Assessment of delamination in composite beams using shear horizontal (SH) wave mode

Interaction of Lamb waves with structural damage can lead to wave mode conversion. In this study, the shear horizontal (SH) wave, from the mode conversion of the fundamental symmetric Lamb wave (S0), was used for quantitative identification of delamination in composite beams, based on advanced signal processing using an inverse approach. SH wave propagation under various delamination conditions in CF/EP beams made of orthotropic plain woven fabrics was simulated, and signal characteristics were extracted in terms of the concept of digital damage fingerprints (DDF). With the aid of an artificial neural algorithm, the relation between the DDF of delamination-scattered SH mode and damage parameters was calibrated, whereby the occurrence, location and size of delamination in the composite beams were assessed. The approach was experimentally validated, and the results demonstrate the effectiveness of SH mode for quantitative damage evaluation of composite structures.

Sudden drawdown and drainage of a horizontal aquifer

Drainage of a saturated horizontal aquifer following a sudden drawdown is reanalyzed using the Boussinesq equation. The effect of the finite length of the aquifer is considered in detail. An analytical approximation based on a superposition principle yields a very good estimate of the outflow when compared to accurate numerical solutions. An illustration of the new analytical approach to analyze basin-scale field data is used to demonstrate possible field applications of the new solution.

Modelling the diffuse fraction of global solar radiation on a horizontal surface

For various applications it is necessary to know not only global solar radiation values, but also the diffuse and beam components. Because often only global values are available, there have been several models developed to establish correlations between the diffuse fraction and various predictors. These typically include the clearness index, but also may include the solar angle, temperature and humidity. The clearness index is the proportion of extraterrestrial radiation reaching a location, where the extraterrestrial value used in the calculation varies with latitude and time of year. These correlations have been developed using data principally from latitudes greater than 40°, often using only data from a few locations and with few exceptions have not used solar altitude as a predictor. Generally the data consist of hourly integrated values. A model has been developed using hourly data from a weather station set up at Deakin University, Geelong. Another model has also been developed for 15 minute data values in order to ascertain if the smoothing generated by using hourly data makes a significant difference to overall results. The construction of such models has been investigated, enabling an extension to the research, inclusive of other stations, to be performed systematically. A final investigation was carried out, using data from other Australian locations, to explain some of the considerable scatter by adding apparent solar time as a predictor, which proved to be significantly better than solar altitude.

Conversion of the hot torsion test results into flow curve with multiple regimes of hardening

The method of Fields and Backofen has been commonly used to reduce the data obtained by hot torsion test into flow curves. The method, however, is most suitable for materials with monotonic strain hardening behaviour. Other methods such as Stüwe’s method, tubular specimens, differential testing and the inverse method, each suffer from similar drawbacks. It is shown in the current work that for materials with multiple regimes of hardening any method based on an assumption of constant hardening indices introduces some errors into the flow curve obtained from the hot torsion test. Therefore such methods do not enable accurate prediction of onset of recrystallisation where slow softening occurs. A new method to convert results from the hot torsion test into flow curves by taking into account the variation of constitutive parameters during deformation is presented. The method represents the torque twist data by a parametric linear least square model in which Euler and hyperbolic coefficients are used as the parameters. A closed form relationship obtained from the mathematical representation of the data is employed next for flow stress determination. Two different solution strategies, the method of normal equations and singular value decomposition, were used for parametric modelling of the data with hyperbolic basis functions. The performance of both methods is compared. Experimental data obtained by FHTTM, a flexible hot torsion test machine developed at IROST, for a C–Mn austenitic steel was used to demonstrate the method. The results were compared with those obtained using constant strain and strain rate hardening characteristics.

Determination of plastic yield stress from spherical indentation slope curve

The indentation slope curve from a spherical indentation on elastic-plastic materials is examined. By comparing it with that of an linear elastic material of the same elastic properties, we found that the start point of plastic yielding for an elastic-plastic material can be easily located from the indentation slope curve. Based on this analysis, a simple but effective method is proposed to measure the plastic yield stress of very small samples from a spherical nano-indentation slope curve.

New Zealand’s trade balance : evidence of the J-curve and granger causality

This article tests for the existence of any cointegration relationship between trade balance and real effective exchange rate (REER), foreign income and domestic income for New Zealand during the period 1970-2000. It also examines the direction of the casual relationship between the above variables, and applies the impulse response analysis to determine whether shocks to the REER induce the trade balance to follow a J-curve pattern. The results indicate that there is no cointegration relationship between the above variables; there is a casual connection in both directions between trade balance and foreign income; and New Zealand's trade balance exhibits a J-curve pattern when there is a depreciation of the New Zealand dollar.

