The effects of improved strength on obstacle negotiation in community-living older adults

Poor mobility has been associated with age-related deterioration in muscle strength. While previous work has examined the effects of improved strength on level walking, we have quantified the effects of a resistance-training program on obstructed gait tasks using biomechanical-dependent measures. Forty-five community-dwelling participants aged 62 years or older were randomised to either a control (n=16) or experimental group (n=29). The experimental subjects exercised for 24 weeks on a progressive resistance-training program designed to improve lower body strength. Dynamic strength was assessed at weeks 0 and 24 as well as specific laboratory gait kinetics and kinematics during stepping over an obstacle and negotiation of a raised surface set at 10, 20 and 30% of each subject's leg length.

Gait termination : a review of experimental methods and the effects of aging and gait pathologies

The study of human gait has expanded and diversified to the extent that it is now possible to identify a substantive literature concerning a variety of gait tasks, such as gait initiation [Halliday SE, Winter DA, Frank JS, Patla AE, Prince F. The initiation of gait in young, elderly, and Parkinson's disease subjects. Gait Posture 1998;8:8–14; Mickelborough J, van der Linden ML, Tallis RC, Ennos AR. Muscle activity during gait initiation in normal elderly people. Gait Posture 2004;19:50–57], stepping over and across obstacles [Patla AE, Prentice SD, Robinson C, Newfold J. Visual control of locomotion: strategies for changing direction and for going over obstacles. J Exp Psych 1991;17:603–34; Chen, HC, Ashton-Miller JA, Alexander NB, Schultz AB. Effect of age and available response time on ability to step over an obstacle. J Gerontol 1994;49:227–33; Sparrow WA, Shinkfield AJ, Chow S, Begg RK. Gait characteristics in stepping over obstacles. Hum Mov Sci 1996;15:605–22; Begg RK, Sparrow WA, Lythgo ND. Time-domain analysis of foot–ground reaction forces in negotiating obstacles. Gait Posture 1998;7:99–109; Patla AE, Rietdyk S. Visual control of limb trajectory over obstacles during locomotion: effect of obstacle height and width. Gait Posture 1993;1:45–60] negotiating raised surfaces such as curbs and stairs [Begg RK, Sparrow WA. Gait characteristics of young and older individuals negotiating a raised surface: implications for the prevention of falls. J Gerontol Med Sci 2000;55A:147–54; Mcfayden BJ, Winter DA. An integrated biomechanical analysis of normal stair ascent and descent. J Biomech 1988;21:733–44]. In addition, increasing research interest in age-related declines in gait that might predispose individuals to falls has engendered a very extensive literature concerning ageing effects on gait. While rapid locomotor adjustments are common in the course of daily activities there has been no previous review of the findings concerning gait adaptations when walking is terminated both rapidly and unexpectedly. The aims of this review were first, to summarise the key research findings and methodological considerations from studies of termination. The second aim was to demonstrate the effects of ageing and gait pathologies on termination with respect to the regulation of step characteristics, lower-limb muscle activation patterns and foot–ground reaction forces.

Preliminary investigations into tris(2,2'-bipyridyl) ruthenium (III) as a chemiluminescent reagent for the detection of 3,6-diacetylmorphine (heroin) on surfaces

The use of tris(2,2'-bipyridyl) ruthenium (III) as a chemiluminescent spray reagent spot-test for heroin is discussed. Two forms of the reagent are investigated an aqueous and an anhydrous where both were found to give vastly different results. The aqueous reagent giving slow, low intensity chemiluminescence whilst the anhydrous reagent gave a fast, bright response in the presence of 3,6-diacetylmorphine. The anhydrous reagent is less sensitive the slow, intensity response is characteristic of only two opiates tested 3,6-diacetylmorphine and 3-monoacetylmorphine.

Control of lead and trail limbs during obstacle crossing following stroke

Background and Purpose. Obstacle crossing is compromised following stroke. The purpose of this study was to quantify modifications during obstacle clearance following stroke.

Subjects. Twelve subjects with stroke and 12 subjects without stroke participated in the study.

Methods. Kinematic variables were measured while participants crossed a 4-cm-high obstacle. Subjects with stroke walked at a self-selected speed; subjects without stroke walked at a comparable speed and at a self-selected speed.

Results. Several modifications were observed following stroke with both groups walking at self-selected speeds. The affected lead limb was positioned closer to the obstacle before crossing. Affected trail-limb clearance over the obstacle was reduced. Both affected and unaffected lead and trail limbs landed closer to the obstacle after clearance. Swing time was increased in the affected lead limb after obstacle clearance. Fewer modifications were detected at matched walking speed; the trail limb still landed closer to the obstacle.

Discussion and Conclusion. Modifications during obstacle crossing following stroke may be partly related to walking speed. The findings raise issues of safety because people with stroke demonstrated reduced clearance of a 4-cm obstacle and limb placement closer to the obstacle after clearance.

