Effect of increased temperature on erosion-corrosion under turbulent conditions in Bayer liquor

A study of the behaviour of mild steel in synthetic Bayer liquor at 25 °C and 95 °C showed that turbulent conditions had a small effect on the anodic currents at 25 °C, but caused large increases in currents at 95 °C. This may be due to the increased solubility of magnetite at the higher temperature.

Determination of yield and erosion damage functions using subjectively elicited data: application to small holder tea in Sri Lanka

Tea has been Sri Lanka's major export earner for several decades. However, soil erosion on tea-producing land has had considerable on-site and off-site effects. This study quantifies soil erosion impacts for smallholder tea farms in Sri Lanka by estimating a yield damage function and an erosion damage function using a subjective elicitation technique. The Mitscherlich-Spillman type of function was found to yield acceptable results. The study indicates that high rates of soil erosion require earlier adoption of soil conservation measures than do low rates of erosion. Sensitivity analysis shows the optimum year to change to a conservation practice is very sensitive to the discount rate but less sensitive to the cost of production and price of tea.

The influence of heat treatment on the corrosion behaviour of as-spun amorphous Al88Ni6La6 alloy in 0.01 M NaCl solution

The effect of the heat treatment on the corrosion behaviour of amorphous Al₈₈Ni₆La₆ made by melt-spun has been investigated by electrochemical measurements. Heat treatment was carried out at 523 K and 673 K for 4 min and 15 min respectively. The evolution of the crystallization process after annealing was identified by differential scanning calorimeter (DSC) as well as X-ray diffraction. The XRD patterns show that the structure of samples heat-treated at higher temperature changes towards a crystal state. The results obtained from the polarization curves reveal that all Al₈₈Ni₆La₆ alloys exhibit spontaneously passivated behaviour. Furthermore, it is noted that the partially crystallized alloy has the best corrosion resistance in comparison with as-spun amorphous and fully crystallized alloys, while the fully crystallized sample shows deterioration in the corrosion resistance.

Effect of crystallization on corrosion resistance of Cu52.5Ti30Zr11.5Ni6 bulk amorphous alloy

The effects of crystallization on the corrosion resistance of a  Cu52.5Ti30Zr11.5Ni6 bulk amorphous alloy in 1 mol/L HCl, and 6 mol/L NaOH solutions were studied. The amorphous alloy was identified by  differential thermal analysis(DSC) and by X-ray diffraction(XRD). The partially and fully crystallized alloys were prepared by controlling the annealing  temperatures at 738 and 873 K for 1 and 12 min, respectively, and the corrosion resistances of those annealed alloys were compared with that of the amorphous alloy by immersion test and potentiodynamic measurements in 1 mol/L HCl and 6 mol/L NaOH solutions. The results show that the  partially crystallized alloy exhibits high corrosion resistance, whereas full crystallization results in deteriorated corrosion resistance compared with that of the as-cast amorphous alloy.

Estimating the user cost of soil erosion in tea smallholdings in Sri Lanka

Soil erosion in developing countries is a widespread problem causing considerable economic damage. It still remains an intractable problem in many countries. Available research findings on costs of soil erosion indicate them to be high. Soil erosion continues to be a problem due to the difficulties of estimating the economic damages and attendant difficulties in developing effective control policies. This paper considers soil to be a nonrenewable resource and estimates the marginal user costs using a yield damage function. Results indicate user costs to be low for individual farms. The low user costs are due to some of the assumptions made with respect to a number of parameters such as prices of tea, costs, and technological developments. The results also indicate that marginal user costs are sensitive to prices, soil depth and soil loss.

Soil erosion in developing countries: a socio-economic appraisal

Soil erosion is the single most important environmental degradation problem in the developing world. Despite the plethora of literature that exists on the incidence, causes and impacts of soil erosion, a concrete understanding of this complex problem is lacking. This paper examines the soil erosion problem in developing countries in order to understand the complex inter-relationships between population pressure, poverty and environmental-institutional dynamics. Two recent theoretical developments, namely Boserup's theory on population pressure, poverty and soil erosion and Lopez's theory on environmental and institutional dynamics have been reviewed. The analysis reveals that negative impacts of technical change, inappropriate government policies and poor institutions are largely responsible for the continued soil erosion in developing countries. On the other hand, potential for market-based approaches to mitigate the problem is also low due to the negative externalities involved. A deeper appreciation of institutional and environmental dynamics and policy reforms to strengthen weak institutions may help mitigate the problem.

Effect of materials on the urban thermal environment a CFD simulation approach

Use of high albedo materials reduces the amount of solar radiation absorbed through building envelops and urban structures and thus keeping their surfaces cooler. The cooling energy savings by using high albedo materials have been well documented. Higher surface temperatures add to increasing the ambient temperature as convection intensity is higher. Such temperature increase has significant impacts on the air conditioning energy utilization in hot climates. This study makes use of a parametric approach by varying the temperature of building facades to represent commonly used materials and hence analyzing its effect on the air temperature through a series of CFD (Computational Fluid Dynamics) simulations. A part of the existing CBD (Central Business District) area of Singapore was selected for the study. Series of CFD simulations have been carried out using the software CFX-5.6. Wind tunnel experiments were also conducted for validation. It was found that at low wind speeds, the effect of materials on the air temperature was significant and the temperature at the middle of a narrow canyon increased up to 2.52°C with the façade material having lowest albedo.