Fitting aggregation functions to data: part I-linearization and regularization

The use of supervised learning techniques for fitting weights and/or generator functions of weighted quasi-arithmetic means – a special class of idempotent and nondecreasing aggregation functions – to empirical data has already been considered in a number of papers. Nevertheless, there are still some important issues that have not been discussed in the literature yet. In the first part of this two-part contribution we deal with the concept of regularization, a quite standard technique from machine learning applied so as to increase the fit quality on test and validation data samples. Due to the constraints on the weighting vector, it turns out that quite different methods can be used in the current framework, as compared to regression models. Moreover, it is worth noting that so far fitting weighted quasi-arithmetic means to empirical data has only been performed approximately, via the so-called linearization technique. In this paper we consider exact solutions to such special optimization tasks and indicate cases where linearization leads to much worse solutions.

Drying front in a sloping aquifier: nonlinear effects

The profiles for the water table height h(x, t) in a shallow sloping aquifer are reexamined with a solution of the nonlinear Boussinesq equation. We demonstrate that the previous anomaly first reported by Brutsaert [1994] that the point at which the water table h first becomes zero at x = L at time t = t c remains fixed at this point for all times t > t c is actually a result of the linearization of the Boussinesq equation and not, as previously suggested [ Brutsaert, 1994 ; Verhoest and Troch, 2000 ], a result of the Dupuit assumption. Rather, by examination of the nonlinear Boussinesq equation the drying front, i.e., the point x f at which h is zero for times t ≥ t c , actually recedes downslope as physically expected. This points out that the linear Boussinesq equation should be used carefully when a zero depth is obtained as the concept of an “average” depth loses meaning at that time.

Nonlinear identification of pneumatic servo-drive

Three nonlinear approaches to model the nonlinear pneumatic servo- drive are presented. The three nonlinear approaches are: (1) the multi input-single output (MISO) approach, which describes the single input-single output (SISO) nonlinear plant using a MISO linear representation which allows replacement of the nonlinear analysis by a linear one without approximation, and is studied in both time and frequency domains; (2) piecewise linearization, which systematically replaces, using artificial neural network, the nonlinear surface representing the plant in the hyper input-output space by a number of linear planes that are continuous over the boundaries between them; and (3) Adaptive Neuro-Fuzzy Inference System (ANFIS), in which the fuzzy rules are placed in a neural network structure, and which consequently utilizes neural networks learning rules to systematically tune the nonlinear fuzzy model. The superiority of these nonlinear models over the best model that can be developed using linear identification techniques is shown.

Identification of nonlinear systems using hybrid functions

Most real systems have nonlinear behavior and thus model linearization may not produce an accurate representation of them. This paper presents a method based on hybrid functions to identify the parameters of nonlinear real systems. A hybrid function is a combination of two groups of orthogonal functions: piecewise orthogonal functions (e.g. Block-Pulse) and continuous orthogonal functions (e.g. Legendre polynomials). These functions are completed with an operational matrix of integration and a product matrix. Therefore, it is possible to convert nonlinear differential and integration equations into algebraic equations. After mathematical manipulation, the unknown linear and nonlinear parameters are identified. As an example, a mechanical system with single degree of freedom is simulated using the proposed method and the results are compared against those of an existing approach.

Navigation of four-wheel-steering mobile robots using robust fault-tolerant sliding mode control

This paper addresses the leader-follower tracking problem of a four-wheel-steering robot subjected to nonlinear uncertainties. Two control laws have been developed, based on the adaptive sliding mode method and the adaptive input-output feedback linearization method. The proposed control schemes have been tested by means of simulations.

