Magnet-induced temporary superhydrophobic coatings from one-pot synthesized hydrophobic magnetic nanoparticles.

In this paper, we report on the production of superhydrophobic coatings on various substrates (e.g., glass slide, silicon wafer, aluminum foil, plastic film, nanofiber mat, textile fabrics) using hydrophobic magnetic nanoparticles and a magnet-assembly technique. Fe3O4 magnetic nanoparticles functionalized with a thin layer of fluoroalkyl silica on the surface were synthesized by one-step coprecipitation of Fe2+/Fe3+ under an alkaline condition in the presence of a fluorinated alkyl silane. Under a magnetic field, the magnetic nanoparticles can be easily deposited on any solid substrate to form a thin superhydrophobic coating with water contact angle as high as 172°, and the surface superhydrophobicity showed very little dependence on the substrate type. The particulate coating showed reasonable durability because of strong aggregation effect of nanoparticles, but the coating layer can be removed (e.g., by ultrasonication) to restore the original surface feature of the substrates. By comparison, the thin particle layer deposited under no magnetic field showed much lower hydrophobicity. The main reason for magnet-induced superhydrophobic surfaces is theformation of nano- and microstructured surface features. Such a magnet-induced temporary superhydrophobic coating may have wide applications in electronic, biomedical, and defense-related areas.

A one-pot, three-component approach to functionalised tetrahydroisoquinolines using domino Heck-aza-Michael reactions

A one-pot, three-component method incorporating a domino Heck–aza-Michael reaction has been developed for the rapid synthesis of functionalised tetrahydroisoquinolines. Following the in situ generation of an acrylamide, a domino process involving intermolecular Heck reaction and subsequent intramolecular aza-Michael addition affords tetrahydroisoquinolines bearing C1-acetamide functionality.

One-pot facile synthesis of platinum nanoparticle decorated reduced graphene oxide composites and their application in electrochemical detection of rutin

We report on the synthesis of platinum nanoparticle-reduced graphene oxide (PtNP-rGO) composites and their application as a novel architecture in electrochemical detection of rutin. PtNPs anchored over rGO are synthesized through a facile one-pot synthesis method, where the reduction of GO and in situ generation of PtNPs occurred concurrently. The characterization results of transmission electron microscopy (TEM) demonstrate that PtNPs with small particle sizes are dispersed on the rGO matrix. Electrochemical measurements reveal that a PtNP-rGO modified glass carbon electrode (GCE) directly catalyzes rutin oxidation and displays an enhanced current response compared with a bare GCE. Under the optimal experimental conditions, the peak current was linear with rutin concentration in the range of 5 × 10^-8 to 1 × 10^-5 M with the detection limit of 1 × 10^-8 M (S/N = 3) by differential pulse voltammetry. The proposed method was successfully applied to determine rutin in tablet samples with satisfactory results. This journal is

One-pot synthesis of aminated multi-walled carbon nanotube using thiol-ene click chemistry for improvement of epoxy nanocomposites properties

A non-oxidative method based on thiol-ene click chemistry for functionalization of multi-walled carbon nanotube (CNT) was performed in order to improve the interfacial interactions between epoxy matrix and CNT. In this way, the CNT was aminated using 2-aminoethanethiol hydrochloride radicals thermally produced by a peroxide radical initiator. The aminated CNT (CNT-NH2) was characterized by FTIR, TGA, and solubility evaluations, confirming that thiol radicals are successfully grafted onto the CNT surface with a proper yield. Various percentages of pure CNT (p-CNT) and CNT-NH2 were then incorporated into epoxy matrix to evaluate the effect of the functionalization of CNT on thermal, mechanical, and morphological properties. The nanocomposites were characterized by DMA, tensile testing, and TGA. Results showed that glass transition temperature, tensile properties and thermal stability of epoxy nanocomposites containing CNT-NH2 improves significantly compared to those containing unmodified CNT. These results prove the role of amino-functionalization in improving the interfacial adhesion between epoxy and CNT, which was further confirmed by morphological observations of fracture surfaces of the nanocomposites.

