Rationale for the use of DC microgrids: feasibility, efficiency and protection analysis

Electrical power systems are undergoing highly significant changes in their structures. The emergence of renewable energy units in the power generation sector, the use of high-voltage DC in the power transmission sector, and the prevalence of islanded or integrated microgrids in the distribution sector are the strongest evidence supporting this claim. These changes are mostly the consequences of the increasing energy demand rate, climate change, and environmental challenges, as well as the high investment and maintenance cost of the previous structures. Considering these new conditions and according to the recent development in DC/DC conversion topologies and control techniques, different studies have been conducted on how and why DC microgrids outperform AC microgrids. This study discusses the feasibility of the DC microgrid system according to recent developments in power systems. The efficiency and power loss reduction in DC distribution systems are then analyzed, some of the common strategies and devices for protection systems in such networks are reviewed, and the possible and existing challenges in developing the DC microgrids are highlighted. The mathematical calculations and theories for this evaluation are presented to determine the reliable justification for selecting the appropriate microgrid systems.

Simulation and evaluation of HERIC and H5 transformerless inverter topologies

Most of the inverters have an isolation transformer which prevents or limits fault current between AC and DC circuits under most fault conditions. If the transformer is excluded from the system, it would increase the PV system efficiency and decrease the size of its installations, which will lead to a lower cost for the whole investment. Thus, elimination of the transformer has to be considered carefully because a galvanic connection appears between the PV arrays and the ground in the absence of an isolation transformer. The galvanic connection causes the stray capacitance between the PV arrays structure and the ground to produce a leakage current. In this paper, a review of full bridge topology with bipolar and unipolar scheme and half bridge topology carried out in regard leakage current.in addition, HERIC and H5 topologies are simulated and leakage current in these topologies are evaluated.

Performance of building integrated solar hot water systems

The integration of solar energy systems into buildings has been the subject of considerable commercial and academic research, particularly building integrated photovoltaics. However, the integration of solar hot water systems into roofing systems has had far less attention. This paper presents the theoretical and experimental results of a novel building integrated solar hot water system developed using existing long run roofing materials.

This work shows that it is possible to achieve effective integration that maintains the aesthetics of the building and also provides useful thermal energy. The results of an unglazed 108m2 swimming pool heater and 8m2 glazed domestic hot water systems are presented.

The experimental results show that the glazed system performs close to the theoretical model and is an effective provider of hot water in certain climates. However it was also found that for larger scale building integrated solar water heating systems, special attention must be paid to the configuration and arrangement of the collectors in order to minimise problems with respect to flow distribution and its effect on collector and system efficiency.

Voltage stability analysis with optimum size and location based synchronous machine DG

Power loss of a distribution system can be reduced significantly by using optimum size and location of distributed generation (DG). Proper allocation of DG with appropriate size maximizes overall system efficiency. Moreover it improves the reliability and voltage profile of the distribution system. In this paper, IEEE 123 node test feeder has been considered to determine the optimum size and location of a synchronous machine based DG for loss reduction of the system. This paper also investigates the steady-state and dynamic voltage profile of that three phase unbalance distribution network in presence of DG with optimum size. This analysis shows that optimum size of DG at proper location minimizes the power loss as well as improves the dynamic voltage profile of the distribution system.

A comprehensive framework for assessing the life-cycle energy of building construction assemblies

Building environmental design typically focuses on improvements to operational efficiencies such as building thermal performance and system efficiency. Often the impacts occurring across the other stages of a building's life are not considered or are seen as insignificant in comparison. However, previous research shows that embodied impacts can be just as important. There is limited consistent and comprehensive information available for building designers to make informed decisions in this area. Often the information that is available is from disparate sources, which makes comparison of alternative solutions unreliable. It is also important to ensure that strategies to reduce environmental impacts from one life cycle stage do not come at the expense of an increase in overall life-cycle impacts. A consistent and comprehensive framework for assessing and specifying building assemblies for enhanced environmental outcomes does not currently exist. This article presents the initial findings of a project that aims to establish a database of life cycle energy requirements for a broad range of construction assemblies, based on a comprehensive assessment framework. Life cycle energy requirements have been calculated for eight residential construction assemblies integrating an innovative embodied energy assessment technique with thermal performance modelling and ranked according to their performance. © #2010 Earthscan ISSN: 0003-8628.

