Colloid probe AFM study of thermal collapse and protein interactions of poly(N-isopropylacrylamide) coatings

Graft coatings of poly(N-isopropylacrylamide) (pNIPAM) are of considerable interest for the reversible control of bio-interfacial interactions. In this study, graft coatings were prepared by free radical polymerisation from surface-bound polymerisable groups, on silicon wafers and quartz crystal microbalance (QCM) sensors. QCM with dissipation monitoring showed a gradual, extended phase change as the temperature increased. Colloid probe atomic force microscopy (CP-AFM) revealed a marked change in the compressibility of the coating below and above the lower critical solution temperature (LCST). Force curves showed an approximate 9-fold reduction in thickness between 24 °C and 38 °C, yet the collapsed coating at 38 °C still had a thickness significantly higher than the ellipsometrically determined dry thickness, indicating a residual extent of hydration above the LCST. At all temperatures, interaction force curves showed steric repulsion, though over different distances. There was little hysteresis between approach and retract force curves, which is evidence for almost instantaneous relaxation of the coating upon decompression. CP-AFM using a probe coated with bovine serum albumin (BSA) showed repulsive interactions with little approach/retraction hysteresis below the LCST, indicating lack of adhesion between the pNIPAM coating and the BSA-coated probe. In contrast, above the LCST the force curves on retraction were characteristic of adhesion, while the approach curves were still repulsive, and the adhesion increased in strength as the temperature was increased further beyond the LCST. Thus, QCM-D and CP-AFM data correlated well in showing a gradual nature of the phase transition and a concomitant gradual change in the interaction force with BSA.

Self-cleaning wool: effect of noble metals and silica on visible-light-induced functionalities of nano TiO2 colloid

© 2014 The Textile Institute. This study intends to enhance the functionality of titanium dioxide (TiO2) nanoparticles applied to wool fabrics under visible light. Herein, TiO2, TiO2/SiO2, TiO2/Metal, and TiO2/Metal/SiO2 nanocomposite sols were synthesized and applied to wool fabrics through a low-temperature sol–gel method. The impacts of three types of noble metals, namely gold (Au), platinum (Pt), and silver (Ag), on the photoefficiency of TiO2 and TiO2/SiO2 under visible light were studied. Different molar ratios of Metal toTiO2 (0.01, 0.1, 0.5, and 1%) were employed in synthesizing the sols. Photocatalytic efficiency of fabrics was analyzed through monitoring the removal of red wine stain and degradation of methylene blue under simulated sunlight and visible light, respectively. Also, the antimicrobial activity against Escherichia coli (E. coli) bacterium and the mechanical properties of fabrics were investigated. Through applying binary and ternary nanocomposite sols to fabrics, an enhanced visible-light-induced self-cleaning property was imparted to wool fabrics. It was concluded that the presence of silica and optimized amount of noble metals had a synergistic impact on boosting the photocatalytic and antimicrobial activities of coated samples. The fabrics were further characterized using attenuated total reflectance, energy-dispersive X-ray spectrometry, and scanning electron microscopy images.

The role of nano colloid of TiO2 and butane tetra carboxylic acid on the alkali solubility and hydrophilicity of proteinous fibers

One of the main problems of wool as an important proteinous fiber is low resistance against alkali media. Finding a way to solve this problem without any influences on other fiber characteristics is still a matter of research. Using nano particles on textile materials is a new approach to produce novel properties. Here, nano titanium dioxide (NTO) particles along with butane tetra carboxylic acid (BTCA) were sonicated in the ultra sound bath and applied as a nano colloid on the wool fabric. BTCA played different roles as wool cross-linker, a polyanionic agent, and stabilizer for nano TiO2. Various concentrations of NTO and BTCA were applied through impregnation of the fabric in ultrasonic bath followed by curing. The resistance of fabrics against alkali was assessed by solubility in sodium hydroxide and the hydrophilicity monitored by the water drop absorption time and the contact angle before and after UV irradiation. Interestingly, the alkali solubility of the nano TiO2 treated wool fabrics reduced while the fabric became more hydrophilic. This fact was shown by the testing results and is thoroughly discussed in the article. The response surface methodology (RSM) was also applied to find the optimum conditions for the wool fabric treatment.