Synthesis of 2-(selenophen-2-yl) pyrroles and their electropolymerization to electrochromic nanofilms

The divergent syntheses of 2-(selenophen-2-yl)pyrroles and their N-vinyl derivatives from available 2-acylselenophenes and acetylenes in a one-pot procedure make these exotic heterocyclic ensembles accessible. Now we face a potentially vast area for exploration with a great diversity of far-reaching consequences including conducting electrochromic polymers with repeating of pyrrole and selenophene units (emerging rivalry for polypyrroles and polyselenophenes), the synthesis of functionalized pyrrole–selenophene assembles for advanced materials, biochemistry and medicine, exciting models for theory of polymer conductivity.

Mesityltellurenyl cations stabilized by triphenylpnictogens [MesTe(EPh₃)] + (E = P, As, Sb)

The homoleptic 1:1 Lewis pair (LP) complex [MesTe(TeMes₂)]O₃SCF₃ (1) featuring the cation [MesTe(TeMes₂)]+ (1a) was obtained by the reaction of Mes₂Te with HO₃SCF₃. The reaction of 1 with Ph₃E (E = P, As, Sb, Bi) proceeded with substitution of Mes₂Te and provided the heteroleptic 1:1 LP complexes [MesTe(EPh₃)]O₃SCF₃ (2, E = P; 3, E = As) and [MesTe(SbPh₃)][Ph₂Sb(O₃SCF₃)₂] (4) featuring the cations [MesTe(EPh₃)]+ (2a, E = P; 3a, E = As; 4a, E = Sb) and the anion [Ph₂Sb(O₃SCF₃)₂]− (4b). In the reaction with Ph₃Bi, the crude product contained the cation [MesTe(BiPh₃)]+ (5a) and the anion [Ph₂Bi(O₃SCF₃)₂]− (5b); however, the heteroleptic 1:1 LP complex [MesTe(BiPh₃)][Ph₂Bi(O₃SCF₃)₂] (5) could not be isolated because of its limited stability. Instead, fractional crystallization furnished a large amount of Ph₂BiO₃SCF₃ (6), which was also obtained by the reaction of Ph₃Bi with HO₃SCF₃. The formation of the anions 4b and 5b involves a phenyl group migration from Ph₃E (E = Sb, Bi) to the MesTe+ cation and afforded MesTePh as the byproduct, which was identified in the mother liquor. The heteroleptic 1:1 LP complexes 2–4 were also obtained by the one-pot reaction of Mes₂Te, Ph₃E (E = P, As, Sb) and HO₃SCF₃. Compounds 1–4 and 6 were investigated by single-crystal X-ray diffraction. The molecular structures of 1a–4a were used for density functional theory calculations at the B3PW91/TZ level of theory and studied using natural bond order (NBO) analyses as well as real-space bonding descriptors derived from an atoms-in-molecules (AIM) analysis of the theoretically obtained electron density. Additionally, the electron localizability indicator (ELI-D) and the delocalization index are derived from the corresponding pair density.

Graphene/zinc nano-composites by electrochemical co-deposition

We describe for the first time the electrochemical co-deposition of composites based on a reactive base metal and graphene directly from a one-pot aqueous mixture containing graphene oxide and Zn2+. In order to overcome stability issues the Zn2+ concentration was kept below a critical threshold concentration, ensuring stable graphene oxide suspensions in the presence of cationic base metal precursors. This approach ensures the compatibility between the cationic base metal precursor and graphene oxide, which is more challenging compared to previously reported anionic noble metal complexes. Spectroscopic evidence suggests that the reason for destabilisation is zinc complexation involving the carboxylate groups of graphene oxide. The composition of the electrodeposited co-composites can be tuned by adjusting the concentration of the precursors in the starting mixture. The nano-composites show zinc particles (<3 nm) being uniformly dispersed amongst the graphene sheets. It is also demonstrated that the composites are electrochemically active and suitable for energy storage and energy conversion applications. However, a factor limiting the discharge efficiency is the reactivity of the base metal (low reduction potential and small particle size) which undergoes rapid oxidation when exposed to aqueous electrolytes.

