Plastic crystal phases with high proton conductivity

The addition of up to 4 mol% of the strong acids, trifluoromethane sulfonic acid (TfOH) and bis-trifluoromethanesulfonyl imide [HN(Tf) 2], to the organic ionic plastic crystal (OIPC) [Choline][DHP] has been shown to dramatically increase the ionic conductivity by up to three orders of magnitude whilst still retaining the crystalline structure of the OIPC matrix. This enhanced proton diffusivity led to a significant proton reduction reaction in the electrochemical measurements. Powder XRD and DSC thermal analyses strongly suggest that these mixtures are single phase, crystalline materials. The work here also confirms that an increase in TfOH acid concentration (8 mol% and 12 mol%) results in a higher content of the amorphous phase as previously observed for the H 3PO 4/[Choline][DHP] system. © 2012 The Royal Society of Chemistry.

Enhancement of ‘dry’ proton conductivity by self-assembled nanochannels in all-solid polyelectrolytes

Proton transport has been recognized as an essential process in many biological systems, as well as electrochemical devices including fuel cells and redox flow batteries. In the present study, we address the pressing need for solvent-free proton conducting polymer electrolytes for high-temperature PEM fuel cell applications by developing a novel all-solid polyelectrolyte membrane with a self-assembled proton-channel structure. We show that this self-assembled nanostructure endows the material with exciting ‘dry’ proton conductivity at elevated temperatures, as high as 0.3 mS cm−1 at 120 °C, making it an attractive candidate for high-temperature PEM fuel cell applications. Based on the combined investigation of solid-state NMR, FTIR and conductivity measurements, we propose that both molecular design and nano-scale structures are essential for obtaining highly conductive anhydrous proton conductors.

Proton transport in choline dihydrogen phosphate/H3PO4 mixtures

Mixtures of the plastic crystal material choline dihydrogen phosphate [Choline][DHP] and phosphoric acid, from 4.5 mol% to 18 mol% H₃PO₄, were investigated and shown to have significantly higher proton conductivity compared to the pure [Choline][DHP]. This was particularly evident from the electrochemical hydrogen reduction reaction and the proton NMR diffusion measurements, in addition to ionic conductivity measured from the impedance spectroscopy. The ionic conductivity was observed to increase by more than an order of magnitude in phase I (i.e. the highest temperature solid phase in [Choline][DHP]) reaching up to 10⁻² S cm⁻¹. The multinuclear NMR spectroscopy data suggest that, at least on the timescale of the NMR measurement, the H⁺ cations and [DHP] anions are equivalent in both phases. The pulsed field gradient NMR diffusion measurements of the 18 mol% acid sample indicate that all three ions are mobile, however the H⁺ diffusion coefficient is an order of magnitude higher than for the [Choline] cation or the [DHP] anion, and therefore conduction in these materials is dominated by proton conductivity. The thermal stability, as measured by TGA, is unaffected with increasing acid additions and remains high; i.e. no significant mass loss below 200 °C.

Amino-functionalized mesoporous silica based polyethersulfone-polyvinylpyrrolidone composite membranes for elevated temperature proton exchange membrane fuel cells

It is important to find alternative membranes to the state-of-the-art polybenzimidazole based high temperature proton exchange membranes with high proton conductivity at elevated temperature but with simple synthesis procedures. In this work, inorganic-organic nanostructured hybrid membranes are developed based on a polyethersulfone-polyvinylpyrrolidone (PES-PVP) polymeric matrix with hollow mesoporous silica (HMS), amino-functionalized hollow mesoporous silica (NH2-HMS) and amino-functionalized mesoporous silica (NH2-meso-silica). The composite membranes show a significant increase in proton conductivity and a decrease in the activation energy for proton diffusion in comparison with the phosphoric acid (H3PO4, PA) doped PES-PVP membrane. And the composite membrane with NH2-HMS shows the best performance under the conditions in this study, achieving the highest proton conductivity of 1.52 × 10-1 S cm-1 and highest peak power density of 480 mW cm-2 at 180 °C under anhydrous conditions, which is 92.7% higher than that of the PA doped PES-PVP membrane at identical conditions. Such enhancement results from the facilitated proton transportation in the ordered mesoporous channels via the hydrogen bond between the -NH2 groups and H3PO4. The high water retention capability of silica materials with a hollow structure also contributes to the decrease of the activation of proton diffusion. Consequently, the results show promising potential of the NH2-HMS based PES-PVP composite membrane for the elevated temperature proton exchange membrane fuel cells.