The J-curve : evidence from Fiji

This article provides new evidence on both long run and short-run determinants of trade balance for Fiji and investigates evidence of J-curve adjustment behaviour in the aftermath of a devaluation. We adopt a partial reduced form model that models the real trade balance directly as a function of the real exchange rate and real domestic and foreign incomes. Cointegration analysis is based on a recently developed autoregressive distributed lag approach—shown to provide robust results in finite samples. The long run elasticities are also estimated using a dynamic ordinary least squares approach and the Fully Modified Ordinary Least Squares (FM-OLS) approach. Amongst our key results we find that there is a long-run relationship between trade balance and its determinants. There is evidence of the J-curve pattern; growth in domestic income affects Fiji's trade balance adversely while foreign income improves it.

Diagnosis of {alpha}+-thalassemias by determining the ratio of the two {alpha}-globin gene copies by oligonucleotide hybridization and melting curve analysis

Most cases of {alpha}-thalassemia result from large deletions at the {alpha}-globin locus (1). The {alpha}-globin gene cluster contains a tandem array of 2 nearly identical {alpha}-globin genes (HBA; Fig. 1A ) (2). The {alpha}0-thalassemias are characterized by deletions that inactivate both {alpha}-globin genes of a given chromosome, whereas in {alpha}+-thalassemias, one gene remains functional. The most widespread {alpha}+-thalassemias are those designated –{alpha}3.7 and –{alpha}4.2, according to the lengths of the deleted fragments (3).

Enhancing horizontal integration in integrated coastal zone management

The thesis explores the challenges of horizontal integration across inland catchments and the coastal zone. It presents a framework demonstrating the relationship between five factors which influence horizontal integration. From this relationship it devises a set of four implementation phases for enhancing horizontal integration across catchments and the coastal zone.

Evaluating the performance of horizontal subsurface flow constructed wetlands using natural zeolite (escott)

The objective of the present study was to assess the simultaneous removal of physiochemical parameters in moderate strength wastewater using a lab scale horizontal subsurface flow constructed wetland (HFCW) with natural zeolite as a substrate. In this study, high-density polyethylene tanks (0.36 m²) were planted with phragmites australis and scirpus maritimus and received 0.012 m³/d to 0.08 m³/d of synthetic wastewater corresponding to a HLR of 0.035 to 0.243 m/d and a COD loading rate of 0.0148 kg COD (m².d)^-1 to 0.026 kg COD (m².d)^-1. The HFCW was subjected to three hydraulic retention times (HRT) for 4, 3 and 2 days respectively. Averaged data reported coincided with the plant age (4 to 55 weeks) and covered the entire cold season and early part of the hot season. Based on the 55 weeks of operation, the HFCW unit with zeolite achieved significantly higher removal for COD (85 to 88%), TN (54 to 96%), NH₄-N (50 to 99%) and TSS (91 to 96%) respectively at all HRT. This system was proved to be tolerant to high organic loadings and nutrients, suggesting these substrates as viable options for biological treatment of wastewater.

Evaluating the performance of different media in a horizontal subsurface flow constructed wetland

The treatment efficiency of a wetland system requires a balance between pollutant loading rate and hydraulic retention time (HRT), hydraulic loading rate (HLR) and the suitable substrate to be used. The aim of this study was to investigate the treatment efficiency of horizontal subsurface flow constructed wetland planted with phragmites australis and scirpus maritimus containing three different substrates to treat agricultural wastewater under short term operation. Alum sludge and zeolite were used as substrates and gravel was used as a control for a laboratory-scale horizontal flow constructed wetland (CW) units that were made of high-density Polyethylene. The units were operated under 2, 3 and 4 days of HRTs and at different HLR for each substrate. Each beds received 0.012 m3/d to 0.08 m3/d of synthetic wastewater corresponding to a HLR of 0.035 to 0.243 m/d and a COD loading rate of 0.0148 kg COD (m2.d)-1 to 0.026 kg COD (m2.d)-1. The relationships between the substrate, retention time and removal efficiency, especially of organic matter and nutrient removal were investigated. All units showed relatively stable removal for COD during the entire operational period. The COD removal for all units and HRT were in ranged from 67% to 93%. The zeolite unit achieved significantly higher removal of TN, NH4-N and TSS compared to alum sludge and gravel unit at all HRT. The unit with zeolite was highly effective in removing TN (54 to 96%), NH4-N (50 to 99%) and TSS (91 to 96%) respectively, at 2, 3 and 4 days of HRT. Meanwhile, alum sludge was highly effective in removing phosphate. The removal of phosphate from alum sludge unit was ranged from 94 to 97% for all HRT. Compared to gravel CW unit, zeolite and alum sludge CW were proved to be tolerant to high organic loadings and nutrients, suggesting these substrates as viable options for biological treatment of agricultural wastewater.