Stereocomplexation and monolayer morphologies of a stereoregular poly(methylmethacrylate) mixture formed at the air/water surface

The stereocomplexation of stereoregular PMMA at the air/water interface was proved by structure determination using reflection-absorption IR and grazing incidence X-ray diffraction. Morphological studies on LB films of i- and s-PMMA blends with different ratios help to disclose the stereocomplexation process of stereoregular PMMA at the air/water interface. It was found that the stereocomplexes exist in particle aggregates randomly dispersed at the air/water interface. In the systems with the i:s ratio deviated from 1:2, the molecules, either i-PMMA or s-PMMA, that do not participate in the stereocomplexation build separate layer surrounding the stereocomplexes. This layer is much thinner than the particle aggregates of the stereocomplexes. If the i-PMMA molecules are rich in this thinner layer, crystallization of i-PMMA takes place, which generates lamellar structure besides the stereocomplexes.

The application of self-assembly monolayer technique into fabricating multilayer nanofilm

Self-Assembly Monolayer (SAM) technique, as a novel and developing technique for fabricating layer-by-layer nanofilm on substrates of various sizes, shapes and materials, has received more and more attention in the areas of light-emitting devices, nonlinear optical materials, conductive films, permselective gas membranes, sensors, modification of electrodes, resistance and printing technique. In comparison with other traditional methods, SAM technique has many significant advantages, including simple process, universality, formation with densely packed, well defined, highly ordered surfaces. This paper will give a review on the recent development in SAM technique.

Electrostatic complex of didodecyldimethylammonium and DNA: Langmuir monolayer, Langmuir–Blodgett film and dye recognition at air/water interface

DNA–didodecyldimethylammonium (DNA–DDDA) electrostatic complex was prepared and characterized through Fourier transformation infrared (FT-IR), 1H NMR and circular dichroism (CD) spectroscopy. When the dye molecule aqueous solutions were used as the subphase, the interaction between three dye molecules, acridine orange (AO), ethidium bromide (EB) and 5,10,15,20-tetrakis(4-N-methylpyridyl)porphine tetra(p-toluenesulfonate) (TMPyP) and the complex at air/solution interface were investigated through the surface pressure–area (π–A) isotherms, Brewster angle microscopy and UV-Vis spectroscopy, respectively. Our investigation indicates that the interaction capabilities of the three dyes to DNA–DDDA complex are different and present an order of TMPyP>AO>EB. For the interaction forms, we believe that TMPyP intercalates into the double helix of DNA, and AO adsorbs onto the surface of the DNA. As for EB, the measured signal is too weak to give a definite interaction form in the present experiment.

Monolayer behavior of a pyridyl head-group-containing amphiphile and its miscibility with poly(D,L-lactide-co-glycolide) on different pH subphase

In this paper, we investigated the Langmuir film and Langmuir–Blodgett (LB) monolayer film of a nonionic amphiphilic molecule, 4-(6-p-pyridyloxyl)hexyloxyl-4′-dodecyloxylazobenzene (C12AzoC6Py) and its mixture with poly(d,l-lactide-co-glycolide) (PLG) at different subphase pH values (2.0, 2.6, 3.3, 4.4, and 6.5, respectively) by surface pressure–area (π–A) isotherms, in situ interface Brewster angle microscopy (BAM), and ex situ atomic force microscopy (AFM). For pure C12AzoC6Py, its π–A isotherms display a plateau when the subphase pH value is lower than 3.0. The pressure of the plateau increases with the decrease of pH until 2.0. Over the plateau, the π–A isotherms become almost identical to the one under neutral conditions. The appearance of such a plateau can be explained as the coexistence of protonation and unprotonation of pyridyl head groups of the employed amphiphile. In contrast to the homogeneous surface morphology of pure C12AzoC6Py near the plateau by BAM observation, the surface in the case of its mixing with PLG exhibits a dendritic crystalline state under low surface pressure at subphase pH lower than 3.0. The crystalline state becomes soft and gradually melts into homogeneous aggregates with surface pressure increasing to a higher value than that of the plateau. Meanwhile, the hydrolysis of PLG in the mixture system at the interface has been affirmed to be restrained to a very large extent. And the PLG was believed to be compelled to the up layer of the LB film due to the phase separation, which is examined by AFM. Based on the experimental results, the corresponding discussion was also performed.