Deployment of DGT units in marine waters to assess the environmental risk from a deep sea tailings outfall

Measurements of total, filterable and DGT-labile concentrations of nine metals (Al, Cd, Cr, Cu, Fe, Pb, Mn, Ni and Zn) have been made at five sites up to 4.2km from a deep sea tailings outfall operated by Lihir Gold Ltd. at Lihir Island, Papua New Guinea. At each site, pairs of DGT units (one containing a 0.4mm and the other a 0.8mm diffusive gel layer) were deployed at three depths (50–70; 105–130; 135–155m) for 4–7 days. Comparison of predicted water column DGT-labile metal concentrations in field deployments showed the 0.8mm DGT units were relatively enriched in metals, with the effect being greatest closer to the outfall for Pb and Mn and least for Fe, Cr, Ni and Zn. The most likely explanation for this is that in addition to simple ion diffusion, kinetic factors associated with ageing or desorption processes govern release of metals from iron and aluminium oxyhydroxide colloids which diffuse through the gels. The thicker gels have a longer residence time over which metals can be released for adsorption. This model explains why enrichment is most pronounced near the outfall; more distant sites have lower colloid concentrations because of the longer time for coagulation to increase particle sizes to the extent they cannot enter the gels. Total and filterable metal (FM) concentrations were frequently below the limits of detection (LOD) achievable by conventional ICP-AES (1–52gL⁻¹) and this limited their usefulness for assessing environmental risk and for metal speciation determination. Because of its pre-concentration step DGT gave metal concentrations above their LODs and these decreased exponentially with distance from the outfall. Concentrations of DGT–labile metal fell below Australian water quality guidelines for protection of 99% of marine organisms within 0.13km of the outfall for Cd, Cr and Ni and below that for protection of 95% of marine organisms within 0.4, 0.7 and 3.6km for lead, zinc and copper, respectively.

Analysis of 5-hydroxyisoflavones by surface-enhanced Raman spectroscopy : genistein and methoxy derivatives

A series of 5-hydroxy-isoflavones—genistein, biochanin A, prunetin, and 4′,7-dimethoxygenistein—have been studied by surface-enhanced Raman spectroscopy (SERS). Citrate reduced silver colloids were employed as a standard technique to measure SER spectra over a range of pH and concentrations. Density functional theory calculations were used to assist in determining the mode of interaction of isoflavones with the silver nanoparticles. It is revealed that biochanin A and prunetin interact with the silver nanoparticles upon deprotonation of the 7- and the 4′-OH groups, respectively, to show SERS activity. Correlations of their spectra with SERS of genistein strongly support the presence of multiple interaction modes involving both of the OH groups in genistein, in a similar manner to daidzein. Surprisingly, however, under these conditions, the 5-OH group was found to be noninteractive as revealed by attempts to measure SERS of 4′,7-dimethoxygenistein. This was attributed partly to the low solubility and, more importantly, to the influence of steric hindrance, caused by the position of the pendant phenyl ring, which prevented interaction with the Ag colloid surface. These results complement recent work on daidzein and formononetin and provide further insight into understanding the SER spectra of isoflavones.

Measuring surface forces to explore surface chemistry : mica, sapphire and silica

In this paper measurements of the forces acting between two solid surfaces separated by a thin liquid film are discussed. By investigating these forces in a range of different liquids and solutions, it is possible to acquire an understanding of the surface properties of the solid material. The surface of mica has been studied extensively in this way, and the results obtained are reviewed to illustrate how the surface force measurements can give surface chemical information. Recent measurements on two other materials, sapphire and silica, which are of greater practical interest are also discussed.

