How well does club head speed correlate with gold handicaps?

The velocity at which a golf club impacts with a golf ball is known as club head speed. Although club head speed has been used to measure performance changes in a number of golf studies, it has not been validated as a golf performance measure. As handicap is the usual measure of performance, the purpose of this study was to investigate the relationship between club head speed and handicap, and to determine whether club head speed at impact is a valid measure of golfing performance. Forty-five male golfers aged 18–80 years, all with registered golfing handicaps (2–27), participated in this study. Each golfer performed 10 golf swings captured by a high-speed camera. Golfers' club head speeds were determined using Video Expert 2, a biomechanical computer program. Golfers with a lower handicap (ie, a better skill level) had faster club head speeds than higher handicap golfers. Linear regression analysis found club head speed to be highly correlated with handicap (r= 0.950). This relationship was described by the equation: In (club head speed)= 4.065 − 0.0214 x handicap. In conclusion, this study has shown that club head speed is a valid indicator of performance in golfers and may therefore be a useful performance measure in future laboratory-based studies.

Constructing detectors in schema complementary space for anomaly detection

This paper proposes an extended negative selection algorithm for anomaly detection. Unlike previously proposed negative selection algorithms which directly construct detectors in the complementary space of self-data space, our approach first evolves a number of common schemata through coevolutionary genetic algorithm in self-data space, and then constructs detectors in the complementary space of the schemata. These common schemata characterize self-data space and thus guide the generation of detection rules. By converting data space into schema space, we can efficiently generate an appropriate number of detectors with diversity for anomaly detection. The approach is tested for its effectiveness through experiment with the published data set iris.

Intelligent DDoS packet filtering in high-speed networks

Currently high-speed networks have been attacked by successive waves of Distributed Denial of Service (DDoS) attacks. There are two major challenges on DDoS defense in the high-speed networks. One is to sensitively and accurately detect attack traffic, and the other is to filter out the attack traffic quickly, which mainly depends on high-speed packet classification. Unfortunately most current defense approaches can not efficiently detect and quickly filter out attack traffic. Our approach is to find the network anomalies by using neural network, deploy the system at distributed routers, identify the attack packets, and then filter them quickly by a Bloom filter-based classifier. The evaluation results show that this approach can be used to defend against both intensive and subtle DDoS attacks, and can catch DDoS attacks’ characteristic of starting from multiple sources to a single victim. The simple complexity, high classification speed and low storage requirements make it especially suitable for DDoS defense in high-speed networks.

Speed, international security, and "New War" coverage in cyberspace

Mass media representations foster a view that the "War on Terror" is taking place both everywhere and nowhere, presenting Western governments with an opportunity to mobilize public support in new and ubiquitous ways. Starting with Virilio's critique of technology, speed, and de-territorialization, this article discusses the ways in which mass support is mobilized by the state in conventional pursuit of geopolitical objectives. Drawing on  contemporary international relations theory, the authors introduce the concept of "securitization" and discuss how war coverage in cyberspace has been used to securitize international threats, such as "global terrorism," to justify state intervention, including war. It is concluded that one of the paradoxes of war coverage in cyberspace is that whereas cyber-technologies should democratize the politics of war by liberating access to information about war, the state has coopted information and communication technologies to facilitate new forms of mass mobilization for war itself.

Speed control and policing in a cellular mobile network: speedNet

In this paper, we describe SpeedNet, a GSM network variant which resembles an ad hoc wireless mobile network where base stations keep track of the velocities of mobile users (cars). SpeedNet is intended to track mobile users and their speed passively for both speed policing and control of traffic. The speed of the vehicle is controlled in a speed critical zone by means of an electro-mechanical control system, suitably referred to as VVLS (Vehicular Velocity Limiting System). VVLS is mounted on the vehicle and responds to the command signals generated by the base station. It also determines the next base station to handoff, in order to improve the connection reliability and bandwidth efficiency of the underlying network. Robust Extended Kalman Filter (REKF) is used as a passive velocity estimator of the mobile user with the widely used proportional and integral controller speed control. We demonstrate through simulation and analysis that our prediction algorithm can successfully estimate the mobile user’s velocity with low system complexity as it requires two closest mobile base station measurements and also it is robust against system uncertainties due to the inherent deterministic nature in the mobility model.

Classifying DDoS packets in high-speed networks

Recently high-speed networks have been utilized by attackers as Distributed Denial of Service (DDoS) attack infrastructure. Services on high-speed networks also have been attacked by successive waves of the DDoS attacks. How to sensitively and accurately detect the attack traffic, and quickly filter out the attack packets are still the major challenges in DDoS defense. Unfortunately most current defense approaches can not efficiently fulfill these tasks. Our approach is to find the network anomalies by using neural network and classify DDoS packets by a Bloom filter-based classifier (BFC). BFC is a set of spaceefficient data structures and algorithms for packet classification. The evaluation results show that the simple complexity, high classification speed and accuracy and low storage requirements of this classifier make it not only suitable for DDoS filtering in high-speed networks, but also suitable for other applications such as string matching for intrusion detection systems and IP lookup for programmable routers.

The nose and tongue as chemical detectors

Human chemical senses are the gatekeepers of our digestive system. Chemical separation combined with human sensory perception has been used to isolate and identify a natural non-steroidal anti-inflammatory compound in olive oil.

