Identification of nonlinear systems using hybrid functions

Most real systems have nonlinear behavior and thus model linearization may not produce an accurate representation of them. This paper presents a method based on hybrid functions to identify the parameters of nonlinear real systems. A hybrid function is a combination of two groups of orthogonal functions: piecewise orthogonal functions (e.g. Block-Pulse) and continuous orthogonal functions (e.g. Legendre polynomials). These functions are completed with an operational matrix of integration and a product matrix. Therefore, it is possible to convert nonlinear differential and integration equations into algebraic equations. After mathematical manipulation, the unknown linear and nonlinear parameters are identified. As an example, a mechanical system with single degree of freedom is simulated using the proposed method and the results are compared against those of an existing approach.

Autonomous underwater vehicles in a hazardous non-deterministic environment

This research investigated the cooperation of multi underwater robots to perform a task. This combined engineering design, electronics and consensus control to create systems capable of achieving the task. Challenges such as underwater radio communications were researched and a simulation framework was created and tested on virtual and real systems.

Robust strictly positive real synthesis of polynomial segments for discrete time systems

By using the result of robust strictly positive real synthesis of polynomial segments for continuous time systems, it is proved that, for any two n-th order polynomials a(z) and b(z), the Schur stability of their convex combination is necessary and sufficient for the existence of an n-th order polynomial c(z) such that c(z)/a(z) and c(z)/b(z) are both strictly positive real. We also provide the construction method of c(z). Illustrative examples are provided to show the effectiveness of this method.

Performance optimization for energy-aware adaptive checkpointing in embedded real-time systems

Using additional store-checkpoinsts (SCPs) and compare-checkpoints (CCPs), we present an adaptive checkpointing for double modular redundancy (DMR) in this paper. The proposed approach can dynamically adjust the checkpoint intervals. We also design methods to calculate the optimal numbers of checkpoints, which can minimize the average execution time of tasks. Further, the adaptive checkpointing is combined with the DVS (dynamic voltage scaling) scheme to achieve energy reduction. Simulation results show that, compared with the previous methods, the proposed approach significantly increases the likelihood of timely task completion and reduces energy consumption in the presence of faults.

Towards optimization of a real-world robotic-sensor system of systems

The problem of threat detection in an unstructured environment is considered. Three systems, comprising of robots and sensors, are proposed to form a system of systems (SoS) to find a solution to the problem. System interactions are defined to provide a framework for formulation as an SoS optimization problem. Different cost and objective functions are introduced for optimization of local criteria. Using different weights, a linear combination of the local cost and objective functions is obtained to propose a global objective function. An algorithm is suggested to find an optimum value for the global objective function leading towards optimization of the SoS.

Prototyping real-time systems using Petri net and object-oriented models

The objective of the research for this thesis is to develop techniques in order to build an executable model of a real-time system. This model is to be used early in the development of the system not only to detect errors in the specification of the system but also to validate expectations of the developer as to the operation of the system. A graphical specification of a real-time system called the transformation schema was chosen to be used to build the model. Two executable models of a real-time system are described.

Real-time early infectious outbreak detection systems using emerging technologies

The use of emerging technologies ( such as RFID - Radio Frequency Identification and remote sensing) can be employed to reduce health care costs and also to facilitate the automatic streamlining of infectious disease outbreak detection and monitoring processes in local health departments. It can assist medical practitioners with fast and accurate diagnosis and treatments. In this paper we outline the design and application of a real-time RFID and sensor-base Early Infectious (e.g., cholera) Outbreak Detection and Monitoring (IODM) system for health care.

Randomised controlled trials and 'unexpected' adverse events associated with newly released drugs : improvements in pharmacovigilance systems are necessary for real-time identification of patient safety risks

Adverse drug events are one of the major causes of morbidity in developed countries, yet the drugs involved in these events have been trialled and approved on the basis of randomised controlled trials (RCTs), regarded as the study design that will produce the best evidence.

Though the focus on adverse drug events has been primarily on processes and outcomes associated with the use of these approved drugs, attention needs to be directed to the way in which the RCT study design is structured. The implementation of controls to achieve internal validity in RCTs may be the very controls that reduce external validity, and contribute to the levels of adverse drug events associated with the release of a new drug to the wider patient population.

An examination of these controls, and the effects they can have on patient safety, underscore the importance of knowing about how the clinical trials of a drug are undertaken, rather than relying only on the recorded outcomes.

