Parametric investigation and measurement of near end and far end crosstalk in multiconductor microstrip transmission lines

This paper investigates and measures the near end and far end crosstalk in the multiconductor transmission line (MTL) mounted on the PCB by varying the parameters which are associated with physical dimension, characteristic of the substrate and the nature of input signal. With the variation of these factors, the coupling inductance and capacitance vary causing crosstalk. By using the method of moment (MoM), the per unit length parameters are calculated for microstrip lines. Subcircuit model is used to investigate the time domain and frequency domain analysis of near field and far field crosstalk. This parametric investigation is very useful for designing high speed interconnectors on PCB substrates. Some experimental results are presented to validate the analytical findings.

Soft matter : from shapes to forces on the nanoscale

Soft matter deforms in response to imposed external forces. Here we demonstrate how dynamic surface forces are linked to far-field deformations. This offers a new paradigm for determining forces between soft particles in colloidal systems. The particular example we use to illustrate this concept is that of a fluid drop interacting with a solid wall through hydrodynamic drainage flow coupled with repulsive or attractive dissimilar electrical double layer interactions. The force can be deduced from a simple analysis of the drop surface geometry outside the interaction zone.

Design and analysis of an antenna for batteryless transcranial direct current stimulation devices

The purpose of this study is to design a low-cost planar Archimedean dipole antenna for batteryless transcranial direct current stimulation devices. The antenna parameters including resonance frequency, radiation efficiency, radiation pattern, and gain are simulated using finite difference time domain based electromagnetic simulation software XFdtd. The proposed antenna is simulated with low-cost FR4 PCB substrate of thickness of 1.6 mm. The antenna is designed with half wavelength of resonant frequency and fed with a matching line. The target frequency band is the industrial, scientific and medical (ISM) band of 915 MHz which is in the simulated band width of 31 MHz (903-934MHz). Moreover, since the bio-effect of specific absorption rate by radio frequency electromagnetic wave for power harvesting is an important concern, we try to find out the safety limit. Thus a quantitative analysis of distributions of electric field and power absorption in anatomical human head model by the far field radio frequency energy received by our designed antenna has been presented.

Problems experienced by students on field placement: using research findings to inform curriculum design and content

Recent recognition of workplace learning from within the University sector has resulted in more emphasis being placed on including field experiences in course curriculum across a range of disciplines. This article begins with a short review of the literature relating to the current context in which work-based learning occurs. Next, selected findings from a survey of 39 Victorian social work students on their experiences of placement learning are reported. The survey focused on problems encountered by students on placement. A number of the problems students faced suggested the need for additional opportunities both before and during the placements to engage with material on safety in the field, and ways to deal with workplace stress and conflict. In response to these issues the article summarises some pedagogical strategies that may be used to enhance student learning in these areas both leading up to and during their field placements. In addition to matters relating to safety and stress, financial pressures were evident for students endeavouring to complete field placements. The recent moves from universities to embrace industry based learning, clearly has implications for funding support made available to students undertaking this type of education.

Heterologous microarray experiments used to identify the early gene response to heat stress in a coral reef fish

Coral reef fishes are expected to experience rising sea surface temperatures due to climate change. How well tropical reef fishes will respond to these increased temperatures and which genes are important in the response to elevated temperatures is not known. Microarray technology provides a powerful tool for gene discovery studies, but the development of microarrays for individual species can be expensive and time-consuming. In this study, we tested the suitability of a Danio rerio oligonucleotide microarray for application in a species with few genomic resources, the coral reef fish Pomacentrus moluccensis. Results from a comparative genomic hybridization experiment and direct sequence comparisons indicate that for most genes there is considerable sequence similarity between the two species, suggesting that the D. rerio array is useful for genomic studies of P. moluccensis. We employed this heterologous microarray approach to characterize the early transcriptional response to heat stress in P. moluccensis. A total of 111 gene loci, many of which are involved in protein processing, transcription, and cell growth, showed significant changes in transcript abundance following exposure to elevated temperatures. Changes in transcript abundance were validated for a selection of candidate genes using quantitative real-time polymerase chain reaction. This study demonstrates that heterologous microarrays can be successfully employed to study species for which specific microarrays have not yet been developed, and so have the potential to greatly enhance the utility of microarray technology to the field of environmental and functional genomics.

Close, but still too far: the experience of Australian people with cancer commuting from a regional to a capital city for radiotherapy treatment

This paper reports the findings of a study undertaken in November 2001 on the experiences of 17 rural people from the regional city of Toowoomba who had been diagnosed with cancer and were required to travel to the capital city of Queensland (Brisbane) for radiotherapy. The interviews were tape recorded; the recordings were transcribed verbatim and analysed for emergent themes and subthemes, following verification by the participants that the transcription was a true record of their experience. The major themes that arose from the study were (1) the burden of travel; (2) the difficulties of living in accommodation that is not one's own home; (3) the financial burden caused by the need to relocate or travel to and from Brisbane; (4) the lack of closeness to family and friends; (5) and feelings of being a burden on others. The findings suggest that at a time of stress, an increasing burden is placed on cancer clients and their families if they are required to travel for radiotherapy. Health professionals who read the results of this study should be aware of the isolation of rural people who have to live in an unfamiliar environment at a time of great stress. Support mechanisms should be put into place in these referral centres to deal with these stressors.