Forces between bilayers of cetyltrimethylammonium bromide in micellar solutions

A direct force-measuring technique has been used to study the interaction forces between adsorbed CTAB (cetyltrimethylammonium bromide) bilayers at concentrations well above the CMC (critical micelle concentration). An analysis of these results based on the Poisson-Boltzmann equations leads to the conclusion that CTAB micelles and adsorbed bilayers are about 22(±4)% dissociated. The apparent agreement of bilayer and micellar ion binding parameters raises an important challenge for theories of double-layer interactions. In addition, the double-layer decay lengths observed in these micellar solutions appear to be due entirely to the dissociated bromide and free CTA+ ions, with no apparent contribution from charged micelles.

Hydrophobic attraction may contribute to aqueous flocculation of clays

SEM observations of low solid content vitrified clay suspensions reveal that clay platelets build porous three-dimensional networks with platelets contacting each other mostly by their edges. To explain this behaviour, which must require long range edge-to-edge (EE) attractive forces, a hydrophobic-like interaction has been proposed. This interaction may be induced by the presence of nano-bubbles existing on the edges of clay crystals which may cause clay particles to flocculate. The following indirect evidence for such hydrophobic behaviour is presented. First, a clay platelet is shown attached to an oil drop by its edge; second, clay flocs were attracted by a vertically placed Teflon strip but not to the hydrophilic mica basal surface; third, a much thicker porous sediment occurred in CO2-saturated water solution compared with vacuum degassed water.

Photoinduced shape conversion and reconstruction of silver nanoprisms

A series of shapes of silver nanoplates were achieved by adjusting the concentration of citrate in the colloid in the photoinduced process. The local surface plasmon resonance (LSPR) of the silver nanoplates could be tuned gradually in a range from 740 to 440 nm. In contrast, the LSPR band can be photomediated again to the long wavelength region within 620-690 nm only by adding more citrate to the colloidal system. The initial silver nanoprisms converted to the discal shape under the light effect. In this conversion, the coupling effect of the plasmon resonance and the light source speeds up the photothermal reaction. Subsequently, the reconstruction of silver nanoprisms from the nanodisks took place in the presence of more citrate through the photoconversion.

Two-dimensional correlation localized surface plasmon resonance spectroscopy for analysis of the interaction between metal nanoparticles and bovine serum albumin

Time-resolved extinction spectra assisted with two-dimensional correlation spectroscopy (2DCOS) analysis and principal component analysis (PCA) were employed to investigate the interaction between bovine serum albumin (BSA) and metal nanoparticles (NPs). A series of localized surface plasmon resonance (LSPR) spectra of metal NPs were measured just after a small amount of BSA was added into metal colloids. Through 2DCOS analysis, remarkable changes in the intensities of the LSPR were observed. The interaction process was totally divided into three periods according to the PCA. Transmission electron microscopy, dynamic light scattering, and ζ-potential measurements were also employed to characterize the interaction between BSA and metal NPs. The addition of BSA brings silver NPs to aggregate through the electrostatic interaction between them, but it has less effect on gold NPs. In a gold and silver mixed system, gold NPs can affect the interaction of silver NPs and BSA, leading it to weaken. The combination of 2DCOS analysis and LSPR spectroscopy is powerful for exploring the LSPR spectra of the metal NP involved systems. This combined technique holds great potential in LSPR sensing through analysis of slight, slim spectral changes of metal colloids

Fabrication of high specificity hollow mesoporous silica nanoparticles assisted by Eudragit for targeted drug delivery.

