Interaction between the coating characteristics of galvanneal steel and forming parameters during flat die drawing

Galvanneal steel is considered to be better for automotive applications than its counterpart, galvanized steel, mainly because of its superior coating and surface properties. Galvanneal steel is produced by hot dipping sheet steel in a bath of molten zinc with small, controlled, levels of aluminium, followed by annealing which creates a Fe-Zn intermetallic layer. This intermetallic layer of the coating improves spot weldability and improves subsequent paint appearance. However, if the microstructure of the coating is not properly controlled and forming parameters are not properly selected, wear of the coating could occur during stamping. Frictional sliding of the sheet between the tool surfaces results in considerable amount of coating loss. An Interstitial Free steel with a Galvanneal coating of nominally 60g/m2 was used for the laboratory experiments. Flat Face Friction (FFF) tests were performed with different forming conditions and lubricants to simulate the frictional sliding in stamping. Glow-Discharge Optical Emission Spectrometry (DG-OES) was used to measure the change in the coating thickness during sliding. Optical microscopy was considered for imaging the surfaces as well as an optical method to compare the changes in the coating thickness during the forming. The change to the Galvanneal coating thickness was found to be a function of forming parameters.

Photocatalytic decolorization of lanasol blue CE dye solution using a flat-plate reactor

This paper reports the effectiveness of the photocatalysis TiO₂ in degrading Lanasol Blue CE. A flat-plate reactor (FPR) with a reactor area of 0.37 m² and ultraviolet (UV) light source of six 36 W blacklight lamps was used in the study. Operating variables including dosage of the photocatalyst, flow rates through the FPR, UV intensity, and tilted angle of the reactor were investigated to degrade Lanasol Blue CE. Results showed that the photocatalytic process can efficiently remove the color in textile dyeing effluent. The degradation process was approximated using first-order kinetics. The photocatalytic apparent reaction rate increased with the increasing UV intensity received by the photocatalyst TiO₂ in slurry. The liquid flow rate and tilted angle influenced the film thickness. The apparent reaction rate constant was mainly determined by the liquid film thickness, UV intensity, and the dosage of the photocatalyst. The findings of this research can be utilized as preliminary input for potential solar photocatalytic applications on color removal from dye solutions.

Photocatalytic degradation of dyes in wastewater using TiO2/UV in a flat-plate reactor

The photocatalyst TiO₂ with UV irradiation was used to degrade dyes in textile effluent in a flat-plate photoreactor. A test system was built with the reactor area of 1 x 0.3m2, UV light of six 36W-blacklight. TiO₂ powder P25 with BET surface area 50±15m2/g, average primary particle size 21 nm, purity> 99.5% and content of 83.9% anatase and 16.1 % rutile was used as the photocatalyst. A number of dyes commonly present in dyeing wastewater were tested in this study. The different operating parameters, such as dosage of photocatalyst, the structure of the reactor, flow rates through the flat-plate reactor, UV radiation intensity and tilted angle of the reactor, were investigated. The results showed that the photocatalytic process could efficiently remove most of the colour contained in the dyeing wastewater. It was experimentally observed that first-order kinetics was adequate for characterising the process. The flow rate and the tilted angle had some influence on the film thickness of the fluid in the reactor and the empirical correlation between the film thickness of the fluid and these two parameters was developed. The photoreaction rate was mainly determined by the film thickness of the fluid on the reactor surface and the dosage of the photocatalyst. Optimum operating parameters of the system were found to be at the film thickness of about 1.4mm and a TiO₂ dosage of 1 gIL. The higher the UV intensity, the faster the reaction rate was. The results of these experiments showed that this method has the great potential for colour removal from wastewater at commercial scale.