Analysis of self-assembled monolayer interfaces by electrospray mass spectrometry : a gentle approach

A general mass spectrometry technique for the characterization of alkanethiol-modified surfaces is presented. Alkanethiol self-assembled onto a gold surface (in this case, peptides were attached to the gold surface via a thiolate bond) was reductively desorbed in 0.05 M KOH in the presence of octadecyl-derivatized silica gel. The peptide adsorbed onto the silica gel, whereupon it could be filtered, washed to remove any salts, and then eluted using a mixture of 4:1 v/v methanol/water. The eluant containing the peptide was injected into a Fourier transform ion-cyclotron resonance mass spectrometer (FTICR/MS) via electrospray ionization. The spectrum showed no fragmentation of the peptide, demonstrating the gentleness of the technique. This simple procedure is not limited to FTICR/MS and could be adapted to other mass spectrometers.

The self-assembled monolayer modification of electrodes - some recent advances in biological application

The modification of an electrode surface at the molecular level using the technique of depositing self-assembled monolayers (SAM) is a typical example of the techniques used in nanotechnology, from the process "bottom up", which is to create a nanostructure by successive additions of molecular or atomic entities on a surface. This article presents some recent advances in the field, with examples: the development of systems Sat hybridized with biomolecules, nanoparticles or nanotubes in bioelectronics, the use of switchable electrodes to study the adhesion and migration of biological cells , and the integration of molecular son in the SAM to recognize and allow the transduction of a biological response allowing the practice of electrochemistry in a complex biological environment.

Contact electrification induced by monolayer modification of a surface and relation to acid-base interactions

Electrical charge separation following contact between two materials (contact electrification or the triboelectric effect) is well known to occur between different materials as a consequence of their different electronic structures. Here we show that the phenomenon occurs between two surfaces of the same material if one is coated with a single chemisorbed monolayer. We use the surface force apparatus to study contact electrification and adhesion between two silica surfaces, one coated with an amino-silane. The presence of this monolayer results in significantly enhanced adhesion between the surfaces, owing to electrostatic attraction following contact electrification, in accord with Derjaguin's electrostatic theory of adhesion. At the same time, the observed increase in adhesion is consistent with Fowkes' acid-base model (in which acid-base interactions between surface groups are considered to be the predominant factor determining adhesion), as the monolayer converts the originally acidic silica surface to a basic (amine-terminated) one. These observations demonstrate a link between acid- base interactions and contact electrification.

Electrical charge separation following contact between two materials (contact electrification or the triboelectric effect) is well known to occur between different materials as a consequence of their different electronic structures. Here we show that the phenomenon occurs between two surfaces of the same material if one is coated with a single chemisorbed monolayer. We use the surface force apparatus to study contact electrification and adhesion between two silica surfaces, one coated with an amino-silane. The presence of this monolayer results in significantly enhanced adhesion between the surfaces, owing to electrostatic attraction following contact electrification, in accord with Derjaguin's electrostatic theory of adhesion. At the same time, the observed increase in adhesion is consistent with Fowkes' acid-base model (in which acid-base interactions between surface groups are considered to be the predominant factor determining adhesion), as the monolayer converts the originally acidic silica surface to a basic (amine-terminated) one. These observations demonstrate a link between acid-base interactions and contact electrification.

Monolayer structure and evaporation resistance: a molecular dynamics study of octadecanol on water

This study examines intermolecular interactions of a monolayer of octadecanol (CH(3)(CH(2))(17)OH) on water as a function of surface density and temperature, using classical molecular dynamics simulations. We observe increased interaction between the alkyl chains (van der Waals) and hydroxyl groups (H-bonding) with increased surface density, which leads to increased order and packing within the monolayer. We also identified clear trends in the intermolecular interactions, ordering and packing of the monolayer molecules as a function of temperature. The observed trends can be closely related to features of the current empirical theories of evaporation resistance.

Comb polymers: are they the answer to monolayer stability?

Molecular monolayers reduce the amount of water lost to evaporation due to their ability to form closely packed films at the air-water interface. However, they are susceptible to loss from the water surface and poor performance on exposure to wind. This study combines experimental and theoretical techniques to investigate the properties of a small molecule monolayer mixed with comb polymers. The study reveals that at high concentrations of polymer the monolayer exhibits increased mechanical stability which improves the resistance to disruption by wind. Inclusion of hydrophilic functional groups along the backbone of the polymer leads to further improvements in wind stability. However, the improved wind stability observed in the composites comes at the expense of poorer water evaporation resistance.

