight into the microstructure and properties at atomistic level. Before probing into the microstructures of metallic glass with molecular dynamics (MD) simulation, it is important to obtain amorphous state first. In the current work, we reproduce the process of manufacturing metallic glass in laboratory including the melting, equilibrating and quenching procedure with molecular dynamics simulations. The structure changing at melting point and glass transition temperature are investigated with the different cooling processing. The partial radial distribution function (PRDF) is applied as a criterion to judge the final amorphous state obtained considering the quenching at different cooling rates and the effects of cooling rate on the formation of amorphous structures are further discussed.

A study on the thermodynamics of in situ MgAl2O4/Al MMC formation using amorphous silica sources

MgAl₂O₄ (spinel) is considered as a commercially important ceramic reinforcement in MMC fabrication because of the possible tailorable properties imparted with Al for many applications. Generally, any oxygen source, i.e., the dissolved oxygen, or pure oxygen atmosphere or atmospheric oxygen is sufficient for the formation of MgAl₂O₄ in Al–Mg alloy. Among all the reactive oxygen sources, the reactivity of SiO₂ with Al alloy is found to be higher. Amorphous silica is highly reactive in nature compared to crystalline silica. The present study has examined the thermodynamics of MgAl₂O₄ formation in Al–Mg alloy by amorphous silica sources with the aid of differential thermal analyzer (DTA) and the simulated experiments. The dissolution of Si and the formation of MgAl₂O₄ are detected as the endothermic peak and the immediate exothermic peak respectively in DTA curves and the presence of MgAl₂O₄ is confirmed by the XRD of the simulated sample. The MgO formed due to the oxidation of Mg in Al–Mg alloy has been found to influence the MgAl₂O₄ formation.

Conductivity in amorphous polyether nanocomposite materials

Using a completely amorphous polyether we have investigated the effect of the inclusion of a nano-particulate filler on a polymer electrolyte. Nano-sized TiO₂ is shown not to significantly affect the conductivity of composite electrolytes containing 1.0 or 1.25 mol/kg LiClO₄ or 1.5 or 2.0 mol/kg LiTFSI. At 1.5 mol/kg LiClO₄ a significant increase in conductivity is observed. Raman spectroscopy experiments have been used to investigate the effect of filler on ion-aggregation. Only one new vibrational mode can be assigned to the composite which is not due to the polymer electrolyte or the filler. From this work, we believe the increased conductivity observed by previous researchers as a result of filler addition may be largely attributed to the effect on the degree of crystallinity along with some disruption of ion-aggregation by the fillers in PEO based electrolytes.

Solid state ion transport and phase behaviour in composites of N,N-methyl propylpyrrolidinium tetrafluoroborate and amorphous polyethylene oxide

The binary and ternary addition of 2 wt.% LiBF₄ and 2 wt.% amorphous polyethylene oxide (aPEO) respectively to the plastic crystal forming salt P₁₃BF₄ (where P₁₃⁺=methylpropyl pyrrolidinium cation) was investigated with specific focus on the phase behaviour and evaluation of transport characteristics. Differential scanning calorimetry (DSC), optical thermomicroscopy, solid state nuclear magnetic resonance (NMR), and AC impedance spectroscopy were used to develop an understanding of the conduction process in the pure and mixed systems. The morphology of the ternary compound appeared as hexagonal spherulites upon solidification. Multinuclear NMR Pulsed Field Gradient measurements (¹H,¹⁹F,⁷Li) to probe both cation and anion diffusion coefficients are reported. The anion is shown to be the most diffusive (at 320 K:¹⁹F=2.5×10⁻¹¹ m² s⁻¹; 1H: 1.8×10⁻¹¹ m² s⁻¹; ⁷Li: 1.1×10⁻¹¹ m² s⁻¹) in the ternary compound, with enhanced conductivity (2.7×10⁻⁵ S cm⁻¹ at 310 K) just below the melt.