Parametric investigation and measurement of near end and far end crosstalk in multiconductor microstrip transmission lines

This paper investigates and measures the near end and far end crosstalk in the multiconductor transmission line (MTL) mounted on the PCB by varying the parameters which are associated with physical dimension, characteristic of the substrate and the nature of input signal. With the variation of these factors, the coupling inductance and capacitance vary causing crosstalk. By using the method of moment (MoM), the per unit length parameters are calculated for microstrip lines. Subcircuit model is used to investigate the time domain and frequency domain analysis of near field and far field crosstalk. This parametric investigation is very useful for designing high speed interconnectors on PCB substrates. Some experimental results are presented to validate the analytical findings.

Nonlinear dynamic modeling of ionic polymer conductive network composite actuators using rigid finite element method

Ionic polymer conductive network composite (IPCNC) actuators are a class of electroactive polymer composites that exhibit some interesting electromechanical characteristics such as low voltage actuation, large displacements, and benefit from low density and elastic modulus. Thus, these emerging materials have potential applications in biomimetic and biomedical devices. Whereas significant efforts have been directed toward the development of IPMC actuators, the establishment of a proper mathematical model that could effectively predict the actuators' dynamic behavior is still a key challenge. This paper presents development of an effective modeling strategy for dynamic analysis of IPCNC actuators undergoing large bending deformations. The proposed model is composed of two parts, namely electrical and mechanical dynamic models. The electrical model describes the actuator as a resistive-capacitive (RC) transmission line, whereas the mechanical model describes the actuator as a system of rigid links connected by spring-damping elements. The proposed modeling approach is validated by experimental data, and the results are discussed. © 2014 Elsevier B.V. All rights reserved.

Electromagnetic receiving properties of overhead power line

This paper examines the use of overhead power transmission lines as electromagnetic sensors for detecting electric discharges caused by defective power transmission equipment. The experimental study involved the use of a spark gap (point-point configuration) and two HV conductors of different lengths to simulate electric discharge that takes place on transmission line. The experimental results show that large amount of energy are coupled onto the conductors and the amount of electromagnetic energy is dependent on the length of the conductor and the distance between the source and the conductor.

Applying inverse just-noticeable-differences of velocity to position data for haptic data reduction

ust-Noticeable-Differences (JND) as a dead-band in perceptual analysis has been widely used for more than a decade. This technique has been employed for data reduction in hap tic data transmission systems by several researchers. In fact, researchers use two different JND coefficients that are JNDV and JNDF for velocity and force data respectively. For position data, they usually rely on the resolution of hap tic display device to omit data that are unperceivable to human. In this paper, pruning undesirable position data that are produced by the vibration of the device or subject and/or noise in transmission line is addressed. It is shown that using inverse JNDV for position data can prune undesirable position data. Comparison of the results of the proposed method in this paper with several well known filters and some available methods proposed by other researchers is performed. It is shown that combination of JNDV could provide lower error with desirable curve smoothness, and as little as possible computation effort and complexity. It also has been shown that this method reduces much more data rather than using forward-JNDV.

Direct current electric potential in an anisotropic half-space with vertical contact containing a conductive 3D body

Detailed studies of anomalous conductors in otherwise homogeneous media have been modelled. Vertical contacts form common geometries in galvanic studies when describing geological formations with different electrical conductivities on either side. However, previous studies of vertical discontinuities have been mainly concerned with isotropic environments. In this paper, we deal with the effect on the electric potentials, such as mise-`a-la-masse anomalies, due to a conductor near a vertical contact between two anisotropic regions. We also demonstrate the interactive effects when the conductive body is placed across the vertical contact. This problem is normally very difficult to solve by the traditional numerical methods. The integral equations for the electric potential in anisotropic half-spaces are established. Green’s function is obtained using the reflection and transmission image method in which five images are needed to fit the boundary conditions on the vertical interface and the air-earth surface. The effects of the anisotropy of the environments and the conductive body on the electric potential are illustrated with the aid of several numerical examples.

Pi-shaped MEMS architecture for lowering actuation voltage of RF switching

A wide band low actuation capacitive coupling electrostatic RF MEMS switching device is presented in this paper. The device includes a pi-shaped matching architecture containing two switches connected by a high impedance short transmission line. The device can act as a switch for any desired frequency whilst requiring only 12volts for actuation. By optimizing the length and the characteristic impedance of the transmission line, the switch can be tailored for desired frequency bands. The switch is calculated and simulated for Ka to V frequency bands demonstrating excellent improvements of RF characteristics.

