Current distribution and Lorentz field modelling using cathode designs : a parametric approach

A mathematical model of magnetohydrodynamic (MHD) effects in an aluminium cell using numerical approximation of a finite element method is presented. The model predicts the current distribution in the cell and calculates the Lorentz force from the external magnetic field in molten metal for cathode blocks with different surface inclinations.

The findings indicated that the cathode surface inclinations have significant influence on cathode current density and Lorentz field distribution in the molten metal. The results establish a trend for the current density and associated MHD force distributions with increase in cathode inclination angle, φ. It has been found that cathode with φ = 5^o inclination could decrease 16 to 20 % of Lorentz force in the molten metal.

Technique for improving the reception of scattering signal behind an obstacle

This thesis presents a solution to the problem of receiving a signal in the shadow and fringe areas. Theoretical and experimental investigation of the field behind an obstacle in a line of sight transmission path for UHF / microwave signals has resulted in a new approach to the analysis of electromagnetic fields in the shadow of an obstacle. Analysis using this approach showed the field to consist of varying amplitude and phase distribution. Additional analysis predicted an increase in received signal could be achieved if correlation between the field and antenna structure could be obtained. This was accomplished with a new antenna design. The thesis presents experimental and photographic evidence to support the theory. A novel technique involving the matching of the antenna structure to the field distribution, resulted in an increase of received signal in the diffracted field of up to 4 dB.

Multi-layer implantable antenna for closed loop deep brain stimulation system

A multi-layer circular planar inverted-F antenna is designed and simulated at the industrial, scientific, and medical (ISM) band of 915 MHz for closed loop deep brain stimulation implant. The ISM band is considered due to the capabilities of small antenna size, high data rate, and long transmission range. In the proposed four-layer antenna, the top three radiating layers are meandered, and a high permittivity substrate and superstrate materials are used to limit the radius and the height of the antenna to 3.5 mm and 2.2 mm, respectively. The bottom layer works as a ground plate. The Roger RO3210 of εr = 10.2 and δ = 0.003 is used as a dielectric substrate and superstrate. The resonance frequency of the proposed antenna is 915 MHz with a bandwidth of 12 MHz at the return loss of -10 dB in free space. The stacked layered structure reduces the antenna size, and the circular shape makes it easily implantable into the human head. The antenna parameters (e.g. 3D gain pattern), SAR value, and electric field distribution within a six layers spherical head model are evaluated by using the finite element method (FEM). The feasibility of the wireless transmission of power, control and command signal to the implant in the human head is also examined. © 2012 IEEE.

Design and analysis of an antenna for wireless energy harvesting in head-mountable DBS device

This paper presents design and simulation of a circular meander dipole antenna at the industrial, scientific, and medical band of 915 MHz for energy scavenging in a passive head-mountable deep brain stimulation device. The interaction of the proposed antenna with a rat body is modeled and discussed. In the antenna, the radiating layer is meandered, and a FR-4 substrate is used to limit the radius and height of the antenna to 14 mm and 1.60 mm, respectively. The resonance frequency of the designed antenna is 915 MHz and the bandwidth of 15 MHz at a return loss of -10 dB in free space. To model the interaction of the antenna with a rat body, two aspects including functional and biological are considered. The functional aspect includes input impedance, resonance frequency, gain pattern, radiation efficiency of the antenna, and the biological aspect involves electric field distribution, and SAR value. A complete rat model is used in the finite difference time domain based EM simulation software XFdtd. The simulated results demonstrate that the specific absorption rate distributions occur within the skull in the rat model, and their values are higher than the standard regulated values for the antenna receiving power of 1W.

Electromagnetic energy harvesting in a head-mountable DBS device using a circular PIFA

A circular planar inverted-F antenna (PIFA) is designed and simulated at the industrial, scientific, and medical (ISM) band of 915 MHz for energy harvesting in a head-mountable deep brain stimulation device. Moreover, a rectifier is designed, and also the interaction of the PIFA with a rat head model is investigated. In the proposed PIFA, the top radiating layer is meandered, and a substrate of FR-4 is used. The radius and the height of the antenna are 10 mm and 1.8 mm, respectively. The bottom conductive layer works as a ground plate, and a superstrate of polyethylene reduces the electromagnetic penetration into the rat head. The resonance frequency of the designed antenna is 915 MHz with a bandwidth of 18 MHz at the return loss of -10 dB in free space. The antenna parameters (e.g. reflection coefficient, gain, radiation efficiency), electric field distribution, and SAR value are evaluated within a seven-layer rat head model by using the finite difference time domain EM simulation software XFdtd. The interactions of the antenna and the rat head model are studied in both functional and biological aspects.

Molecular alignment in nematic liquid crystals : a comparison between the results of experiments at high pressure and predictions based on mean field theories

The effects of high pressure on molecular arrangment in liquid crystals were observed by optical measurements on two nematogens. It was possible to deduce how volume varies as a factor of temperature and pressure and how nematic order parameter changes under the influence of high pressure.

Deformation field variations in equal channel angular extrusion due to back pressure

Flow lines were analysed in aluminium alloy 6061 during equal channel angular extrusion (ECAE) in a 90° die with and without the application of back pressure during pressing. The lines appeared much more rounded when a back pressure was applied compared to the case of conventional ECAE testing. With the help of an analytic flow function, the deformation field was obtained. It is shown that back pressure slightly lowers the total strain, strongly increases the size of the plastic zone and significantly reduces the plastic strain rate.

