Simulation of three-point bending test of titanium foam for biomedical applications

Using Titanium (Ti) foam as an implant material is a new approach for biomedical applications and it is important to understand the mechanical behaviors of this new foam material. In the present study, the bending of the Ti foam has been simulated and compared against recently published data [1]. FE Analysis has been performed by Abaqus software. Stiffness and Yield strength of foams between 50% (cortical bone) to 80% (cancellous bone) porosity range were considered. This study showed that crushable foam material model in Abaqus, which has developed primarily for Aluminum (Al) foam alloys, is also valid for Ti Foam before any crack or damage occurs in the sample.

Evaluation of three remote camera systems for detecting mammals and birds

Automated camera systems have widespread application in wildlife studies and their use is increasing (Kucera & Barrett 1993; Cutler & Swann 1999; Swann et al. 2004; Parker et al. 2008). Among other applications, they have been used to produce species inventories, estimate population sizes, study behaviour and examine the impact and activity of predators (Cutler & Swann 1999; Swann et al. 2004). Modern camera systems can operate for extended durations, are relatively non-invasive, easy to operate, portable, durable and can take good-quality images by day and night (Kucera & Barrett 1993; Peterson & Thomas 1998; Allison & Destefano 2006; Parker et al. 2008). Beyond their scientific applications, the generation of high-quality images can be useful for educational and conservation purposes (Cutler & Swann 1999). The two most common types of systems currently used in ecological research are passive and active infrared (IR) systems (Cutler & Swann 1999; Parker et al. 2008). An older form of remote photography is video which captures a continuous record of activity at a focal site (Stewart et al.1997; King et al. 2001). Camera systems have certain limitations and biases (Swann et al. 2004), yet these have not been well studied. Refinement of the use of camera systems is required to fully realize their value (Towerton et al. 2008). Here, we describe a comparison of detection rates of mammals and birds by passive and active IR camera systems, using a video system to benchmark detection rates.

Performance of wrought aluminium and magnesium alloy tubes in three-point bending

This present work examines the load carrying capacity, energy absorption and fracture characteristics of wrought magnesium and aluminium alloy tubes in three-point bending. Magnesium alloy AZ31, and aluminium alloys 6063 and 7075, were extruded into cylindrical tubes of both equivalent thickness and mass. A strong thickness effect was present meaning that the AZ31 tube had significantly higher load and energy absorption performance than an equivalent mass 6063 tube, albeit not as high as the 7075 tube. Hinge formation and maximum load was delayed for the magnesium alloy, meaning that a high energy absorption rate persisted to higher deformation displacements than the aluminium alloys. It was also found that fracture during deformation was dependent on the indenter diameter, tube thickness and lower support separation.

Effect of grain size on the performance of extruded magnesium alloy tubes in three-point bending

The performance of extruded AZ31, AZ61 and AM-EX1 tubes was examined in three-point bending. Different extrusion temperatures were used to investigate the effect of grain size on the load-carrying capacity, energy absorption and fracture propensity of the tubes. Results showed that while the peak load increased with a smaller average recrystallised grain size, the retention of large elongated un-recrystallised grains in the microstructure reduced the load. The presence of the large elongated grains also appeared detrimental to the ability of the tube to deform before fracture.

Quality as the criterion for delivered information systems effectiveness

One of the major challenges of MIS activities is the difficulty in measuring the effectiveness of delivered systems. The principal purpose of my research is to explore this field in order to develop an instrument by which to measure such effectiveness. Conceptualisation of Information System (IS) Effectiveness has been substantially framed by DeLone and McLean's (1992) Success; Model. But with the innovation in Information Technology (IT) over the past decade, and the constant pressure in IT to improve performance, there is merit in undertaking a fresh appraisal of the issue. This study built on the model of IS Success developed by DeLone and MeLean, but was broadened to include related research from the domains of IS, Management and Marketing. This analysis found that an effective IS function is built on three pillars: the systems implemented; the information held and delivered by these systems; and, the service provided in support of the IS function. A common foundation for these pillars is the concept of stakeholder needs. In seeking to appreciate the effectiveness: of delivered IS applications in relation to the job performance of stakeholders, this research developed an understanding of what quality means in an IT context I argue that quality is a more useful criterion for effectiveness than the more customary measures of use and user satisfaction. Respecification of the IS Success Model was then proposed. The second phase of the research was to test this model empirically through judgment panels, focus groups and interviews. Results consistently supported the structure and components of the respecified model. Quality was determined as a multi-dimensional construct, with the key dimensions for the quality of delivered IS differing from those used in the research from other disciplines. Empirical work indicated that end-user stakeholders derived their evaluations of quality by internally evaluating perceived performance of delivered IS in relation to their expectations for such performance. A short trial explored whether, when overt measurement of expectations was concurrent with the measurement of perceptions, a more revealing appraisal of delivered IS quality was provided than when perceptions alone were measured. Results revealed a difference between the two measures. Using the New IS Success Model as the foundation, and drawing upon the related theoretical and empirical research, an instrument was developed to measure the quality/effectiveness of delivered IS applications. Four trials of this instrument, QUALIT, are documented. Analysis of results from preliminary trials indicates promise in terms of business value: the instrument is simple to administer and has the capacity to pinpoint areas of weakness. The research related to the respecification of the New IS Success Model and the associated empirical studies, including the development of QTJALIT, have both contributed to the development of theory about IS Effectiveness. More precisely, my research has reviewed the components of an information system, the dimensions comprising these components and the indicators of each, and based upon these findings, formulated an instrument by which to measure the effectiveness of a delivered IS.