Robust nonlinear distributed controller design for active and reactive power sharing in islanded microgrids

This paper presents a robust nonlinear distributed controller design for islanded operation of microgrids in order to maintain active and reactive power balance. In this paper, microgrids are considered as inverter-dominated networks integrated with renewable energy sources (RESs) and battery energy storage systems (BESSs), where solar photovoltaic generators act as RESs and plug-in hybrid electric vehicles as BESSs to supply power into the grid. The proposed controller is designed by using partial feedback linearization and the robustness of this control scheme is ensured by considering structured uncertainties within the RESs and BESSs. An approach for modeling the uncertainties through the satisfaction of matching conditions is also provided in this paper. The proposed distributed control scheme requires information from local and neighboring generators to communicate with each other and the communication among RESs, BESSs, and control centers is developed by using the concept of the graph theory. Finally, the performance of the proposed robust controller is demonstrated on a test microgrid and simulation results indicate the superiority of the proposed scheme under different operating conditions as compared to a linear-quadratic-regulator-based controller.

Robust nonlinear controller design for three-phase grid-connected photovoltaic systems under structured uncertainties

This paper presents a robust nonlinear controller design for a three-phase grid-connected photovoltaic (PV) system to control the current injected into the grid and the dc-link voltage for extracting maximum power from PV units. The controller is designed based on the partial feedback linearization approach, and the robustness of the proposed control scheme is ensured by considering structured uncertainties within the PV system model. An approach for modeling the uncertainties through the satisfaction of matching conditions is provided. The superiority of the proposed robust controller is demonstrated on a test system through simulation results under different system contingencies along with changes in atmospheric conditions. From the simulation results, it is evident that the robust controller provides excellent performance under various operating conditions. © 2014 IEEE.

Energy minimization in multi-task software-defined sensor networks

Abstract—
After a decade of extensive research on application-specific wireless sensor networks (WSNs), the recent development of information and communication technologies makes it practical to realize the software-defined sensor networks (SDSNs), which are able to adapt to various application requirements and to fully explore the resources of WSNs. A sensor node in SDSN is able to conduct multiple tasks with different sensing targets simultaneously. A given sensing task usually involves multiple sensors to achieve a certain quality-of-sensing, e.g., coverage ratio. It is significant to design an energy-efficient sensor scheduling and management strategy with guaranteed quality-of-sensing for all tasks. To this end, three issues are investigated in this paper: 1) the subset of sensor nodes that shall be activated, i.e., sensor activation, 2) the task that each sensor node shall be assigned, i.e., task mapping, and 3) the sampling rate on a sensor for a target, i.e., sensing scheduling. They are jointly considered and formulated as a mixed-integer with quadratic constraints programming (MIQP) problem, which is then reformulated into a mixed-integer linear programming (MILP) formulation with low computation complexity via linearization. To deal with dynamic events such as sensor node participation and departure, during SDSN operations, an efficient online algorithm using local optimization is developed. Simulation results show that our proposed online algorithm approaches the globally optimized network energy efficiency with much lower rescheduling time and control overhead.

Lingo: linearized grassmannian optimization for nuclear norm minimization

As a popular heuristic to the matrix rank minimization problem, nuclear norm minimization attracts intensive research attentions. Matrix factorization based algorithms can reduce the expensive computation cost of SVD for nuclear norm minimization. However, most matrix factorization based algorithms fail to provide the theoretical guarantee for convergence caused by their non-unique factorizations. This paper proposes an efficient and accurate Linearized Grass-mannian Optimization (Lingo) algorithm, which adopts matrix factorization and Grassmann manifold structure to alternatively minimize the subproblems. More specially, linearization strategy makes the auxiliary variables unnecessary and guarantees the close-form solution for low periteration complexity. Lingo then converts linearized objective function into a nuclear norm minimization over Grass-mannian manifold, which could remedy the non-unique of solution for the low-rank matrix factorization. Extensive comparison experiments demonstrate the accuracy and efficiency of Lingo algorithm. The global convergence of Lingo is guaranteed with theoretical proof, which also verifies the effectiveness of Lingo.