Spin-crossover, mesomorphic and thermoelectrical properties of cobalt(II) complexes with alkylated N3-Schiff bases

Three new cobalt(ii) complexes, [Co(L12)2](BF4)2 (1), [Co(L14)2](BF4)2·H2O (2) and [Co(L16)2](BF4)2·H2O (3), where L12-16 are N3-Schiff bases appended with linear C12-16 carbon chains at the nitrogen atoms, were obtained in good yields by facile one-pot reactions. The single crystal X-ray structure of complex 1 shows a tetragonally compressed CoN6 coordination geometry. The melting temperatures of 1-3 were lower than 373 K, while their decomposition temperatures were above 473 K. All complexes have high-spin Co(ii) centres at 300 K and exhibit a columnar mesophase above 383 K. Complexes 1 and 3 showed normal thermal spin-crossover behaviour with weak hysteresis loops at about 320 K. Hence, these complexes showed uncoupled phase transitions (class iiia). The values for the Seebeck coefficient (Se) of the cobalt redox couples formed from 1 and 2 were 1.89 ± 0.02 mV K-1 and 1.92 ± 0.08 mV K-1, respectively, identifying them as potential thermoelectrochemical materials.

Rapid domino [3+2] cycloaddition, [4+2] cycloreversion, ring-opening and aromatisation of a fused oxanorbornane substrate

Heating a dioxa-bridged diene with a cyclobutane epoxide for 10 min under microwave conditions (150 °C) gave an unexpected aryloxanorbornane product (20%). This adduct is proposed to occur via a [3+2] dipolar cycloaddition, retro-Diels-Alder reaction, ring-opening and subsequent aromatisation.

Synthesis of 2-(Benzylthio)-4-(trifluoromethyl)thiazole-5-carboxylates using S -benzylisothiouronium halides as thiol equivalents

S-Benzylisothiouronium halides are used as shelf-stable, odorless thiol equivalents. The method developed is used to access 2-(benzylthio)-4-(trifluoromethyl)thiazole carboxyl building blocks. Using the latent trifluoromethyl substituent the reactions could be monitored using ¹⁹F NMR spectroscopy.

Preparation of size-selective Mn3O4 hexagonal nanoplates with superior electrochemical properties for pseudocapacitors

Porous Mn3O4 hexagonal nanoplates were synthesized through annealing the hydrohausmannite precursor obtained by a one-pot hydrothermal process and by precisely controlling the concentrations of potassium hydroxide and glucose. The effect of potassium hydroxide and glucose on the growth of hexagonal nanoplates was investigated, and a growth mechanism was also proposed. Due to its abundant pores, the pure Mn3O4-based electrode exhibits excellent cycling stability with 100% capacity retention after 5000 cycles. The asymmetric supercapacitor exhibited high performance with an energy density of 17.276 W h kg^-1 at a power density of 207.3 W kg^-1 in a wide potential window of 1.5 V.

Synthesis of a porous sheet-like V₂O₅-CNT nanocomposite using an ice-templating 'bricks-and-mortar' assembly approach as a high-capacity, long cyclelife cathode material for lithium-ion batteries

Tailoring the nanostructures of electrode materials is an effective way to enhance their electrochemical performance for energy storage. Herein, an ice-templating "bricks-and-mortar" assembly approach is reported to make ribbon-like V2O5 nanoparticles and CNTs integrated into a two-dimensional (2D) porous sheet-like V2O5-CNT nanocomposite. The obtained sheet-like V2O5-CNT nanocomposite possesses unique structural characteristics, including a hierarchical porous structure, 2D morphology, large specific surface area and internal conducting networks, which lead to superior electrochemical performances in terms of long-term cyclability and significantly enhanced rate capability when used as a cathode material for LIBs. The sheet-like V2O5-CNT nanocomposite can charge/discharge at high rates of 5C, 10C and 20C, with discharge capacities of approximately 240 mA h g-1, 180 mA h g-1, and 160 mA h g-1, respectively. It also retains 71% of the initial discharge capacity after 300 cycles at a high rate of 5C, with only 0.097% capacity loss per cycle. The rate capability and cycling performance of the sheet-like V2O5-CNT nanocomposite are significantly better than those of commercial V2O5 and most of the reported V2O5 nanocomposite.