Fast ion conduction in an acid doped pentaglycerine plastic crystal

High proton conductivity has been achieved in the high temperature plastic crystal phase of pentaglycerine when doped with strong acids, including trifluoromethanesulfonic acid (triflic acid) and methanesulfonic acid. The solid–solid phase transition from the ordered to plastic phase in this material occurs at 86 °C and conductivities of 10^{− 3} S/cm were measured in the high temperature plastic phase on the addition of 1 mol% triflic acid. In the case of methanesulfonic acid, the conductivities showed a greater dependence on acid concentration and were lower than for triflic acid, as expected on the basis of acid strengths. Electrochemical characterisation shows a clear hydrogen reduction process indicating that the proton is the mobile species in the plastic phase.

Fast ion conduction in molecular plastic crystals

Doping of lithium salts and acids into the plastic crystal phase of succinonitrile has shown for the first time of the possibility of creating solid state electrolytes based on plastic crystalline solvents where the matrix itself is neutral and hence not intrinsically conductive. These materials illustrate the concept of a solid state electrolyte solvent. Room temperature conductivities up to 3.4×10⁻⁴ S cm⁻¹ were obtained with 5 wt.% lithium bis(trifluoromethanesulfonylamide) in succinonitrile. Pulsed field gradient NMR measurements indicate that both cation and anion are mobile in this lattice. Proton conductivity was also observed when methane sulfonic acid or glacial acetic acid was used as dopants, however, the conductivity in these systems is limited by the poor dissociating ability of these acids.

Acid–organic base swollen polymer membranes

In this work, two different polymer membrane systems based on Nafion and Teflon were investigated as proton conductors for polymer membrane fuel cells. Water-free Nafion117 membranes swollen with different non-aqueous solvents were prepared. The solvents included imidazole, imidazole–imidazolium salt solutions, room temperature molten salts and molten salt–acid solutions. Teflon films were treated with a surfactant, or a Nafion solution, to improve their surface properties, and were subsequently swollen with phosphoric acid. Conductivity measurements were carried out on both the Nafion and Teflon membranes. Conductivities in the range of 10⁻³ S cm⁻¹ at around 100°C were obtained. This is still an order of magnitude lower than the corresponding water swollen Nafion at 80°C.

Probing ion exchange in the triflic acid-guanidinium triflate system: a solid-state nuclear magnetic resonance study

Knowledge of ion exchange and transport behavior in electrolyte materials is crucial for designing and developing novel electrolytes for electrochemical device applications such as fuel cells or batteries. In the present study, we show that, upon the addition of triflic acid (HTf) to the guanidinium triflate (GTf) solid-state matrix, several orders of magnitude enhancement in the proton conductivity can be achieved. The static 1H and 19F solid-state NMR results show that the addition of HTf has no apparent effect on local molecular mobility of the GTf matrix at room temperature. At higher temperatures, however, the HTf exhibits fast ion exchange with the GTf matrix. The exchange rate, as quantified by our continuum T2 fitting analysis, increases with increasing temperature. The activation energy for the chemical exchange process was estimated to be 58.4 kJ/mol. It is anticipated that the solid-state NMR techniques used in this study may be also applied to other organic solid-state electrolyte systems to investigate their ion-exchange processes.

Novel imidazolinium ionic liquids and organic salts

The preparation and physical properties of a novel family of ionic liquids and organic salts based on the imidazolinium cation are described, and compared with their imidazolium analogues in some cases. Ionic liquids were obtained with the triflate, formate and salicylate anions, while > 100 °C melting points were observed with acetate and several other benzoate derivatives. The triflate salt was less ion-conductive than the corresponding imidazolium salt, but less so than expected on the basis of its viscosity, suggesting a contribution from proton conductivity. The electrochemical window of the imidazolinium was slightly extended in the reductive direction, due to the lower proton activity produced by the cation in this case. Imidazolinium salts are also known to exhibit anti-corrosion properties and hence a preliminary study of this property is also reported; 2-methylimidazolinium 4-hydroxycinnamate was found to show strong anodic corrosion inhibition on mild steel.