Nonlinear controller design for vehicle-to-grid systems with output LCL filters

This paper presents a nonlinear controller design for vehicle-to-grid (V2G) systems with LCL output filters. The V2G systems are modeled with LCL output filters in order to eliminate harmonics for improving power qualities and the nonlinear controller is designed based on the feedback linearization. The feasibility of using the appropriate feedback linearization approaches, either partial or exact, is also investigated through the feedback linearizability of V2G systems. In this paper, partial feedback linearization is used to design the controller with a capability of sharing both active and reactive power in V2G systems. The performance of the proposed controller controller is evaluated on a single-phase full-bridge converter-based V2G system with an LCL output filter and compared to that of without any filter. Simulation results clearly demonstrate the harmonic elimination capabilities of the proposed V2G structure with the proposed control scheme.

An alternative LQR-based excitation controller design for power systems to enhance small-signal stability

This paper presents a new approach to design excitation controller for power systems to enhance small-signal stability. Partial feedback linearization scheme is used to design the controller for a linearized power system model which transforms a part of this model into a new system through linear coordinate transformation. In this paper, the excitation control law as a function of state variables is determined from the dynamics of the partly transformed new system provided that the controller stabilizes the remaining dynamics of the system which are not transformed through feedback linearization. The stability of the remaining dynamics is also discussed in this paper. Since the proposed control scheme uses state variables as feedback, it is analogous to a linear quadratic regulator (LQR) based excitation controller. Therefore, the performance of the proposed scheme is evaluated on a single machine infinite bus (SMIB) system and compared to that of an LQR controller.

Robust partial feedback linearizing excitation controller design for multimachine power systems

This paper presents a new robust nonlinear excitationcontroller design for synchronous generators in multimachine powersystems to enhance the transient stability. The mismatches betweenthe original power system model and formulated mathematical modelare considered as uncertainties which are modeled through thesatisfaction of matching conditions. The exogenous noises appearingfrom measurements are incorporated with the power system modelincluding the two-axis model of synchronous generators. The partialfeedback linearization technique is used to design the controller whichtransforms the original nonlinear multimachine power system modelinto several reduced-order linear and autonomous subsystems. Thedesired control law is obtained for each subsystem and implemented ina decentralized manner provided that the dynamics of the autonomoussubsystems have no effects on the overall stability of the system. Theanalysis related to the dynamics of noisy autonomous subsystems isalso included and the proposed controller has the excellent capabilityto decouple these noises. Finally, the performance of the proposedcontrol scheme is evaluated on an IEEE 39-bus benchmark powersystem following different types of large disturbances. The performanceof the proposed controller is compared to that of a partialfeedback linearizing controller, which is designed without robustnessproperties, to verify the effectiveness of the proposed control scheme.

Transient stability enhancement of multimachine power systems using nonlinear observer-based excitation controller

This paper presents an approach to design a nonlinear observer-based excitation controller for multimachine power systems to enhance the transient stability. The controller is designed based on the partial feedback linearization of a nonlinear power system model which transforms the model into a reducedorder linear one with an autonomous dynamical part. Then a linear state feedback stabilizing controller is designed for the reduced-order linear power system model using optimal control theory which enhances the stability of the entire system. The states of the feedback stabilizing controller are obtained from the nonlinear observer and the performance of this observer-based controller is independent of the operating points of power systems. The performance of the proposed observer-based controller is compared to that of an exact feedback linearizing observer-based controller and a partial feedback linearizing controller without observer under different operating conditions.

Nonlinear DSTATCOM controller design for distribution network with distributed generation to enhance voltage stability

This paper presents a nonlinear controller design for a DSTATCOM connected to a distribution network with distributed generation (DG) to regulate the line voltage by providing reactive power compensation.The controller is designed based on the partial feedback linearization which transforms the nonlinear system into a reduced-order linear system and an autonomous system whose dynamics are known as internal dynamics of the system. This paper also investigates the stability of internal dynamics of a DSTATCOM as it is a basic requirement to design partial feedback linearizing controllers. The performance of the proposed controller is evaluated in terms reactive power compensation to enhance the voltage stability of distribution with DG.