Design and simulation of a tunable MEMS filter for wireless biomedical signal transceivers

This paper presents a new architecture for a high quality tunable MEMS filter that can be used in wireless biomedical signal transceivers. It consists of a π match circuit with two shunt capacitive coupling switches separated by a piece of high impedance short transmission line, and also a series switch placed at the quarter wavelength distance away from the π match circuit. The low actuation voltage and also tunability are important features of the design objective. All portions of the filter can be realized simultaneously. Thus, the filter docs not require any extra steps during its fabrication, and is not costly. The simulation results confirm the good performance of the filter.

RF techniques for lowering the actuation voltage of RF MEMS shunt capacitor switch for C-K band

Increasing the capacitance ratio in RF MEMS shunt capacitive switch will increase its RF performance but also raise its actuation voltage. To improve the RF performance of the switch without increasing its capacitance ratio, this paper explores two methods: reducing the LC resonance from the mm-wave into the X-band by using an inductive bridge, and using two short high impedance transmission lines at both ends of the CPW line. Accordingly, this paper presents the design and simulation of an electro-static low actuation voltage and a very high isolation multipurpose switch with a very large bandwidth. The simulation results are presented and discussed.

An in situ method for the study of strain broadening using synchrotron X-ray diffraction

A tensonometer for stretching metal foils has been constructed for the study of strain broadening in X-ray diffraction line profiles. This device, which is designed for use on powder diffractometers and was tested on Station 2.3 at Daresbury Laboratory, allows in situ measurements to be performed on samples under stress. It can be used for data collection in either transmission or reflection modes using either symmetric or asymmetric diffraction geometries. As a test case, measurements were carried out on an 18 µm-thick copper foil experiencing strain levels of up to 5% using both symmetric reflection and symmetric transmission diffraction. All the diffraction profiles displayed peak broadening and asymmetry which increased with strain. The measured profiles were analysed by the fundamental-parameters approach using the TOPAS peak-fitting software. All the observed broadened profiles were modelled by convoluting a refineable diffraction profile, representing the dislocation and crystallite size broadening, with a fixed instrumental profile predetermined using high-quality LaB6 reference powder. The deconvolution process yielded `pure' sample integral breadths and asymmetry results which displayed a strong dependence on applied strain and increased almost linearly with applied strain. Assuming crystallite size broadening in combination with dislocation broadening arising from f.c.c. a/2〈110〉{111} dislocations, the variation of mechanical property with strain has been extracted. The observation of both peak asymmetry and broadening has been interpreted as a manifestation of a cellular structure with cell walls and cell interiors possessing high and low dislocation densities.

The adjustment of children of Australian Vietnam veterans: is there evidence for the transgenerational transmission of the effects of war-related trauma?

Objective: The presence of posttraumatic stress disorder (PTSD) in trauma survivors has been linked with family dysfunction and symptoms in their children, including lower self-esteem, higher disorder rates and symptoms resembling those of the traumatized parent. This study aims to examine the phenomenon of intergenerational transfer of PTSD in an Australian context.

Method: 50 children (aged 16–30) of 50 male Vietnam veterans, subgrouped according to their fathers' PTSD status, were compared with an age-matched group of 33 civilian peers. Participants completed questionnaires with measures of self-esteem, PTSD symptomatology and family functioning.

Results: Contrary to expectations, no significant differences were found between the self-esteem and PTSD symptomatology scores for any offspring groups. Unhealthy family functioning is the area in which the effect of the veteran's PTSD appears to manifest itself, particularly the inability of the family both to experience appropriate emotional responses and to solve problems effectively within and outside the family unit.

Conclusion: Methodological refinements and further focus on the role of wives/mothers in buffering the impact of veterans' PTSD symptomatology on their children are indicated. Further effort to support families of Veterans with PTSD is also indicated.

Security authentication for on-line internet banking

The advent of Internet Banking has shown the importance of effective method of authenticating a users in a remote environment. There are many different countenances to contemplate when examining Internet based security. One of the most tried and trusted techniques of protecting the safety of systems and data is to control people's access. The foundation for such measures is authentication. Specifically for Internet banking there is a real need for a way to uniquely identify and authenticate users without the possibility of their authenticity being cloned. This paper proposes a framework concerning how to identify security requirements for Internet Banking.

A video-based real-time vehicle detection method by classified background learning

A new two-level real-time vehicle detection method is proposed in order to meet the robustness and efficiency requirements of real world applications. At the high level, pixels of the background image are classified into three categories according to the characteristics of Red, Green, Blue (RGB) curves. The robustness of the classification is further enhanced by using
line detection and pattern connectivity. At the lower level, an exponential forgetting algorithm with adaptive parameters for different categories is utilised to calculate the background and reduce the distortion by the small motion of video cameras. Scene tests show that the proposed method is more robust and faster than previous methods, which is very suitable for real-time vehicle detection in outdoor environments, especially concerning locations where the level of illumination changes frequently and speed detection is important.