Characterization of a proton conductor based on silicotungstic acid

It was found in this work that silicotungstic acid hydrate could be mixed with phosphoric acid (H₃PO₄, 85%) to make a viscous paste material with high conductivity (10⁻² S/cm at room temperature). The STA/H₃PO₄ paste samples were stable at 80°C in the atmosphere, and at 100°C under constant humidity over 10 days. The conductivity behavior of the paste samples has been investigated under various conditions, and it was found to be dependent on temperature, paste composition, and environment humidity.

A new class of proton-conducting ionic plastic crystals based on organic cations and dihydrogen phosphate

Choline dihydrogen phosphate ([N_1.1.1.2OH]DHP) and 1-butyl-3-methylimidazolium dihydrogen phosphate ([C₄mim]DHP) were synthesized as a new class of proton-conducting ionic plastic crystals. Both [N_1.1.1.2OH]DHP and [C₄mim]DHP showed solid–solid phase transition(s) and showed a final entropy of fusion lower than 20 J K⁻¹ mol⁻¹ which is consistent with Timmerman’s criterion for molecular plastic crystals. The ionic conductivity of [N_1.1.1.2OH]DHP was in the range of 10⁻⁶ S cm⁻¹–10⁻³ S cm⁻¹ in the plastic crystalline phase. On the other hand, the ionic conductivity of [C₄mim]DHP showed about 10⁻⁵ S cm⁻¹ in the plastic crystalline phase. [N_1.1.1.2OH]DHP showed one order of magnitude higher ionic conductivity than [C₄mim]DHP in the temperature range where the plastic phase is stable.

Proton transport properties in zwitterion blends with brønsted acids

We describe zwitterion, 3-(1-butyl-1H-imidazol-3-ium-3-yl)propane-1-sulfonate (Bimps), mixtures with 1,1,1-trifluoro-N-(trifluoromethylsulfonyl)methanesulfoneamide (HN(Tf)₂) as new proton transport electrolytes. We report proton transport mechanisms in the mixtures based on results from several methods including thermal analyses, the complex-impedance method, and the pulsed field gradient spin echo NMR (pfg-NMR) method. The glass transition temperature (Tg) of the mixtures decreased with increasing HN(Tf)₂ concentration up to 50 mol %. The Tg remained constant at −55 °C with further acid doping. The ionic conductivity of HN(Tf)₂ mixtures increased with the HN(Tf)₂ content up to 50 mol %. Beyond that ratio, the mixtures showed no increase in ionic conductivity (10⁻⁴ S cm⁻¹ at room temperature). This tendency agrees well with that of Tg. However, the self-diffusion coefficients obtained from the pfg-NMR method increased with HN(Tf)₂ content even above 50 mol % for all component ions. At HN(Tf)₂ 50 mol %, the proton diffusion of HN(Tf)₂ was the fastest in the mixture. These results suggest that Bimps cannot dissociate excess HN(Tf)₂, that is, the excess HN(Tf)₂ exists as molecular HN(Tf)₂ in the mixtures. The zwitterion, Bimps, forms a 1:1 complex with HN(Tf)₂ and the proton transport property in this mixture is superior to those of other mixing ratios. Furthermore, CH₃SO₃H and CF₃SO₃H were mixed with Bimps for comparison. Both systems showed a similar tendency, which differed from that of the HN(Tf)₂ system. The Tg decreased linearly with increasing acid content for every mixing ratio, while the ionic conductivity increased linearly. Proton transport properties in zwitterion/acid mixtures were strongly affected by the acid species added.