Counter-pressure-assisted ITP with electrokinetic injection under field-amplified conditions for bacterial analysis

Counter-pressure was used to extend the duration of field-amplified sample injection in isotachophoresis (FASI-ITP) in order to improve the detection of bacterial cells. Using 0.51-μm negatively charged encapsulated fluorescent beads as a model, the counter-pressure, injection and separation voltages, and times were optimized. Using 6-min 8,963-Pa counter-pressure FASI-ITP injections at −12 kV followed by mobilization of the ITP band with continued injection at −6 kV, the limit of detection (LOD) for Escherichia coli was improved to 78 cells/mL, a factor of 4 when compared with FASI-ITP without counter-pressure.

The leptodus shales of central Peninsular Malaysia: distribution, age and palaeobiogeographical affinities

The terms ‘Leptodus Shales’ and ‘Leptodus Beds’ have been used to describe a rich brachiopod bearing unit within the Permian argillaceous facies of the Central Belt of Peninsular Malaysia. To date there has been no formal description of this unit regarding its age, spatial distribution or faunal composition. A review of previous literature, backed by recently collected data from our field surveys and biostratigraphical studies reveals that there is a sequence of fossiliferous assemblages within the Leptodus Shales, which range in age from Middle Permian to possibly early Late Permian and extend geographically from southern Kelantan to southern Pahang, Peninsular Malaysia. These assemblages are found in argillaceous sediments which are often highly tuffaceous, and in northern Pahang are associated with pyroclastic volcanics of probable island-arc origin. The faunas are of Palaeo-equatorial affinity and are taxonomically close to faunas in Indochina, such as the Sisophon fauna in Cambodia. Typical elements include Vediproductus cf. punctatiformis (Chao), Transennatia gratiosa (Waagen), T. termierorum Sone, Leman and Shi, Uncuninellina timorensis (Beyrich), Leptodus richthofeni Kayser, L. cf. tenuis (Waagen), Leptodus nobilis (Waagen), Gubleria aff. ninglangensis Fang and Jiang, and Spyridiophora gubleri Termier and Termier.

Distribution of logs in a dry sclerophyll forest, Brisbane Ranges, Victoria

Fallen timber is an important habitat resource for small vertebrate and invertebrate animals in forests. This exploratory study investigated the pattern of distribution of fallen timber (here termed 'logs') in a dry sclerophyll forest in the Brisbane Ranges, Victoria, by sampling transects located in
gully, mid-slope and ridge positions, at each of 10 sites. Gullies supported a significantly higher density and volume of logs than ridges. The lowest abundance of logs was on ridges. The mean volume of logs was 98.6 m3/ha for gullies, 38.5 m3/ha at mid-slope positions and 13.1 m3/ha for ridges. The
volume of logs at transects was significantly positively correlated with the density of larger trees (diameter >40 em). A number of animal species in the Brisbane Ranges potentially use logs as a resource for shelter, foraging or perching, and hence the retention ofwoody debris will aid in habitat
management. The uneven distribution of logs in relation to forest topography and the size strueture of trees suggests that gullies, and forest stands with many large trees, are likely to be important habitats for species that use fallen timber. (The Victorian Naturalist 120 (2), 2003, 55-60)

Distribution and density of the hooded plover Thinornis rubricollis along a remote coastline in North West Tasmania

The Arthur-Pieman Conservation Area, on the north-west coast of Tasmania, provides many kilometres of ocean beach habitat for the vulnerable Hooded Plover Thinornis rubricollis. Hooded Plovers were surveyed along a 43.5 km section of coast which included both rocky shores and sandy beaches. They were absent from the rocky portion of the coastline (17.0 km), but 65 individuals were recorded along the sandy portion of coastline (26.5 km). The recorded population density of 2.45 birds/km compares favourably with reported mean densities for most parts of south-eastern Australia. Careful management and monitoring are required if the current numbers of the Hooded Plover in this area are to be maintained.

Managing as carers of stroke survivors : strategies from the field

Family members are required to provide increasingly complex care to relatives in the home. Stroke is a major cause of disability and there is increasing pressure being placed on carers to provide on-going support to stroke survivors living in the community. This study involved interviewing carers to determine their perspectives on the support and educational needs they require and the coping strategies they used. Data analysis revealed that carers experienced considerable uncertainty about their role as carers and their future and that they used a number of coping strategies to manage in their caring role. The coping strategies adopted by the carers included remaining positive, adapting to change, comparing their situation with others who were worse off, changing their employment status, humour, switching off and using family support. It is important for health care professionals to understand the complex role of the carers and to advise them on strategies they can use to assist managing this role.

Bryophyte distribution in blackwood forests of the Otway Ranges, Victoria

Tracheophyte and bryophyte distribution was surveyed in nineteen Blackwood-dominated sites of two different origins in the Otway Ranges. Nine sites were placed in sheltered gullies and ten sites were placed in upslope stands. Fifty-one tracheophyte taxa, 49 moss taxa and 39 liverwort (including hornwort) taxa were recorded in total. Bryophyte species richness was significantly higher in gully sites. The most frequent bryophyte taxa varied between gully and upslope sites. The percentage
occurrence of certain substrates was shown to be an important determinant of bryophyte species richness and composition. Decaying wood and soil supported the greatest number of bryophyte taxa compared with all other substrates.