Lawsone : a novel reagent for the detection of latent fingermarks on paper surfaces

Lawsone (2-hydroxy-1,4-naphthoquinone) reacts with latent fingermark deposits on paper surfaces to yield purple-brown impressions of ridge details which are also photoluminescent; this compound represents the first in a completely new class of fingermark detection reagents.

Parametric modelling and the tessellation of architectural surfaces

Parametric modelling is gaining in popularity as both a fabrication and design tool, but its application in the architectural design industry has not been widely explored. This form of modelling has the ability to generate complex forms with intuitively reactive components, allowing designers to express and
fabricate structures previously too laborious and geometrically complex to realise. The key aim of the paper is to address the increasing need for seamless and bi-directional connectivity between the design, modelling and
fabrication ambit.

Building surfaces and their effect on the urban thermal environment

Use of high reflectance surfaces reduces the amount of solar radiation absorbed through building envelopes and urban structures and thus keeping their surfaces cooler. The cooling energy savings by using high reflectance surfaces have been well documented. Higher surface temperatures add to increasing the ambient temperature as convection intensity is higher. Such temperature increase has significant impacts on the air conditioning energy utilization in hot climates. This study makes use of numerical simulations to analyze the effect of commonly used building materials on the air temperature. A part of the existing CBD (Central Business District) area of Singapore was selected for the study. A series of Computational Fluid Dynamics (CFD) simulations have been carried out using the software CFX-5.6. It was found that at low wind speeds, the effect of materials on the air temperature was significant and the temperature at the middle of a narrow canyon increased up to 2.5[degrees]C with the facade material having lower reflectance.

Measurement of the mass transfer coefficient at workpiece surfaces in heat treatment furnaces

The mass (e.g. carbon) transfer coefficient at a workpiece surface is an important kinetic factor to control the heat treatment process of the workpiece and to evaluate heat treatment equipment. The coefficient can be calculated from the carbon concentration at the surface of a sample carburized in a carburizing furnace for a given time. Two common measurement methods which use a thin plate and employ a component as samples respectively are evaluated and compared for sensitivity and uncertainty. The comparison shows that the use of a component produces higher measurement precision and also has the advantage in measuring the carbon transfer coefficients at different treated positions. This method is then extended and discussed methodologically. Also two equations are proposed to calculate the carbon transfer coefficient and its uncertainty, respectively. This method is also applied to measure the carbon transfer coefficient in a fluidized bed heat treatment furnace.

Tribology of lubricated nitrocarburised and titanium carbonitride surfaces

In the current work, two different coatings, nitrocarburised (CN) and titanium carbonitride (TiCN) on M2 grade high speed tool steel, were prepared by commercial diffusion and physical vapour deposition (PVD) techniques, respectively. Properties of the coating were characterised using a variety of techniques such as Glow-Discharge Optical Emission Spectrometry (GD-OES) and Scanning Electron Microscopy (SEM). Three non-commercial, oil-based lubricants with simplified formulations were used for this study. A tribological test was developed in which two nominally geometrically-identical crossed cylinders slide over each other under selected test conditions. This test was used to evaluate the effectiveness of a pre-applied lubricant film and a surface coating for various conditions of sliding wear. Engineered surface coatings can significantly improve wear resistance of the tool surface but their sliding wear performances strongly depend on the type of coating and lubricant combination used. These coating-lubricant interactions can also have a very strong effect on the useful life of the lubricant in a tribological system. Better performance of lubricants during the sliding wear testing was achieved hen used with the nitrocarburised (CN) coating. To understand the nature of the interactions and their possible effects on the coating-lubricant system, several surface analysis techniques were used. The molecular level investigation of Fourier Transform Infrared Spectroscopy (FTIR) revealed that oxidative degradation occurred in all used oil-based lubricants during the sliding wear test but the degradation behaviour of oil-based lubricants varied with the coating-lubricant system and the wear conditions. The main differences in the carbonyl oxidation region of the FTIR spectra (1900-1600 cm-1) between different coating-lubricant systems may relate to the effective lifetime of the lubricant during the sliding wear test. Secondary Ion Mass Spectrometry (SIMS) depth profiling shows that the CN coating has the highest lubricant absorbability among the tested tool surfaces. Diffusion of chlorine (C1), hydrogen (H) and oxygen (O) into the surface of subsurface of the tool suggested that strong interactions occurred between lubricant and tool surface during the sliding wear test. The possible effects of the interactions on the performance of whole tribological system are also discussed. The study of Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS) indicated that the envelope of hydrocarbons (CmHn) of oil lubricant in the positive TOF-SIMS spectra shifted to lower mass fragment after the sliding wear testing due to the breakage of long-chain hydrocarbons to short-chain ones during the degradation of lubricant. The shift of the mass fragment range of the hydrocarbon (CmHn) envelope caries with the type of both tool surface and lubricant, again confirming that variation in the performance of the tool-lubricant system relates to the changes in surface chemistry due to tribochemical interactions at the tool-lubricant interface under sliding wear conditions. The sliding wear conditions resulted in changes not only in topography of the tool surface due to mechanical interactions, as outlined in Chapter 5, but also in surface chemistry due to tribochemical interactions, as discussed in Chapters 6 and 7.