Analytic prediction of structural stress-strain relations of microstructured metal

Nanostructured and ultra-fine grained metals have higher strength but extremely limited ductility compared to coarse grained metals. However, their ductility can be greatly improved by introducing a specific range of grain sizes in the microstructures. In the paper, multiscale unit cell approach (UCA) is developed and applied to predict the averaged stress-strain relations of the multiscale microstructure metals. The unit cell models are three-phase structured at different scale lengths of 100 nm, 1 μm and 10 μm with different volume fractions and periodic boundary conditions. The contributions of multi-scale microstructures to the macroscopic structural properties of metals are also studied using a analytic approach—two-step mean-field method (TSMF), where three microstructural parameters are introduced and thus mechanical properties such as strength and ductility are presented as a function of these parameters. For verification of these proposed numerical and theoretical algorithms, the structural properties of the pure nickel with three-grain microstructures are studied and the results from FEA and the proposed theory have good agreement.

Examination of the "all hazards" approach to disaster management as applied to field disaster management and pre-hospital care in Australia

Disasters, emergencies, incidents, and major incidents - they all come back to the same thing regardless of what they are called. The common denominator is that there is loss of life, injury to people and animals and damage and destruction of property. The management of such events relies on four phases: 1. Prevention 2. Preparation 3. Response 4. Recovery Each of these phases is managed in a different way and often by different teams. Here, concentration has been given to phases 2 and 3, with particular emphasis on phase 3, Response. The words used to describe such events are often related to legislation. The terminology is detailed later. However, whatever the description, whenever prevention is not possible, or fails, then the need is to respond. Response is always better when the responders are prepared. Training is a major part of response preparation and this book is designed to assist those in the health industry who need to be ready when something happens. One of the training packages for responders is the Major Incident Medical Management and Support (MIMMS) Course and this work was designed to supplement the manual prepared by Hodgetts and Macway-Jones(87) in the UK. Included is what the health services responder, who may be sent to an event in which the main concern is trauma, should know. Concentration is on the initial response and does not deal in any detail with hospital reaction, the public health aspects, or the mental health support that provides psychological help to victims and responders, and which are also essential parts of disaster management. People, in times of disaster, have always been quick to offer assistance. It is now well recognised however, that the 'enthusiastic amateur', whilst being a well meaning volunteer, isn't always what is needed. All too often such people have made things worse and have sometimes ended up as victims themselves. There is a place now for volunteers and there probably always will be. The big difference is that these people must be well informed, well trained and well practiced if they are to be effective. Fortunately such people and organisations do exist. Without the work of the St John Ambulance, the State Emergency Service, the Rural Fire Service the Red Cross and the Volunteer Rescue Association, to mention only a few, our response to disasters would be far less effective. There is a strong history of individuals being available to help the community in times of crisis. Mostly these people were volunteers but there has also always been the need for a core of professional support. In the recent past, professional support mechanisms have been developed from lessons learned, particularly to situations that need a rapid and well organised response. As lessons are learned from an analysis of events, philosophy and methods have changed. Our present system is not perfect and perhaps never will be. The need for an 'all-hazards approach' makes detailed planning very difficult and so there will probably always be criticisms about the way an event was handled. Hindsight is a wonderful thing, provided we learn from it. That means that this text is certainly not the 'last word' and revisions as we learn from experience will be inevitable. Because the author works primarily in New South Wales, many of the explanations and examples are specific to that state. In Australia disaster response is a State, rather than a Commonwealth, responsibility and consequently, and inevitably, there are differences in management between the states and territories within Australia. With the influence of Emergency Management Australia, these differences are being reduced. This means that across state and territory boundaries, assistance is common and interstate teams can be deployed and assimilated into the response rapidly, safely, effectively and with minimum explanation. This text sets out to increase the understanding of what is required, what is in place and how the processes of response are managed. By way of introduction and background, examples are given of those situations that have occurred, or could happen. Man Made Disasters has been divided into two distinct sections. Those which are related to structures or transport and those related directly to people. The first section, Chapter 3, includes: • Transport accidents involving land, rail, sea or air vehicles. • Collapse of buildings for reasons other than earthquakes or storms. • Industrial accidents, including the release of hazardous substances and nuclear events. A second section dealing with the consequences of the direct actions of people is separated as Chapter 4, entitled 'People Disasters'. Included are: • Crowd incidents involving sports and entertainment venues. • Terrorism From Chapter 4 on, the emphasis is on the Response phase and deals with organisation and response techniques in detail. Finally there is a section on terminology and abbreviations. An appendix details a typical disaster pack content. War, the greatest of all man made disasters is not considered in this text.