As the majority of new drugs are likely to be prescribed to older patients who have one or more comorbidities in addition to that targeted by a new drug, and as the RCTs of those drugs typically under-represent the elderly and exclude patients with multiple comorbidities, timely assessment of drug safety signals is essential.

It is unlikely that regulatory jurisdictions will undertake a reassessment of safety issues for drugs that are already approved. Instead, reliance has been placed on adverse drug event reporting systems. Such systems have a very low reporting rate, and most adverse drug events remain unreported, to the eventual cost to patients and healthcare systems.

This makes it essential for near real-time systems that can pick up safety signals as they occur, so that modifications to the product information (or removal of the drug) can be implemented.

Email and knowledge creation: supporting inquiring systems and enhancing wisdom

The real promise of organizational communication technologies may lie in their potential to facilitate participative discourse between knowledge workers at all levels in distributed locations and time zones. Such discourse enables the exchange of sometimes conflicting viewpoints through which resolution and symbiosis, organizational knowledge can be built. This chapter presents a case study of a Singerian inquiring organization which illustrates how afluid dynamic community of employees can use email to build knowledge, learn, make decisions, and enhance wisdom through a cycle of knowledge combination (divergence) and knowledge qualification (convergence). The chapter offers new theoretical perspectives on the enhancement of wisdom in inquiring organizations and provides practical insights into the use of email for supporting effective knowledge creation in inquiring organizations.

Constrained pole placement for linear systems using low-order output feedback controllers

The paper presents a simple approach to the problem of designing low-order output feedback controllers for linear continuous systems. The controller can place all of the closed-loop poles within a circle, C(- , 1/ β) , with centre at - and radius of 1/ β in the left half s-plane. The design method is based on transformation of the original system and then applying the bounded-real-lemma to the transformed system. It is shown that subjected to the solvability of an algebraic Riccati equation (ARE), output feedback controllers can then be systematically derived. Furthermore, the order of the controller is low and equals only the number of the open-loop poles lying outside the circle. A step-by-step design algorithm is given. Numerical examples are given to illustrate the design method.

Designing systems for e-commerce

Ethics is an important element in all aspects of computing, but proves to be a real problem in the development and delivery of E-Commerce systems. There are many aspects of ethics that can affect E-Commerce systems, but often research is focused on the ethics after the E-Commerce system has been implemented, focusing on issues such as trust, privacy and disclosure.

This paper will discuss how ethical matters can affect the design of E-Commerce systems and how a framework designed for E-Commerce can be used to create and deliver effective, ethical E-Commerce systems.

Haptic control of multi-axis robotic systems

Control of tele-operated remote robot’s is nothing new; the public was introduced to this 'new' field in 1986 when the Chernobyl cleanup began. Pictures of weird and wonderful robotic workers pouring concrete or moving rubble flooded the world. Integration of force feedback or 'haptics' to remote robot's is a new development and one that is likely to make a big difference in man-machine interaction. Development of haptic capable tele-operation schema is a challenge. Often platform specific software is developed for one off tasks. This research focussed on the development of an open software platform for haptic control of multiple remote robotic platforms. The software utilises efficient server/client architecture for low data latency, while efficiently performing required kinematic transforms and data manipulation in real time. A description of the algorithm, software interface and hardware is presented in this paper. Preliminary results are encouraging as haptic control has been shown to greatly enhances remote positioning tasks.

RFID-based real-time smart waste management system

In an environmental context, the use of RFID (radio frequency identification) and load cell sensor technology can be employed for not only bringing down waste management costs, but also to facilitate automating and streamlining waste (e.g., garbage, recycling, and green) identification and weight measurement processes for designing smart waste management systems. In this paper, we outline a RFID and sensor model for designing a system in real-time waste management. An application of the architecture is described in the area of RFID and sensor based automatic waste identity, weight, and stolen bins identification system (WIWSBIS).

Robust filtering for uncertain discrete-time systems with uncertain noise covariance and uncertain observations

The use of Kalman filtering is very common in state estimation problems. The problem with Kalman filters is that they require full prior knowledge about the system modeling. It is also assumed that all the observations are fully received. In real applications, the previous assumptions are not true all the time. It is hard to obtain the exact system model and the observations may be lost due to communication problems. In this paper, we consider the design of a robust Kalman filter for systems subject to uncertainties in the state and white noise covariances. The systems under consideration suffer from random interruptions in the measurements process. An upper bound for the estimation error covariance is proposed. The proposed upper bound is further minimized by selection of optimal filter parameters. Simulation example shows the effectiveness of the proposed filter.