Technique for improving the reception of scattering signal behind an obstacle

This thesis presents a solution to the problem of receiving a signal in the shadow and fringe areas. Theoretical and experimental investigation of the field behind an obstacle in a line of sight transmission path for UHF / microwave signals has resulted in a new approach to the analysis of electromagnetic fields in the shadow of an obstacle. Analysis using this approach showed the field to consist of varying amplitude and phase distribution. Additional analysis predicted an increase in received signal could be achieved if correlation between the field and antenna structure could be obtained. This was accomplished with a new antenna design. The thesis presents experimental and photographic evidence to support the theory. A novel technique involving the matching of the antenna structure to the field distribution, resulted in an increase of received signal in the diffracted field of up to 4 dB.

Bioactivating the surfaces of titanium by sol-gel process

In the present study, titanium (Ti) samples were surface-modified by titania (TiO₂), silica (SiO₂) and hydroxyapatite (HA) coatings using a sol-gel process. The bioactivity of the film-coated Ti samples was investigated by cell attachment and morphology study using human osteoblast-like SaOS-2 cells. Results of the cell attachment indicated that the densities of cell attachment on the surfaces of Ti samples were significantly increased by film coatings; the density of cell attachment on HA film-coated surface was higher than those on TiO₂ and SiO₂ film-coated surfaces. Cell morphology study showed that the cells attached, spread and grew well on the three kinds of film-coated surfaces. It can be concluded that the three kinds of film coatings can bioactivate the surfaces of Ti samples effectively. Overall, Ti sample with HA film-coated surface exhibited the best bioactivity.

Impaired K+ regulation contributes to exercise limitation in end-stage renal failure

Background

Patients with end-stage renal failure (ESRF) exhibit grossly impaired maximal exercise performance. This study investigated whether K+ regulation during exercise is impaired in ESRF and whether this is related to reduced exercise performance.

Methods

Nine stable hemodialysis patients and eight controls (CON) performed incremental cycling exercise to volitional fatigue, with measurement of peak oxygen consumption (VdotO2 peak). Arterial blood was sampled during and following exercise and analyzed for plasma [K+] (PK).

Results

The VdotO2 peak was approximately 44% less in ESRF than in CON (P < 0.001), whereas peak exercise PK was greater (7.23 plusminus 0.38 vs. 6.23 plusminus 0.14 mmol dot L-1, respectively, P < 0.001). In ESRF, the rate of rise in PK during exercise was twofold greater (0.43 plusminus 0.05 vs. 0.23 plusminus 0.03 mmol dot L-1dotmin-1, P < 0.005) and the ratio of rise in PK relative to work performed was 3.7-fold higher (90.1 plusminus 13.5 vs. 24.7 plusminus 3.3 nmol dot L-1dot J-1, P < 0.001). A strong inverse relationship was found between VdotO2 peak and the DeltaPKdot work-1 ratio (r = -0.80, N = 17, P < 0.001).

Conclusions

Patients with ESRF exhibit grossly impaired extrarenal K+ regulation during exercise, demonstrated by an excessive rise in PK relative to work performed. We further show that K+ regulation during exercise was correlated with aerobic exercise performance. These results suggest that disturbed K+ regulation in ESRF contributes to early muscle fatigue during exercise, thus causing reduced exercise performance.

The detection of latent fingermarks on porous surfaces using amino acid sensitive reagents : a review

The introduction of ninhydrin treatment as a chemical technique for the visualisation of latent fingermarks on porous surfaces revolutionised approaches to forensic fingermark examination. Since then, a range of amino acid sensitive reagents has been developed and such compounds are in widespread use by law enforcement agencies worldwide. This paper reviews the development and use of these reagents for the detection of latent fingermarks on porous surfaces. A brief overview is provided, including an historical background, forensic significance, and a general approach to the development of latent fingermarks on porous surfaces. This is followed by a discussion of specific amino acid sensitive treatments.

Combined continuous wave and pulsed plasma modes : For more stable interfaces with higher functionality on metal and semiconductor surfaces

A novel approach to producing improved bio-interfaces by combining continuous wave (CW) and pulsed plasma polymerization (PP) modes is reported. This approach has enabled the generation of stable interfaces with a higher density of primary amine functionality on metal, ceramic and semiconductor surfaces. Heptylamine (HA) was used as the amine-precursor. In this new design, a thin CW PPHA layer is introduced to provide strong cross-linking and attachment to the metal or semiconductor surfaces and to provide a good foundation for better bonding a pulsed PPHA layer with high retention of functional groups. The combined mode provides the pulsed mode advantage of a 3-fold higher density of primary amines, while retaining much of the markedly higher stability in aqueous solutions of the continuous mode.