Answering back to policy? Headteachers’ stress and the logic of the sympathetic interview

Headteacher workloads are often in the news. Long hours, punitive audit regimes and excessive amounts of paperwork take their toll on many, including John Illingworth, former National Union of Teachers (UK) President, and ex primary headteacher. In this paper, I investigate a UK BBC Radio 4 human interest interview conducted with Illingworth by the usually acerbic John Humphrys. Mobilising Bourdieu’s notion of field, I examine the interview and argue that the analysis suggests that the media game of market share and the doxa of the fourth estate might work to delimit the capacity of such interviews to speak truth to policy power.

From bivalves to birds : oxidative stress and longevity

1. The oxidative stress theory of ageing predicts that animals living longer will have less cumulative oxidative damage together with structural characteristics that make them more resistant to oxidative damage itself.
2. Although a general relationship between body size, metabolism and longevity does not exist in marine invertebrates, they are generally characterized by low rates of metabolism and reactive oxygen species (ROS) formation associated with lower antioxidant enzyme activities compared to vertebrates.
3. Birds and mammals have very similar size-affected metabolic rates and their metabolic intensity explains only some of the variation in maximum lifespan potential (MLSP).Within each class, smaller animals have higher rates of metabolism and ROS production and membranes that are more susceptible to oxidative damage and autocatalytic propagation of free radicals than larger ones.
4. Although the high variation in life-history strategies is accompanied by substantial variation in MLSP, there is a consistent positive correlation between rates of ROS formation and antioxidant levels among most animals examined so far for these traits. The consensus of these studies is that ROS and antioxidant levels are inversely related to MLSP.
5. The lack of a clear stoichiometric relation between variables contributing to oxidative stress limits our capacity to infer longevity consequences from measures of pro-oxidant or antioxidant status among or within species

Organisational change and the care of the self : stress management as ethical self-problematisation

In diverse arenas there is much discussion about the dangerousness of contemporary lifestyles, including the stressful nature of work. These stresses associated with contemporary lifestyles and work are dangerous in so far as they are conceived as placing at-risk the emotional, physical and psychic health and wellbeing of large populations. In this paper I engage with debates about the stressful nature of teachers’ work, and the ways in which teacher health and wellbeing is constructed as being central to the task of delivering more effective schools. I am not so much concerned with the nature of teacher stress as an indication of individual physical, emotional or psychic health and wellbeing. Rather I am more concerned with understanding how it is that at this particular historical juncture the self can be so widely conceived in terms of stress. Moreover, what processes make it possible at this moment to link the success or otherwise of a massive institutional process of state regulated schooling to the health and wellbeing of teachers and the management of this health and wellbeing by school managers?

The developmental stress hypothesis: A special case of the evolution of condition-dependent sexual traits

The idea that sexually selected traits might be condition dependent is far from novel (Zahavi 1975); however, the developmental stress hypothesis was proposed as a special case because of a highly plausible mechanism: the development of the neural circuits controlling song output coincides with a period of time during which developing birds are likely to be susceptible to stress. The elegant aspect of the hypothesis is that the mechanism is defined and effects can be readily tested (Nowicki et al. 1998; Buchanan et al. 2003). Compared with more general hypotheses about the evolution of condition-dependent sexual traits (Buchanan 2000), the second particularly interesting aspect of the developmental stress hypothesis is that, in some species, individuals may suffer historical markers of stress. This is because in species with a fixed period for neural growth and song learning, there is no possibility for compensation in later life for stress experienced during early development. Females using such a marker of stress may benefit by obtaining a partner whose other cognitive functions have not been impaired by stress.

New 'green' corrosion inhibitors based on rare earth compounds

A series of rare earth organic compounds pioneered by our group have been shown to provide a viable alternative to theuse of chromates as corrosion inhibitors for some steel and aluminium applications. For example we have shown thatthe lanthanum 4-hydroxy cinnamate offers excellent corrosion mitigation for mild steel in aqueous environments whilerare earth diphenyl phosphates offer the best protection in the case of aluminium alloys. In both cases the protectionappears to be related to the formation of a nanometre thick interphase occurring on the surface that reduces theelectrochemical processes leading to metal loss or pitting. Very recent work has indicated that we may even be able toaddress the challenging issue of stress corrosion cracking of high strength steels. Furthermore, filiform corrosion can besuppressed when selected rare earth inhibitor compounds are added as pigments to a polymer coating. There is little doubtfrom the work thus far that a synergy exists between the rare earth and organic inhibitor components in these novelcompounds. This paper reviews some of the published research conducted by the senior author and colleagues over the past10 years in this developing field of green corrosion inhibitors