Hungry for change: the food banking industry in Australia

Purpose – Over the last 20 years, food banks in Australia have expanded nationwide and are a well-organised “industry” operating as a third tier of the emergency food relief system. The purpose of this paper is to overview the expansion and operation of food banks as an additional self-perpetuating “tier” in the response to hunger.

Design/methodology/approach – This paper draws on secondary data sourced from the internet; as well as information provided by Foodbank Australia and Food Bank South Australia (known as Food Bank SA) to outline the history, development and operation of food banks. Food banking is then critically analysed by examining the nature and framing of the social problems and policies that food banking seeks to address. This critique challenges the dominant intellectual paradigm that focuses on
solving problems; rather it questions how problem representation may imply certain understandings.

Findings – The issue of food banks is framed as one of food re-distribution and feeding hungry people; however, the paper argue that “the problem” underpinning the food bank industry is one of maintaining food system efficiency. Food banks continue as a neo-liberal mechanism to deflect query, debate and structural action on food poverty and hunger. Consequently their existence does little to ameliorate the problem of food poverty.

Practical implications – New approaches and partnerships with stakeholders remain key challenges for food banks to work more effectively to address food poverty.

Social implications – While the food bank industry remains the dominant solution to food poverty in Australia, debate will be deflected from the underlying structural causes of hunger.

Originality/value – This paper contributes to the limited academic literature and minimal critique of the food bank industry in Australia. It proposes that the rapid expansion of food banks is a salient marker of government and policy failure to address food poverty.

Intelligent facial emotion recognition using a layered encoding cascade optimization model

In this research, we propose a facial expression recognition system with a layered encoding cascade optimization model. Since generating an effective facial representation is a vital step to the success of facial emotion recognition, a modified Local Gabor Binary Pattern operator is first employed to derive a refined initial face representation and we then propose two evolutionary algorithms for feature optimization including (i) direct similarity and (ii) Pareto-based feature selection, under the layered cascade model. The direct similarity feature selection considers characteristics within the same emotion category that give the minimum within-class variation while the Pareto-based feature optimization focuses on features that best represent each expression category and at the same time provide the most distinctions to other expressions. Both a neural network and an ensemble classifier with weighted majority vote are implemented for the recognition of seven expressions based on the selected optimized features. The ensemble model also automatically updates itself with the most recent concepts in the data. Evaluated with the Cohn-Kanade database, our system achieves the best accuracies when the ensemble classifier is applied, and outperforms other research reported in the literature with 96.8% for direct similarity based optimization and 97.4% for the Pareto-based feature selection. Cross-database evaluation with frontal images from the MMI database has also been conducted to further prove system efficiency where it achieves 97.5% for Pareto-based approach and 90.7% for direct similarity-based feature selection and outperforms related research for MMI. When evaluated with 90° side-view images extracted from the videos of the MMI database, the system achieves superior performances with >80% accuracies for both optimization algorithms. Experiments with other weighting and meta-learning combination methods for the construction of ensembles are also explored with our proposed ensemble showing great adpativity to new test data stream for cross-database evaluation. In future work, we aim to incorporate other filtering techniques and evolutionary algorithms into the optimization models to further enhance the recognition performance.