To overcome the common difficulty of separating the used TiO₂ suspension after treatment precipitation followed with filtration was used in this study to determine the separation efficiencies. On the other hand, TiO₂ in a small pillar shape was also studied for photocatalytic degradation of textile dye effluent. The pillar pellet was made in Oegussa Company, Germany ranging from 2.5 to 5.3mm long and with a diameter of 3.7mm. It was almost pure TiO₂ (83.2% anatase and 16.8% rutile), with a S-content of <20 ppm and a CI content of the order of 0.1 wt. %. No further elements are present in contents above 0.05 wt.%. The TiO₂ pillars were placed on the flat-plate reactor that was divided by the rectangular slots and irradiated under UV light when the treated solution went through the reactor. Four dyes and their mixtures were tested. The results showed that the photocatalytic process under this configuration efficiently remove the colour from textile dyeing effluent, and pillar shape TiO₂ photocatalyst was not dissolved in water and very easy to be separated from solution, enabling it to be reused many times. The first-order kinetics was adequate for characterising the photocatalytic degradation process and the photocatalytic performance was comparable to TiO₂ powder. It is believed that the TiO₂ pellet would be a preferable form of photocatalyst in applications for textile effluent treatment process, and other wastewater treatment processes.

Solar photocatalytic oxidation (PCO) process with a flat-plate reactor

An experimental rig with a flat-plate solar reactor was built to study the effectiveness of degradation using the reactive methylene blue as sensitive objective. The factors that affect the degradation performance, such as dosages of photocatalyst (Ti0₂), initial concentration of reactive methylene blue, flow rate through the flat-plate reactor, solar UV radiation intensity and decolourising efficiency of the solution, have been investigated. The results showed that the solar PCO process with a Flat-plate Reactor could degrade the methylene blue and decolour in methylene blue solution efficiently.

So flat, so cute! Robots, superflatness and asian architectural futures

Many depictions of urban futures have a distinctly Asian flavour. There have been numerous visions of highly technological futures whose environments extrapolate present societies into futures technically, culturally and politically dominated by China or Japan, Such futures are portrayed as both exciting and threatening, to the point that the Japanese academic and cultural critic Toshiya Ueno used the term ‘Techno-Orientalism’ to describe the phenomenon. Nevertheless, whether Western interest is Orientalist or not, Asian architects are also increasingly looking to their own contemporary and future cultures for inspiration. This paper will discuss two manifestations of this. The first is Thai architect Sumet Jumsai’s Bank of Asia. Unlike contemporaneous English hightech buildings, with their coldly mechanistic representation of ducts and struts, Jumsai’s Bank of Asia, takes on the anthropomorphic character of Japanese scifi robots. It is endearing, friendly, even cute. The second example is what might be termed superflat architecture, from the term coined by the artist Takashi Murakami to describe an aesthetic of intrinsic flatness, eliminating depth in favour of skin and surface. The emergence of Techno-Cute and Superflat architecture suggest contemporary Asian architectural sensibilities that neither derive their aesthetic qualities solely from tradition nor from Western Modernism or Postmodernism.

Repeatable sediment associations of burrowing bivalves across six European tidal flat systems

Burrowing bivalves are associated with particular sediment types within sedimentary systems. The degree to which bivalve sediment associations are repeatable across systems has seldom been investigated. To investigate whether such repeatability exists across tidal flats, we compared adult and juvenile distributions of 3 bivalve species (Cerastoderma edule, Scrobicularia plana, Macoma balthica) across 6 European tidal flats. Across systems, the adult bivalves showed fairly repeatable distributions, with C. edule occurring in sandy sediments and M. balthica and S. plana occurring in muddy sediments. Exceptions were observed in systems composed primarily of muddy sediments (Aiguillon Bay and Marennes-Oléron Bay) and the Dutch Wadden Sea. Interestingly, juveniles and adults of C. edule and S. plana showed similar distributions across systems. M. balthica juveniles and adults showed habitat separation in 3 of the 6 studied systems; in 2 of these, it has been shown previously that juvenile M. balthica settle in mud at high tidal levels and migrate to lower sandier flats later in life. The high occurrence of juvenile M. balthica towards high sandy flats in Mont Saint-Michel Bay suggests that juveniles might choose high tidal flats rather than muddy sediments per se. A repeatable association in adults and juveniles with respect to sediment could suggest that juveniles actively settle in the proximity of the adults and/or that juveniles settling away from the adults incur a higher mortality due to either predation, physiological stress, or other factors.