Evaluation of an evaporation suppressing monolayer system in a controlled wave tank environment: a pilot investigation

Due to long-term drought conditions coupled with the apparent influence of global warming, compounding water loss has been a very serious issue across the vast majority of the Australian continent. During these drought conditions, the evaporative effect outweighs the amount of precipitation being received on a year to year basis. Several methods have been introduced in recent history to inhibit the amount of evaporative loss from various types of water bodies such as the application of thin layer chemical films (monolayers). A series of solvent, solid and suspension derived prototype monolayers, based on ethylene glycol monooctadecyl ether (C18E1), are examined in this current study as an approach to eliminate the problems seen to occur with the previous types of monolayers. This research evaluates the fundamental effect of wind and wave based activity upon these prototype monolayers in an atmospherically controlled enclosure positioned over a large extended water tank using real-time environmental measurements. Selected performance results for the prototype monolayers as measured within the enclosed water tank were compared to results measured from a control monolayer film based on a commonly used octadecanol suspension film. The results show that under varying wind and wave conditions the prototype monolayers inhibit evaporation at a level similar to or better than the octadecanol standard, even when delivered at lower raw dosages.

Myoepithelial molecular markers in human breast carcinoma PMC42-LA cells are induced by extracellular matrix and stromal cells

The microenvironment plays a key role in the cellular differentiation of the two main cell lineages of the human breast, luminal epithelial, and myoepithelial. It is not clear, however, how the components of the microenvironment control the development of these cell lineages. To investigate how lineage development is regulated by 3-D culture and microenvironment components, we used the PMC42-LA human breast carcinoma cell line, which possesses stem cell characteristics. When cultured on a two-dimensional glass substrate, PMC42-LA cells formed a monolayer and expressed predominantly luminal epithelial markers, including cytokeratins 8, 18, and 19; E-cadherin; and sialomucin. The key myoepithelial-specific proteins alpha-smooth muscle actin and cytokeratin 14 were not expressed. When cultured within Engelbreth-Holm- Swarm sarcoma-derived basement membrane matrix (EHS matrix), PMC42-LA cells formed organoids in which the expression of luminal markers was reduced and the expression of other myoepithelial-specific markers (cytokeratin 17 and P-cadherin) was promoted. The presence of primary human mammary gland fibroblasts within the EHS matrix induced expression of the key myoepithelial-specific markers, alpha-smooth muscle actin and cytokeratin 14. Immortalized human skin fibroblasts were less effective in inducing expression of these key myoepithelial-specific markers. Confocal dual-labeling showed that individual cells expressed luminal or myoepithelial proteins, but not both. Conditioned medium from the mammary fibroblasts was equally effective in inducing myoepithelial marker expression. The results indicate that the myoepithelial lineage is promoted by the extracellular matrix, in conjunction with products secreted by breast-specific fibroblasts. Our results demonstrate a key role for the breast microenvironment in the regulation of breast lineage development.

Non-isothermal crystallisation kinetics of self-assembled polyvinylalcohol/silica nano-composite

A novel polyvinylalcohol/silica (PVA/SiO₂) nano-composite is prepared with the self-assembly monolayer (SAM) technique. The SiO₂ nano-particles are homogenously distributed throughout the PVA matrixes as nano-clusters with an average diameter ranged from 15 to 240 nm depending on the SiO₂ contents. Using differential scanning calorimetry (DSC), the non-isothermal crystallisation behaviour and kinetics of the PVA/SiO₂ nano-composites are investigated and compared to those of the pure PVA. There are strong dependences of the degree of crystallinity (X_c), peak crystallisation temperature (T_p), half time of crystallisation (t_1/2), and Ozawa exponent (m) on the SiO₂ content and cooling rate. The crystallisation activation energy (E) calculated with the Kissinger model is markedly lower when a small amount of SiO₂ is added, then gradually increases and finally becomes higher than that of the pure PVA when there is more than 10% SiO₂ in the composite.

Dymanic mechanical analysis of polyvinylalcohol/silica nanocomposite

Polyvinylalcohol/Silica (PVA/SiO₂) nanocomposites with different SiO₂ contents are synthesized by employing a novel self-assembly monolayer (SAM) technique. The influence of the silica on dynamic mechanical properties of the nanocomposites is investigated by conducting dynamic mechanical analysis (DMA) and quasi-thermal mechanical analysis (Q-TMA). It is found that the storage modulus (E′), loss factor (tga), glass transition temperature (T_g), and activation energy (E_a) of prepared nanocomposites all show a strong dependence on the SiO₂ content. The Q-TMA results indicate that under a constant force, the elasticity of nanocomposites decreases with SiO₂ content, and the softening temperature moves to a higher temperature when more SiO₂ is added.