Associations of public transport accessibility with walking, obesity, metabolic syndrome and diabetes

Objective: To examine associations of public transport system accessibility with walking, obesity, metabolic syndrome and diabetes/impaired glucose regulation. Methods: Associations of public transport accessibility with self-reported walking for transport or recreation and measured biomarkers of chronic disease risk were estimated in 5241 adult residents of 42 randomly selected areas in Australia in 2004/05, drawn from the second wave of a population-based cohort study (AusDiab). Public transport accessibility was objectively measured using an adaptation of the Public Transport Accessibility Levels (PTAL) methodology, comprising both GIS derived spatial and temporal accessibility measures. Logistic regression models were adjusted for individual and environmental level covariates and clustering within areas. Results: Above median public transport accessibility was positively associated with a walking time of more than the median 90 min per week (OR=1.28, 95%CI 1.03, 1.60) and walking above the recommended 150 min per week (OR=1.35, 95%CI 1.11, 1.63). There were no associations of public transport accessibility with obesity (OR=1.05, 95%CI 0.85, 1.30), the metabolic syndrome (OR=1.09, 95%CI 0.91, 1.31) nor diabetes/impaired glucose regulation (OR=1.11, 95%CI 0.94, 1.30). Findings were similar for a subgroup reporting no vigorous recreational physical activity. Conclusions: In this Australian sample, public transport accessibility was positively associated with walking at recommended levels, including for people who are not otherwise vigorously active. Significance: Walking is crucial for increasing physical activity levels and population health, as well as maximising public transport system efficiency. Building evidence on public transport accessibility and walking will enable governments to exploit this important synergy.

SEMD: secure and efficient message dissemination with policy enforcement in VANET

Vehicular ad hoc network (VANET) is an increasing important paradigm, which not only provides safety enhancement but also improves roadway system efficiency. However, the security issues of data confidentiality, and access control over transmitted messages in VANET have remained to be solved. In this paper, we propose a secure and efficient message dissemination scheme (SEMD) with policy enforcement in VANET, and construct an outsourcing decryption of ciphertext-policy attribute-based encryption (CP-ABE) to provide differentiated access control services, which makes the vehicles delegate most of the decryption computation to nearest roadside unit (RSU). Performance evaluation demonstrates its efficiency in terms of computational complexity, space complexity, and decryption time. Security proof shows that it is secure against replayable choosen-ciphertext attacks (RCCA) in the standard model.

A medium-temperature solar thermal power system and its efficiency optimisation

This paper firstly expounds that the reheat-regenerative Rankine power cycle is a suitable cycle for the parabolic trough collector, a popular kind of collector in the power industry. In a thermal power cycle, the higher the temperature at which heat is supplied, the higher the efficiency of the cycle. On the other hand, for a given kind of collector at the same exiting temperature, the higher the temperature of the fluid entering the collector, the lower the efficiency of the collector. With the same exiting temperature of the solar field and the same temperature differences at the hottest end of the superheater/reheater and at the pinch points in the heat exchangers (e.g., the boiler) in the cycle, the efficiencies of the system are subject to the temperature of the fluid entering the collector or the saturation temperature at the boiler. This paper also investigates the optimal thermal and exergetic efficiencies for the combined system of the power cycle and collector. To make most advantage of the collector, the exiting fluid is supposed to be at the maximum temperature the collector can harvest. Hence, the thermal and exergetic efficiencies of the system are related to the saturation temperature at the boiler here.

CONBPS : an expert system to improve the efficiency of the construction process

The aim of the research outlined in this paper is to develop a best practice process model for building projects based on the use of an expert system. The CONstruction Best Practice System (CONBPS) focusses on projects which are based on the traditional procurement strategy, using the JCT 80 standard form of contract. The model clearly identifies the sequence of construction activities. It also identifies the roles and responsibilities of the major parties on the building team and the issues within the project cycle, which can prove critical to project success. The system incorporates many user-friendly functions, including the provision of multi-choice icons and the provision of an on-line help function. Besides, it also provides interim and final reports which are used to advise the participants on the success factors that they have ignored and to which aspects they should pay more attention. A framework was initially developed focussing on the whole design process with a full knowledge-based system developed for the Inception Stage. CONBPS can be used as a teaching/learning tool to assist teachers and students to better understand the construction process. Also, it could prove useful to project managers and all the participants in the construction process.