The influence of surface forces on thin film drainage between a fluid drop and a flat solid

An experiment is described in which a mica surface is driven towards a mercury drop immersed in aqueous electrolyte. Under appropriate conditions, hydrodynamic pressure in the aqueous film creates a classical dimple in the mercury drop. The use of optical interferometry and video recording to monitor the shape of the drop and the thickness of the aqueous film with sub-nanometre resolution yields a high density of precise data showing the formation and evolution of the dimple as the film drains. Variation of electrical potential applied to the mercury phase allows control of the surface forces acting between the drop and the mica surface, so that the effect of surface forces on the film drainage process is highlighted. It is found that the film thickness at the centre of the dimple and the lateral extent of the dimple are not significantly affected by surface forces. On the other hand, the minimum film thickness at the edge of the dimple is sensitive even to weak surface forces. Since this minimum film thickness is a major determinant of the film drainage rate, it is shown that surface forces have an important effect on the overall drainage process.

How honeybees make grazing landings on flat surfaces

Freely flying bees were filmed as they landed on a flat, horizontal surface, to investigate the underlying visuomotor control strategies. The results reveal that (1) landing bees approach the surface at a relatively shallow descent angle; (2) they tend to hold the angular velocity of the image of the surface constant as they approach it; and (3) the instantaneous speed of descent is proportional to the instantaneous forward speed. These characteristics reflect a surprisingly simple and effective strategy for achieving a smooth landing, by which the forward and descent speeds are automatically reduced as the surface is approached and are both close to zero at touchdown. No explicit knowledge of flight speed or height above the ground is necessary. A model of the control scheme is developed and its predictions are verified. It is also shown that, during landing, the bee decelerates continuously and in such a way as to keep the projected time to touchdown constant as the surface is approached. The feasibility of this landing strategy is demonstrated by implementation in a robotic gantry equipped with vision.

The langauge of tourism : perfecting soft skills in a flat world

India is Australia's 11th-biggest inbound tourism market, bringing in 148,200 visitors who spent $867 million last year, but by 2020 officials say that could reach 300,000 visitors spending $2.3 billion.
Delhi and Mumbai have been targeted by Australia because they have an emerging middle class and India's highest concentration of affluent households.
The Minister for Tourism, Martin Ferguson, unveiled an India 2020 strategic plan last month at the annual Australian Tourism Exchange in Perth, the largest travel trade show in the southern hemisphere. "We have put a huge effort into attracting tourists from China recently and the next cab off the rank is India," he said.
The plan means that Tourism Australia's "There's Nothing Like Australia" campaign will be rolled out in Delhi and Mumbai and there will be extensive advertising on TV and digital channels as well as print.

Synchronous Objects for One Flat Thing, reproduced

Synchronous Objects is a website where a visitor/ reader can investigate the interlocking systems of organisation in the choreography of William Forsythe's dance One Flat Thing, reproduced (2000). These systems were quantified through the collection of data and transformed into a series of objects - synchronous objects - that work in harmony to explore these choreographic structures, reveal their patterns and re-imagine what they might look like. The goal of the project was to create a learning platform to engage a broad public in this exploration of choreography, to explore cross-disciplinary research and to stimulate creative discovery for specialists and non-specialists alike.

Impossible triangles: flat actors in telematic theatre

In fact, in this scene, both A and B are online. A is in a classroom at the University of Amsterdam in The Netherlands, and B is in a television studio at Deakin University in Melbourne, Australia. The two locations are connected through video conference and, in each space, a local audience watches the local performer in the room, and the remote performer projected on a screen. The performers are captured in profile, and appear to be looking at computer screens in front of them but cannot actually see one another. The text is consciously banal, composed to replicate the broken rhythms and sequences, flattened tone and repetitions of scrolling words in a text box on a screen. Information about presence and absence (A or B is offline or online) is spoken as text. Although the two performers speak in accents that declare their different language/ cultures, the vernacular is generic 'internetslang'. The relatively monotonous and unpunctuated delivery of the textual rhythms is interrupted and counterpointed by a sound lag of nearly a second, and by a faint audio echo as one voice 'lands' in the second location. Its orchestration allows the sound fracture and dispersal in some moments. In other moments, the actors anticipate or absorb the gaps in transmission, driving the speech rhythms through so that the utterance 'arrives' precisely at the end of the prompt line.