Photocatalytic decolorization of lanasol blue CE dye solution using a flat-plate reactor

This paper reports the effectiveness of the photocatalysis TiO₂ in degrading Lanasol Blue CE. A flat-plate reactor (FPR) with a reactor area of 0.37 m² and ultraviolet (UV) light source of six 36 W blacklight lamps was used in the study. Operating variables including dosage of the photocatalyst, flow rates through the FPR, UV intensity, and tilted angle of the reactor were investigated to degrade Lanasol Blue CE. Results showed that the photocatalytic process can efficiently remove the color in textile dyeing effluent. The degradation process was approximated using first-order kinetics. The photocatalytic apparent reaction rate increased with the increasing UV intensity received by the photocatalyst TiO₂ in slurry. The liquid flow rate and tilted angle influenced the film thickness. The apparent reaction rate constant was mainly determined by the liquid film thickness, UV intensity, and the dosage of the photocatalyst. The findings of this research can be utilized as preliminary input for potential solar photocatalytic applications on color removal from dye solutions.

Cerium acetylacetonates—new aspects, including the lamellar clathrate [Ce(acac)4]·10H2O

Reactions of CeCl₃·7H₂O and Ce(NO₃)₃·6H₂O with Naacac or NH₄acac in aqueous solution at 21 and 45 °C yielded the trihydrate [Ce(acac)₃(H₂O)₂]·H₂O and the dihydrate [Ce(acac)₃(H₂O)₂], respectively, whereas similar treatment of (NH₄)₂[Ce(NO₃)₆] gave the trihydrate at both temperatures. Desiccation of the hydrates over silica gel left the dihydrate unchanged, whereas the trihydrate underwent decomposition rather than dehydration. Aerial oxidation of [Ce(acac)₃(H₂O)₂] in CH₂Cl₂ and toluene yielded α-[Ce(acac)₄] and β-[Ce(acac)₄], respectively, the structure of the former being re-determined with improved precision. Careful treatment of aqueous (NH₄)₄[Ce(SO₄)₄] and Hacac (initially pH 1–2) with aqueous ammonia to pH 5 precipitated hydrated [Ce(acac)₄], from which [Ce(acac)₄]·10H₂O was isolated as unstable, light-sensitive single crystals, and the structure was determined. The complex is a laminar clathrate containing layers of Ce(acac)₄ molecules sandwiched between extensive hydrogen-bonded layers of water molecules which do not interact with the metal. Electrochemical experiments confirmed the unstable nature of hydrated Ce^III(acac)₃, while the reduction of [Ce(acac)₄] yielded well-defined cyclic voltammograms in acetonitrile and acetone, corresponding to a quasi-reversible process. For the [Ce^IV(acac)₄]/[Ce^III(acac)₄]⁻redox couple, a calculated reversible potential of 0.22±0.02 V versus SHE was obtained in acetone or acetonitrile (0.1 M Bu₄NPF₆) at both gold and glassy carbon electrodes. This potential is consistent with the ease of both oxidation and reduction of cerium acetylacetonate complexes as found in the synthetic studies.

Heterometallic CeIII–FeIII–salicylate networks : models for corrosion mitigation of steel surfaces by the ′Green′ inhibitor, Ce(salicylate)3

The syntheses and structures of the novel Ce–Fe bimetallic complexes [{Fe(sal)₂(bpy)}₂Ce(NO₃)(H₂O)₃]·EtOH and [{Fe(sal)₂(bpy)}₄Ce₂(H₂O)₁₁][salH]₂·EtOH·3H₂O (salH₂ = salicylic acid) suggest Fe³⁺–sal²⁻ units and Ce–OC(R)O–Fe bridging contribute to the formation of corrosion inhibitive layers on steel surfaces exposed to [Ce(salH)₃(H₂O)].