Skin temperature as a noninvasive marker of haemodynamic and perfusion status in adult cardiac surgical patients : an observational study

Objective
Foot temperature has long been advocated as a reliable noninvasive measure of cardiac output despite equivocal evidence. The aim of this pilot study was to investigate the relationship between noninvasively measured skin temperature and the more invasive core-peripheral temperature gradients (CPTGs), against cardiac output, systemic vascular resistance, serum lactate, and base deficit.

Research methodology
The study was of a prospective, observational and correlational design. Seventy-six measurements were recorded on 10 adults postcardiac surgery. Haemodynamic assessments were made via bolus thermodilution. Skin temperature was measured objectively via adhesive probes, and subjectively using a three-point scale.

Setting
The study was conducted within a tertiary level intensive care unit.

Results
Cardiac output was a significant predictor for objectively measured skin temperature and CPTG (p = .001 and p = .004, respectively). Subjective assessment of skin temperature was significantly related to cardiac output, systemic vascular resistance, and serum lactate (p < .001, respectively).

Conclusions
These results support the utilisation of skin temperature as a noninvasive marker of cardiac output and perfusion. The use of CPTG was shown to be unnecessary, given the parallels in results with the less invasive skin temperature parameters. A larger study is however required to validate these findings.

Camera traps : the research paparazzi

The use of cameras to monitor wildlife is commonplace; however, little is known of the effectiveness of different camera technologies for the detection of mammals. We compared the detection success of three different camera systems, a passive infrared (IR) system, an active IR and a constant video camera, alongside a trapping grid of Elliott and cage traps to determine their effectiveness at detecting mammals at multiple locations in the Otways National Park, Victoria, Australia (n = 160 events; 40 ± 23 [SD] events per night). Species detected and detection rates differed between methods (χ2 = 57.95, df = 2, p < 0.0001). Only house mice (Mus musculus) were detected by camera and traditional trapping techniques. Camera systems alone detected foxes (Vulpes vulpes) and a koala (Phascolarctos cinereus), while traditional traps captured bush rats (Rattus fuscipes), agile antechinus (Antechinus agilis) and a brush-tailed possum (Trichosurus vulpecula) which were not detected by the camera systems. Assuming that the video camera detected all mammals at the camera trap, the passive IR system detected almost all mammals detected by the video and it detected significantly more species than the active IR system. The choice of method will ultimately depend on the species of interest, logistics and the study site, and may substantially influence the results of a study.

Age does not influence the bone response to treadmill exercise in female rats

Purpose: Because it is believed that bone may respond to exercise differently at different ages, we compared bone responses in immature and mature rats after 12 wk of treadmill running.

Methods: Twenty-two immature (5-wk-old) and 21 mature (17-wk-old) female Sprague Dawley rats were randomized into a running (trained, N = 10 immature, 9 mature) or a control group (controls, N = 12 immature, 12 mature) before sacrifice 12 wk later. Rats ran on a treadmill five times per week for 60-70 min at speeds up to 26 m[middle dot]min-1. Both at baseline and after intervention, we measured total body, lumbar spine, and proximal femoral bone mineral, as well as total body soft tissue composition using dual-energy x-ray absorptiometry (DXA) in vivo. After sacrificing the animals, we measured dynamic and static histomorphometry and three-point bending strength of the tibia.

