Concerning the length of time slots for efficient gang scheduling

Applying gang scheduling can alleviate the blockade problem caused by exclusively used space-sharing strategies for parallel processing. However, the original form of gang scheduling is not practical as there are several fundamental problems associated with it. Recently many researchers have developed new strategies to alleviate some of these problems. Unfortunately, one important problem has not been so far seriously addressed, that is, how to set the length of time slots to obtain a good performance of gang scheduling. In this paper we present a strategy to deal with this important issue for efficient gang scheduling.

Concerning the length of time slots for efficient gang scheduling

Applying gang scheduling can alleviate the blockade problem caused by exclusively used space-sharing strategies for parallel processing. However, the original form of gang scheduling is not practical as there are several fundamental problems associated with it. Recently many researchers have developed new strategies to alleviate some of these problems. Unfortunately, one important problem has not been so far seriously addressed, that is, how to set the length of time slot to obtain a good performance of gang scheduling. With gang scheduling time is divided into time slots of equal length, the number of time slots introduced in the system forms a scheduling round and each new job is first allocated to a particular time slot and then starts to run in the following scheduling round. Ideally, the length of time slot should be set long to avoid frequent context switches and so to reduce the scheduling overhead. The number of time slots in a scheduling round should also be limited to avoid a large number of jobs competing for limited resources (CPU time and memory). Long time slots and the limited number of time slots in each scheduling round may cause jobs to wait for a long time before it can be executed after arrival, which can significantly affect the performance of jobs, especially short jobs which are normally expected to finish quickly. However, the performance of a short job can also suffer if the length of time slot is not long enough to let the short job complete in a single time slot. In this paper we present a strategy to deal with this important issue for efficient gang scheduling.

A solar collector with the absorber divided by rectangular slots

A new solar absorber structure has been proposed and studied in this paper. The metal tubes running perpendicular to a set of parallel rectangular metal fins make the solar absorber with rectangular slots. Studies on the collector were theoretically carried out in the aspects of heat transfer, thermodynamics and . hydrodynamics. The calculating methods for calculating fin efficiency F and efficiency factors of the collector F' were obtained. The results showed that the new solar collector would have the higher efficiency and better performance at higher fluid temperature than that of the traditional flat-plate collectors. A collector prototype with the new structure was built and tested. The testing results agree with our theoretical results.

Periodic variability in cetacean strandings: links to large-scale climate events

Cetacean strandings elicit much community and scientific interest, but few quantitative analyses have successfully identified environmental correlates to these phenomena. Data spanning 1920–2002, involving a total of 639 stranding events and 39 taxa groups from southeast Australia, were found to demonstrate a clear 11–13- year periodicity in the number of events through time. These data positively correlated with the regional persistence of both zonal (westerly) and meridional (southerly) winds, reflecting general long-term and large-scale shifts in sea-level pressure gradients. Periods of persistent zonal and meridional winds result in colder and presumably nutrient-rich waters being driven closer to southern Australia, resulting in increased biological activity in the water column during the spring months. These observations suggest that large-scale climatic events provide a powerful distal influence on the propensity for whales to strand in this region. These patterns provide a powerful quantitative framework for testing hypotheses regarding environmental links to strandings and provide managers with a potential predictive tool to prepare for years of peak stranding activity.

Anisotropic wetting characteristics on submicrometer-scale periodic grooved surface

Submicrometer-scale periodic structures consisting of parallel grooves were prepared on azobenzene-containing multiarm star polymer films by laser interference. The wetting characteristics on the patterned surfaces were studied by contact angle measurements. Macroscopic distortion of water drops was found on such small-scale surface structures, and the contact angles measured from the direction parallel to the grooves were larger than those measured from the perpendicular direction. A thermodynamic model was developed to calculate the change in the surface free energy as a function of the instantaneous contact angle when the three-phase contact line (TPCL) moves along the two orthogonal directions. It was found that the fluctuations, i.e., energy barriers, on the energy versus contact angle curves are crucial to the analysis of wetting anisotropy and contact angle hysteresis. The calculated advancing and receding contact angles from the energy versus contact angle curves were in good agreement with those measured experimentally. Furthermore, with the groove depth increasing, both the degree of wetting anisotropy and the contact angle hysteresis perpendicular to the grooves increased as a result of the increase in the energy barrier. The theoretical critical value of the groove depth, above which the anisotropic wetting appears, was determined to be 16 nm for the grooved surface with a wavelength of 396 nm. On the other hand, the effect of the groove wavelength on the contact angle hysteresis perpendicular to the grooves was also interpreted on the basis of the thermodynamic model. That is, with the wavelength decreasing, the contact angle hysteresis increased due to the increase in the number of energy barriers. These results may provide theoretical evidence for the design and application of anisotropic wetting surface.

Computational investigations on periodic trends in Group 14 chemistry

Describes the use of computer-aided molecular modelling to investigate trends in the chemistry of the Group 14 elements, namely carbon, silicon, germanium, tin and lead. The chemical behaviour of two classes of molecules containing Group 14 elements was related to trends in the fundamental properties of these elements.

Modeling and simulation of a periodic grating coupled configuration for surface plasmon excitation

The deficiencies in the design of surface plasmon resonance (SPR) systems that are reported in numerous published works consistently identify the optics assembly as the main problem in the miniaturization of SPR sensors for integration into biosensor systems. This paper presents a novel design of a grating coupled optical waveguide surface plasmon (SP) excitation mechanism, investigated with the intention of addressing the problems associated with using the traditional prism input-output light coupling approach. Computational multiphysics modeling and simulation of the design is carried out. The results are presented and discussed.

Use of log polar space for foveation and feature recognition

The finding and maintaining of high accuracy foveation points for several types of recognised feature in log polar space such as a line, circular or elliptical arc is considered. Log polar space is preferred over cartesian space as it provides a high resolution and a wide viewing angle; feature invariance in the fovea simplifies foveation; it allows multi-resolution analysis; and rotation and scale are linear translations in log polar space.

Human saccadic eye movements and tracking by active foveation in log polar space

One of the possible models of the human visual system (HVS) in the computer vision literature has a high resolution fovea and exponentially decreasing resolution periphery. The high resolution fovea is used to extract necessary information in order to solve a vision task and the periphery may be used to detect motion. To obtain the desired information, the fovea is guided by the contents of the scene and other knowledge to position the fovea over areas of interest. These eye movements are called saccades and corrective saccades. A two stage process has been implemented as a mechanism for changing foveation in log polar space. Initially, the open loop stage roughly foveates on the best interest feature and then the closed loop stage is invoked to accurately iteratively converge onto the foveation point. The open loop stage developed for the foveation algorithm is applied to saccadic eye movements and a tracking system. Log polar space is preferred over Cartesian space as: (1) it simultaneously provides high resolution and a wide viewing angle; and (2) feature invariance occurs in the fovea which simplifies the foveation process.

Faster and parameter-free discord search in quasi-periodic time series

Time series discord has proven to be a useful concept for time-series anomaly identification. To search for discords, various algorithms have been developed. Most of these algorithms rely on pre-building an index (such as a trie) for subsequences. Users of these algorithms are typically required to choose optimal values for word-length and/or alphabet-size parameters of the index, which are not intuitive. In this paper, we propose an algorithm to directly search for the top-K discords, without the requirement of building an index or tuning external parameters. The algorithm exploits quasi-periodicity present in many time series. For quasi-periodic time series, the algorithm gains significant speedup by reducing the number of calls to the distance function.