Shortest equals fastest : upper primary children`s pre-conceptions of speed

An understanding of speed as distance travelled per unit time is fundamental to the development of the more complex conception of acceleration. This paper examines the opportunities provided for upper primary children to reveal and modify their pre-conceptions of speed through a walking activity developed as part of the Practical Mechanics in Primary Mathematics project.

Speed control and policing in a cellular mobile network: SpeedNet

In this paper, we describe SpeedNet, a GSM network variant which resembles an ad hoc wireless mobile network where base stations (possibly other vehicles in the network) keep track of the velocities of mobile users (cars). SpeedNet is intended to track mobile users and their speed passively for both speed policing and control of traffic. The speed of the vehicle is controlled in a speed critical zone by means of an electro-mechanical control system, suitably referred to as VVLS (vehicular velocity limiting system). VVLS is mounted in the vehicle and responds to the command signals generated by the base station. It also determines the next basestation to handoff, in order to improve the connection reliability and bandwidth efficiency of the underlying network. Robust extended Kalman filter (REKF) is used as a passive velocity estimator of the mobile user with the widely used proportional and integral controller speed control. We demonstrate through simulation and analysis that our prediction algorithm can successfully estimate the mobile users velocity with low system complexity as it requires two closet mobile-base station measurement and also it is robust against system uncertainties due to the inherent deterministic nature in the mobility model.

Convergence analysis of multi-stage PIC detectors

This paper analyses the convergence behaviour of the parallel interference cancellation (PIC) detector in code division multiple access (CDMA) systems. Using the results from previous stability analysis of an iterated-map neural network, the paper derives a general condition from which the sufficient condition for convergence of the PIC detector with tentative decision functions that are monotonically increasing at a sublinear rate can be calculated. As examples, the paper derives the sufficient conditions for convergence of the PIC detector with the clip decision and the hyperbolic tangent decision functions. The paper also examines the convergence behaviour of the PIC detector with hyperbolic tangent decision function via computer simulation and compares it with the analytical results.

High-precision five-axis machine for high-speed material processing using linear motors and parallel-serial kinematics

The paper describes some details of the mechanical and kinematics design of a five-axis mechanism. The design has been utilized to physically realize an industrial-scale five-axis milling machine that can carry a three KW spindle. However, the mechanism could be utilized in other material processing and factory automation applications. The mechanism has five rectilinear joints/axes. Two of these axes are arranged traditionally, i.e. in series, and the other three axes utilize the concept of parallel kinematics. This combination results in a design that allows three translational and two rotational two-mode degrees of freedom (DOFs). The design provides speed, accuracy and cost advantages over traditional five-axis machines. All axes are actuated using linear motors.

Dynamic simulation of collisions of heavy high-speed trucks with concrete barriers

Real vehicle collision experiments on full-scale road safety barriers are important to determine the outcome of a vehicle versus barrier impact accident. However, such experiments require large investment of time and money. Numerical simulation has therefore been imperative as an alternative method for testing concrete barriers. In this research, spring subgrade models were first developed to simulate the ground boundary of concrete barriers. Both heavy trucks and concrete barriers were modeled using finite element methods (FEM) to simulate dynamic collision performances. Comparison of the results generated from computer simulations and on-site full-scale experiments demonstrated that the developed models could be applied to simulate the collision of heavy trucks with concrete barriers to provide the data to design new road safety barriers and analyze existing ones.

Speed of adjustment within currency markets

One measure of market efficiency is the speed at which prices adjust to fundamental value with the arrival of information. This paper examines this issue by estimating speed of adjustment coefficients using three  methodologies for eight currencies for the entire year of 1996 using half hourly non-overlapping return intervals. We find that the bulk of adjustment to fundamental value for all currencies occurs within the hour but then quickly deteriorates. Within the hour adjustment is sufficiently quick to be considered efficient but the lack of full adjustment to fundamental value is not what would be predicted within an efficient market. There is no evidence for any of the currencies studied of a tendency to over react. There is also little difference in the speeds of adjustment between actively and less actively traded  currencies. There is however a definite difference in the speed at which currencies adjustment depending on whether they are free floating or managed exchange rates. Free floating rates adjust much quicker. Government intervention slows adjustment to fundamental value.

Not just for romance: applications of speed dating in social work education

In this article we address how a contemporary adaptation of the 'speed dating' model was used for educational purposes with two cohorts of social work students. We outline the dimensions of 'speed dating' as a contemporary social phenomenon, then address how this model relates specifically to groupwork process, and can be used to facilitate social work student learning. The curriculum for two classroom group activities using the 'speed dating' model are outlined, the first to develop university level study skills, the second for debriefing field placement learning experiences. Finally we examine why the 'speed dating' metaphor was successful in provoking a playful yet constructively creative space for students to engage in groupwork process.

Modelling factors of square tubes in high speed bending situations

Accurate finite element crash simulations of side impact depend upon a thorough understanding of dynamic tube bending. There is a need to understand the dynamic bending mode of square sections (equivalent of automotive structural parts) to obtain a greater confidence in CAE. This work varied strain rate and material definitions, such as Cowper-Symonds vs Zerilli-Armstrong, as well as initial velocity and yield strength. The results show that most of the plastic work is done between strains rates of 30 ¿ 300/s and strains up to 0.3. Peak strain rates were marginally above 1000/s with maximum strain greater than 1. When the strain rate definition and material model were modified, it was shown that a higher yield stress produced a higher reaction force. These results would suggest that the strain rate sensitivity needs to be carefully identified for accurate crash simulations.