Results: Running training was associated with greater differences in tibial subperiosteal area, cortical cross-sectional area, peak load, stiffness, and moment of inertia in immature and mature rats (P < 0.05). The trained rats had greater periosteal bone formation rates (P < 0.01) than controls, but there was no difference in tibial trabecular bone histomorphometry. Similar running-related gains were seen in DXA lumbar spine area (P = 0.04) and bone mineral content (BMC;P = 0.03) at both ages. For total body bone area and BMC, the immature trained group increased significantly compared with controls (P < 0.05), whereas the mature trained group gained less than did controls (P < 0.01).

Conclusion: In this in vivo model, where a similar physical training program was performed by immature and mature female rats, we demonstrated that both age groups were sensitive to loading and that bone strength gains appeared to result more from changes in bone geometry than from improved material properties.

Computational aspects of the numerical solution of SDEs

In the last 30 to 40 years, many researchers have combined to build the knowledge base of theory and solution techniques that can be applied to the case of differential equations which include the effects of noise. This class of ``noisy'' differential equations is now known as stochastic differential equations (SDEs). Markov diffusion processes are included within the field of SDEs through the drift and diffusion components of the Itô form of an SDE. When these drift and diffusion components are moderately smooth functions, then the processes' transition probability densities satisfy the Fokker-Planck-Kolmogorov (FPK) equation -- an ordinary partial differential equation (PDE). Thus there is a mathematical inter-relationship that allows solutions of SDEs to be determined from the solution of a noise free differential equation which has been extensively studied since the 1920s. The main numerical solution technique employed to solve the FPK equation is the classical Finite Element Method (FEM). The FEM is of particular importance to engineers when used to solve FPK systems that describe noisy oscillators. The FEM is a powerful tool but is limited in that it is cumbersome when applied to multidimensional systems and can lead to large and complex matrix systems with their inherent solution and storage problems. I show in this thesis that the stochastic Taylor series (TS) based time discretisation approach to the solution of SDEs is an efficient and accurate technique that provides transition and steady state solutions to the associated FPK equation. The TS approach to the solution of SDEs has certain advantages over the classical techniques. These advantages include their ability to effectively tackle stiff systems, their simplicity of derivation and their ease of implementation and re-use. Unlike the FEM approach, which is difficult to apply in even only two dimensions, the simplicity of the TS approach is independant of the dimension of the system under investigation. Their main disadvantage, that of requiring a large number of simulations and the associated CPU requirements, is countered by their underlying structure which makes them perfectly suited for use on the now prevalent parallel or distributed processing systems. In summary, l will compare the TS solution of SDEs to the solution of the associated FPK equations using the classical FEM technique. One, two and three dimensional FPK systems that describe noisy oscillators have been chosen for the analysis. As higher dimensional FPK systems are rarely mentioned in the literature, the TS approach will be extended to essentially infinite dimensional systems through the solution of stochastic PDEs. In making these comparisons, the advantages of modern computing tools such as computer algebra systems and simulation software, when used as an adjunct to the solution of SDEs or their associated FPK equations, are demonstrated.

Experimental and numerical analysis of the deformed process of cracks/cavities

In this paper, the three-point bending tests of beams with a small single-edge crack are conducted to demonstrate the reliability and accuracy of the laser diffraction technique in detecting its deformation and evolution. As a comparison, the quasi-static analysis of the beam subjected to 3-point bending is further proceeded using the finite element method and the related results have been in good agreement with those from the tests.

Protecting web services from distributed denial of service attacks

The outcome of the research was the development of three network defence systems to protect corporate network infrastructure. The results showed that these defences were able to detect and filter around 94% of the DDoS attack traffic within a matter of seconds.

A multi-vector, multi-envelope HIV-1 vaccine

The St. Jude Children's Research Hospital (St. Jude) HIV-1 vaccine program is based on the observation that multiple, antigenically distinct HIV-1 envelope protein structures are capable of mediating HIV-1 infection. A cocktail vaccine comprising representatives of these diverse structures (immunotypes) is therefore considered necessary to elicit lymphocyte populations that prevent HIV-1 infection. This strategy is reminiscent of that used to design a currently licensed and successful 23-valent pneumococcus vaccine. Three recombinant vector systems are used for the delivery of envelope cocktails (DNA, vaccinia virus, and purified protein) and each of these has been tested individually in phase I safety trials. A fourth clinical trial, in which diverse envelopes and vectors are combined in a prime-boost vaccination regimen, has been FDA-approved and is expected to commence in 2007. This trial will continue to test the hypothesis that a multivector, multi-envelope vaccine can elicit diverse 8- and T-cell populations that can prevent HIV-1 infections in humans.