Hollow mesoporous silica nanoparticles (HMSNs) are one of the most promising carriers for effective drug delivery due to their large surface area, high volume for drug loading and excellent biocompatibility. However, the non-ionic surfactant templated HMSNs often have a broad size distribution and a defective mesoporous structure because of the difficulties involved in controlling the formation and organization of micelles for the growth of silica framework. In this paper, a novel "Eudragit assisted" strategy has been developed to fabricate HMSNs by utilising the Eudragit nanoparticles as cores and to assist in the self-assembly of micelle organisation. Highly dispersed mesoporous silica spheres with intact hollow interiors and through pores on the shell were fabricated. The HMSNs have a high surface area (670m(2)/g), small diameter (120nm) and uniform pore size (2.5nm) that facilitated the effective encapsulation of 5-fluorouracil within HMSNs, achieving a high loading capacity of 194.5mg(5-FU)/g(HMSNs). The HMSNs were non-cytotoxic to colorectal cancer cells SW480 and can be bioconjugated with Epidermal Growth Factor (EGF) for efficient and specific cell internalization. The high specificity and excellent targeting performance of EGF grafted HMSNs have demonstrated that they can become potential intracellular drug delivery vehicles for colorectal cancers via EGF-EGFR interaction.

Sodium bicarbonate infusion in patients undergoing orthotopic liver transplantation: a single center randomized controlled pilot trial

BACKGROUND: Liver transplantation-associated acute kidney injury (AKI) carries significant morbidity and mortality. We hypothesized that sodium bicarbonate would reduce the incidence and/or severity of liver transplantation-associated AKI. METHODS: In this double-blinded pilot RCT, adult patients undergoing orthotopic liver transplantation were randomized to an infusion of either 8.4% sodium bicarbonate (0.5 mEq/kg/h for the first hour; 0.15 mEq/kg/h until completion of surgery); (n = 30) or 0.9% sodium chloride (n = 30). Primary outcome: AKI within the first 48 h post-operatively.RESULTS: There were no significant differences between the two treatment groups with regard to baseline characteristics, model for end-stage liver disease and acute physiology and chronic health evaluation (APACHE) II scores, and pre-transplantation renal function. Intra-operative factors were similar for duration of surgery, blood product requirements, crystalloid and colloid volumes infused and requirements for vasoactive therapy. Eleven patients (37%) in the bicarbonate group and 10 patients (33%) in the sodium chloride group developed a post-operative AKI (p = 0.79). Bicarbonate infusion attenuated the degree of immediate post-operative metabolic acidosis; however, this effect dissipated by 48 h. There were no significant differences in ventilation hours, ICU or hospital length of stay, or mortality. CONCLUSIONS: The intra-operative infusion of sodium bicarbonate did not decrease the incidence of AKI in patients following orthotopic liver transplantation.

Changes in intravenous fluid use patterns in Australia and New Zealand: evidence of research translating into practice

OBJECTIVES: To describe changes in the use of intravenous (IV) fluid by quantity and type in different regions of Australia and New Zealand. DESIGN, SETTING AND PARTICIPANTS: We conducted a retrospective ecological study examining regional and temporal trends in IV fluid consumption across Australia and New Zealand over the periods 2012-2013 and 2013- 2014, using national proprietary sales data as a surrogate for consumption, and demographic data from the public domain. RESULTS: More than 13.3 million litres of IV fluid were consumed in Australia and New Zealand in 2012-2013, and more than 13.9 million litres in 2013-2014, with colloid solutions accounting for < 2%. There was marked regional variation in consumption of fluids, by volumes and proportions used, when standardised to overall Australian and New Zealand values. There was no significant change in the overall volume of crystalloid solutions consumed but there was a significant decrease (9%; P = 0.02) in the ratio of unbalanced to balanced crystalloid solutions consumed. Consumption of all forms of colloid solutions decreased, with a 12% reduction overall (P = 0.02), primarily driven by a 67% reduction in the consumption of hydroxyethyl starch (HES) solutions. CONCLUSIONS: The amount and type of IV fluid use, as determined by fluid sales, is highly variable across Australia and New Zealand. However, overall use of balanced crystalloid solutions is increasing and the use of HES has decreased dramatically.