Electric contributions to magnetic force microscopy response from graphene and MoS2 nanosheets

Magnetic force microscopy (MFM) signals have recently been detected from whole pieces of mechanically exfoliated graphene and molybdenum disulfide (MoS2) nanosheets, and magnetism of the two nanomaterials was claimed based on these observations. However, non-magnetic interactions or artefacts are commonly associated with MFM signals, which make the interpretation of MFM signals not straightforward. A systematic investigation has been done to examine possible sources of the MFM signals from graphene and MoS2 nanosheets and whether the MFM signals can be correlated with magnetism. It is found that the MFM signals have significant non-magnetic contributions due to capacitive and electrostatic interactions between the nanosheets and conductive cantilever tip, as demonstrated by electric force microscopy and scanning Kevin probe microscopy analyses. In addition, the MFM signals of graphene and MoS2 nanosheets are not responsive to reversed magnetic field of the magnetic cantilever tip. Therefore, the observed MFM response is mainly from electric artefacts and not compelling enough to correlate with magnetism of graphene and MoS2 nanosheets.

Boron nitride nanotubes : a novel vector for targeted magnetic drug delivery

Whereas several biomedical applications of carbon nanotubes have been proposed, the use of boron nitride nanotubes (BNNTs) in this field has been largely unexplored despite their unique and potentially useful properties. Our group has recently initiated an experimental program aimed at the exploration of the interactions between BNNTs and living cells. In the present paper, we report on the magnetic properties of BNNTs containing Fe catalysts which confirm the feasibility for their use as nanovectors for targeted drug delivery. The magnetisation curves of BNNTs characterised by the present study are typical of superparamagnetic materials with important parameters, including magnetic permeability and magnetic momentum, derived by employing Langevin theory. In-vitro tests have demonstrated the feasibility for influencing the uptake of BNNTs by living cells by exposure to an external magnetic source. A finite element method analysis devised to predict this effect produced predictive data with close agreement with the experimental observations.

Mechanical properties of graphene films enhanced by homo-telechelic functionalized polymer fillers via π-π Stacking interactions

© 2015 Elsevier Ltd. All rights reserved. Most researches on graphene/polymer composites are focusing on improving the mechanical and electrical properties of polymers at low graphene content instead of paying attention to constructing graphene's macroscopic structures. In current study the homo-telechelic functionalized polyethylene glycols (FPEGs) were tailored with π-orbital-rich groups (namely phenyl, pyrene and di-pyrene) via esterification reactions, which enhanced the interaction between polyethylene glycol (PEG) molecules and chemical reduced graphene oxide (RGO) sheets. The π-π stacking interactions between graphene sheets and π-orbital-rich groups endowed the composite films with enhanced tensile strength and tunable electrical conductivity. The formation of graphene network structure mediated by the FPEGs fillers via π-π stacking non-covalent interactions should account for the experimental results. The experimental investigations were also complemented with theoretical calculation using a density functional theory. Atomic force microscope (AFM), scanning electron microscope (SEM), X-ray diffraction (XRD), nuclear magnetic resonance (NMR), thermal gravimetric analysis (TGA), UV-vis and fluorescence spectroscopy were used to monitor the step-wise preparation of graphene composite films.

Cerebral responses to innocuous somatic pressure stimulation following aerobic exercise rehabilitation in chronic pain patients: a functional magnetic resonance imaging study

Objective: The purpose of this research was to assess the functional brain activity and perceptual rating of innocuous somatic pressure stimulation before and after exercise rehabilitation in patients with chronic pain.

Materials and methods: Eleven chronic pain patients and eight healthy pain-free controls completed 12 weeks of supervised aerobic exercise intervention. Perceptual rating of standardized somatic pressure stimulation (2 kg) on the right anterior mid-thigh and brain responses during functional magnetic resonance imaging (fMRI) were assessed at pre- and postexercise rehabilitation.

Results: There was a significant difference in the perceptual rating of innocuous somatic pressure stimulation between the chronic pain and control groups (P=0.02) but no difference following exercise rehabilitation. Whole brain voxel-wise analysis with correction for multiple comparisons revealed trends for differences in fMRI responses between the chronic pain and control groups in the superior temporal gyrus (chronic pain > control, corrected P=0.30), thalamus, and caudate (control > chronic, corrected P=0.23). Repeated measures of the regions of interest (5 mm radius) for blood oxygen level-dependent signal response revealed trend differences for superior temporal gyrus (P=0.06), thalamus (P=0.04), and caudate (P=0.21). Group-by-time interactions revealed trend differences in the caudate (P=0.10) and superior temporal gyrus (P=0.29).

Conclusion: Augmented perceptual and brain responses to innocuous somatic pressure stimulation were shown in the chronic pain group compared to the control group; however, 12-weeks of exercise rehabilitation did not significantly attenuate these responses.

Removal of Pb (II) ions using polymer based graphene oxide magnetic nano-sorbent

Graphene oxide (GO) based magnetic nano-sorbent was synthesized by assembling the Fe3O4 and GO on the surface of polystyrene (denoted as PS@Fe3O4@GO). The morphology of the nano-sorbent was studied using scanning electron microscopy (SEM), while their individual nano-components were characterized using UV-visible spectroscopy, atomic force microscopy (AFM), zeta potential, transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The assembled nano-sorbent was further investigated for Pb (II) ions removal by optimizing the parameters including pH, temperature and contact time. The obtained data was modelled for adsorption kinetics, adsorption isotherms and thermodynamics. Kinetic experiments indicated the Pb (II) adsorption followed first order kinetics. The adsorption equilibrium data fits Langmuir isotherm model well and the adsorption process was found to be spontaneous. The adsorption capacity of the prepared nano-sorbent was estimated to be 73.52mgg-1, with a maximum removal of 93.78% at pH 6. The nano-sorbent can be regenerated by nitric acid (HNO3) for reuse. FT-IR and X-ray photoelectron spectroscopy (XPS) studies confirmed the interactions between the Pb (II) ions and the nano-sorbent.

Bimodal magneto-luminescent dysprosium (DyIII)-potassium (KI)-oxalate framework: magnetic switchability with high anisotropic barrier and solvent sensing

We report synthesis, characterization, and properties of a multifunctional oxalate framework, {KDy(C₂O₄)₂(H₂O)₄}_n (1) (C₂O₄^2- = oxalate dianion) composed of two absolutely different metal ions in terms of their size, charge, and electronic configuration. Dehydrated framework (1′) exhibits permanent porosity and interesting solvent (H₂O, MeOH, CH₃CN, and EtOH) vapor sorption characteristics based on specific interactions with unsaturated alkali metal sites on the pore surface. Compound 1 shows solvent responsive bimodal magnetic and luminescence properties related to the DyIII center. Compound 1 exhibits reversible ferromagnetic to antiferromagnetric phase transition upon dehydration and rehydration, hitherto unknown for any lanthanide based coordination polymer or metal-organic frameworks. Both the compounds 1 and 1′ exhibit slow magnetic relaxation with very high anisotropic barrier (417 ± 9 K for 1 and 418 ± 7 K for 1′) which has been ascribed to the single ion magnetic anisotropy of the Dy^III centers. Nevertheless, compound 1 shows a metal based luminescence property in the visible region and H₂O molecules exhibit the strongest quenching effect compared to other solvents MeOH, MeCN, and EtOH, evoking 1′ as a potential H₂O sensor.