Climate change impacts and adaptation in Bangladesh : an agent-based approach

Bangladesh exemplifies the complex challenges facing densely populated coastal regions. The
pressures on the country are immense: around 145 million people live within an area of just 145,000 sq-km at
the confluence of three major river systems: the Ganges, the Brahmaputra and the Meghna. While progress
has been made, poverty remains widespread, with around 39% of children under five malnourished. Most of
its land-mass lies below 10m above sea level with considerable areas at sea level, leading to frequent and
prolonged flooding during the monsoons. Sea level rise is leading to more flooding as storm surges rise off
higher sea levels, pushing further inland. Higher sea levels also result in salt-water intrusion into freshwater
coastal aquifers and estuaries, contaminating drinking water and farmland. Warmer ocean waters are also
expected to lead to an increase in the intensity of tropical storms.
Bangladesh depends on the South Asian summer monsoon for most of its rainfall which is expected to
increase, leading to more flooding. Climate scientists are also concerned about the stability of monsoon and
the potential for it to undergo a nonlinear phase shift to a drier regime. Bangladesh faces an additional
hydrological challenge in that the Ganges and Brahmaputra rivers both rise in the Himalaya-Tibetan Plateau
region, where glaciers are melting rapidly. The Intergovernmental Panel on Climate Change (IPCC)
concluded that rapid melting is expected to increase river flows until around the late-2030s, by which time
the glaciers are expected to have shrunk from their 1995 extent of 500,000 sq-km to an expected 100,000 sqkm.
After the 2030s, river flows could drop dramatically, turning the great glacier-fed rivers of Asia into
seasonal monsoon-fed rivers. The IPCC concluded that as a result, water shortages in Asia could affect more
than a billion people by the 2050s. Over the same period, crop yields are expected to decline by up to 30% in
South Asia due to a combination of drought and crop heat stress. Bangladesh is therefore likely to face
substantial challenges in the coming decades.
In order to adequately understand the complex, dynamic, spatial and nonlinear challenges facing Bangladesh,
an integrated model of the system is required. An agent-based model (ABM) permits the dynamic
interactions of the economic, social, political, geographic, environmental and epidemiological dimensions of
climate change impacts and adaptation policies to be integrated via a modular approach. Integrating these
dimensions, including nonlinear threshold events such as mass migrations, or the outbreak of conflicts or
epidemics, is possible to a far greater degree with an ABM than with most other approaches.
We are developing a prototype ABM, implemented in Netlogo, to examine the dynamic impacts on poverty,
migration, mortality and conflict from climate change in Bangladesh from 2001 to 2100. The model employs
GIS and sub-district level census and economic data and a coarse-graining methodology to allow model
statistics to be generated on a national scale from local dynamic interactions. This approach allows a more
realistic treatment of distributed spatial events and heterogeneity across the country. The aim is not to
generate precise predictions of Bangladesh’s evolution, but to develop a framework that can be used for
integrated scenario exploration. This paper represents an initial report on progress on this project. So far the
prototype model has demonstrated the desirability and feasibility of integrating the different dimensions of
the complex adaptive system and, once completed, is intended to be used as the basis for a more detailed
policy-oriented model.

Local energy and pre-envelope

We observe that the local energy is the pre-envelope for analytic function. The maxima and phase of this function can be used to compute and classify visual features such as motion and stereo disparity, texture, etc. We examine the construction of new filters for computing Local Energy, and compare these filters with the Gabor filters and the three-point-filter of Venkatesh and Owens.

Local energy, the pre-envelope, and filter resolution

We examine the construction of new filters for computing local energy, and compare these filters with the Gabor filters and the three-point-filter of Venkatesh [l]. Further, we demonstrate that the effect of convolution with complex Gabor filters is to band-pass (with some differentiating effect) and compute the local energy of the result. The magnitude of the resulting local energy is then used to detect features [2], [3] (step features, texture etc.), and the phase is used to classify the detected features [l], [4] or provide disparity information for stereo [5] and motion work [6], [7]. Each of these types of information can be obtained at multiple resolutions, enabling the use of course to fine strategies for computing disparity, and allowing the discrimination of image textures on the basis of which parts of the Fourier domain they dominate [8], [9].