Characterization and evaluation of BaCo0.7Fe0.2Nb0.1O3−δ as a cathode for proton-conducting solid oxide fuel cells

This study characterizes BaCo0.7Fe0.2Nb0.1O3−δ (BCFN) perovskite oxide and evaluates it as a potential cathode material for proton-conducting SOFCs with a BaZr0.1Ce0.7Y0.2O3-δ (BZCY) electrolyte. A four-probe DC conductivity measurement demonstrated that BCFN has a modest electrical conductivity of 2–15 S cm−1 in air with p-type semiconducting behavior. An electrical conductivity relaxation test showed that BCFN has higher Dchem and Kchem than the well-known Ba0.5Sr0.5Co0.8Fe0.2O3−δ oxide. In addition, it has relatively low thermal expansion coefficients (TECs) with values of 18.2 × 10−6 K−1 and 14.4 × 10−6 K−1 at temperature ranges of 30–900 °C and 30–500 °C, respectively. The phase reaction between BCFN and BZCY was investigated using powder and pellet reactions. EDX and XRD characterizations demonstrated that BCFN had lower reactivity with the BZCY electrolyte than strontium-containing perovskite oxides such as SrCo0.9Nb0.1O3-δ and Ba0.6Sr0.4Co0.9Nb0.1O3−δ. The impedance of BCFN was oxygen partial pressure dependent. Introducing water into the cathode atmosphere reduced the size of both the high-frequency and low-frequency arcs of the impedance spectra due to facilitated proton hopping. The cathode polarization resistance and overpotential at a current density of 100 mA cm−2 were 0.85 Ω cm−2 and 110 mV in dry air, which decreased to 0.43 Ω cm−2 and 52 mV, respectively, in wet air (∼3% H2O) at 650 °C. A decrease in impedance was also observed with polarization time; this was possibly caused by polarization-induced microstructure optimization. A promising peak power density of ∼585 mW cm−2 was demonstrated by an anode-supported cell with a BCFN cathode at 700 °C.

Immunolocalisation of sodium/proton exchanger-like proteins in the gills of elasmobranchs

Na⁺/H⁺ exchangers are integral membrane proteins that exchange Na⁺ and H⁺ across cell membranes. The Na⁺/H⁺ exchangers 2 and 3 are epithelial isoforms in mammals and contribute to acid–base homeostasis. The gills of fishes, including elasmobranchs, are also associated with acid/base balance, and are probably the primary acid/base regulatory organ. This study examines the presence of Na⁺/H⁺ exchangers 2 and 3 using immunohistochemistry and immunoblotting in the gills of four species of elasmobranchs, the banjo ray (Trygonorrhina fasciata), southern eagle ray (Myliobatis australis), the gummy shark (Mustelus antarcticus) and the Australian angel shark (Squatina australis) using heterologous antibodies. Na⁺/H⁺ exchanger 2-like immunoreactivity was observed in the gills of the banjo ray, eagle ray and angel shark. In the banjo and eagle rays, this Na⁺/H⁺ exchanger-like immunoreactivity co-localised with immunoreactivity to Na⁺/K⁺-ATPase, a marker for the mitochondrial-rich cells of fishes. Na⁺/H⁺ exchanger 3-like immunoreactivity was only observed in the gills of the angel and gummy sharks, some Na⁺/H⁺ exchanger 3-like cells also showed Na⁺/K⁺-ATPase immunoreactivity. However, immunoblotting of banjo and eagle ray gill membranes demonstrated Na⁺/H⁺ exchanger 3-like immunoreactivity, which was not consistent with the immunohistochemical results. These data demonstrate the presence of epithelial Na⁺/H⁺ exchangers 2 and 3 in the gills of elasmobranchs and a link with acid/base regulation is suggested.

Effect of synthesis parameters on the electrical conductivity of polypyrrole-coated poly(ethylene terephthalate) fabrics

The effects of pyrrole, anthraquinone-2-sulphonic acid (AQSA) and iron(III) chloride (FeCl3) concentrations, reaction time and temperature on the electrical conductivity of polypyrrole (PPy) - coated poly(ethylene terephthalate) (PET) fabrics were investigated. With an increase in both the AQSA and FeCl3 concentrations, resistivity decreased to a point beyond which higher concentrations led to increased surface resistivity. Erosion of the polymer coating, in dynamic synthesis from continual abrasion, manifested as an exponential increase in the resistance of the coated textile substrate. This was not encountered in static synthesis conditions. Temperature affected the degree of surface and bulk polymerisation. The effect of polymerisation temperature on conductivity was negligible. Conductive polymer coating on textiles through chemical polymerisation enabled a smooth coherent film to encase individual fibres, which did not affect the tactile properties of the host substrate. The optimum FeCl3/pyrrole and AQSA FeCl3/pyrrole molar ratios were found to be 2.22 and 0.40 respectively.