Autonomous underwater vehicles in a hazardous non-deterministic environment

This research investigated the cooperation of multi underwater robots to perform a task. This combined engineering design, electronics and consensus control to create systems capable of achieving the task. Challenges such as underwater radio communications were researched and a simulation framework was created and tested on virtual and real systems.

An autonomous trimming system of large glass fiber reinforced plastics parts using an omni-directional mobile robot and its control

This paper describes an automated trimming system of large glass fiber reinforced plastic (GFRP) using an omni-directional wheeled mobile robot (WMR) and its path control method. In trimming GFRP parts, much glass fiber and plastic powder dust occur and it becomes bad visible in environment. It is necessary to correct dead-reckoning errors of the WMR in order to control its moving path. We have discussed an external correction method of the dead-reckoning errors for the WMR using ultrasonic sensor.

Comments on "Adaptive multiple-surface sliding control for non-autonomous systems with mismatched uncertainties"

This note points out that the time complexity of the main multiple-surface sliding control (MSSC) algorithm in Huang and Chen [Huang, A. C. & Chen, Y. C. (2004). Adaptive multiple-surface sliding control for non-autonomous systems with mismatched uncertainties. Automatica, 40(11), 1939-1945] is O(2^n). Here, we propose a simplified recursive design MSSC algorithm with time complexity O(n), and, using mathematical induction, we show that this algorithm agrees with this MSSC law.

Formation control of weak autonomous robots

Formation of autonomous mobile robots to an arbitrary geometric pattern in a distributed fashion is a fundamental problem in formation control. This paper presents a new fully distributed, memoryless (oblivious) algorithm to the formation control problem via distributed optimization techniques. The optimization minimizes an appropriately defined difference function between the current robot distribution and target geometric pattern. The optimization processes are performed independently by individual robots in their local coordinate system. A movement strategy derived from the results of the distributed optimizations guarantees that every movement makes the current robot configuration approaches the target geometric pattern until the final pattern is reached.

Insect based navigation and its applications to the autonomous control of mobile robots

Giving robots the ability to autonomously move around in various real-world environments has been a major goal of AI (artificial intelligence) for quite some time. To this end it is vital for robots to be able to perceive their surroundings in 3D; they must be able to estimate the range of obstacles in their path.

Animals navigate through various uncontrolled environments with seemingly little effort. Flying insects, especially, are quite adept at manoeuvring in complex, unpredictable and possibly hostile and hazardous environments.

In this paper it is shown that very simple motion cues, inspired by the visual navigation of flying insects, can be used to provide a mobile robot with the ability to successfully traverse a corridor environment. Equipping an autonomous mobile robot with the ability to successfully navigate real-word environments (in real-time) constitutes a major challenge for AI and robotics. It is in this area that insect based navigation has something to offer.

Insect inspired behaviours for the autonomous control of mobile robots

Animals navigate through various uncontrolled environments with seemingly little effort. Flying insects, especially, are quite adept at manoeuvring in complex, unpredictable and possibly hostile environments. Through both simulation and real-world experiments, we demonstrate the feasibility of equipping a mobile robot with the ability to navigate a corridor environment, in real time, using principles based on insect-based visual guidance. In particular we have used the bees’ navigational strategy of measuring object range in terms of image velocity. We have also shown the viability and usefulness of various other insect behaviours: (i) keeping walls equidistant, (ii) slowing down when approaching an object, (iii) regulating speed according to tunnel width, and (iv) using visual motion as a measure of distance travelled.

Adaptive fuzzy multi-surface sliding control of multiple-input and multiple-output autonomous flight systems

In this study, we proposed an adaptive fuzzy multi-surface sliding control (AFMSSC) for trajectory tracking of 6 degrees of freedom inertia coupled aerial vehicles with multiple inputs and multiple outputs (MIMO). It is shown that an adaptive fuzzy logic-based function approximator can be used to estimate the system uncertainties and an iterative multi-surface sliding control design can be carried out to control flight. Using AFMSSC on MIMO autonomous flight systems creates confluent control that can account for both matched and mismatched uncertainties, system disturbances and excitation in internal dynamics. It is proved that the AFMSSC system guarantees asymptotic output tracking and ultimate uniform boundedness of the tracking error. Simulation results are presented to validate the analysis.

Adaptive robust control of 6-DOF autonomous aerial vehicles

The thesis focused on development of an auto-pilot system for UAV’s and small fixed wing aircraft for use in hazardous flight conditions, such as severe weather. This led to development of a mathematical algorithm that unbinds the flight systems from coupling effects which can adaptively changed to the environment.

Spiking neural network-based target tracking control for autonomous mobile robots

In this paper, a target tracking controller based on spiking neural network is proposed for autonomous robots. This controller encodes the preprocessed environmental and target information provided by CCD cameras, encoders and ultrasonic sensors into spike trains, which are integrated by a three-layer spiking neural network (SNN). The outputs of SNN are generated based on the competition between the forward/backward neuron pair corresponding to each motor, with the weights evolved by the Hebbian learning. The application to target tracking of a mobile robot in unknown environment verifies the validity of the proposed controller.

Multi-surface sliding control of MIMO autonomous flight systems

In this paper, a multi-surface sliding control (MSSC) is proposed for trajectory tracking of 6 degrees of freedom (6-DOF) inertia coupled aerial vehicles with multiple inputs and multiple outputs (MIMO). It is shown that an iterative MSSC design can be carried out to control flight. Using MSSC on MIMO autonomous flight systems creates confluent control that can account for model mismatches, system uncertainties, system disturbances and excitation in internal dynamics. We prove that the MSSC system guarantees asymptotic output tracking and ultimate uniform boundedness of the system. Simulation results are presented to validate the analysis.

Multi-surface sliding control of MIMO autonomous flight systems

In this paper, we present a hardware in the loop simulation of our proposed multi-surface sliding control (MSSC) for trajectory tracking of 6 degrees of freedom (6-DOF) inertia coupled aerial vehicles with multiple inputs and multiple outputs (MIMO). Using MSSC on MIMO autonomous flight systems creates confluent control that can account for both matched and mismatched uncertainties, system disturbances and excitation in internal dynamics. The control law is implemented on an onboard computer and is validated though Hardware-In-the-Loop (HIL) simulations, between the hardware and the flight simulator X-Plane, which simulates the unmanned aircraft dynamics, sensors, and actuators. Simulation results are presented to validate the analysis.

Methodological and conceptual issues in the search for a relationship between animal body-size distributions and benthic habitat architecture

Benthic ecologists have studied the distribution of animal body sizes because it is a form of ‘taxon-free’ classification that may be a useful metric for describing variation within and between ecological communities. In particular, the idea that the allometry of physiological and life-history traits may control species composition and relative abundances implies a functional link between body-size distributions and communities. The physical structure of aquatic habitats has often been cited as the mechanism by which habitat may determine body-size distributions in communities. However, further progress is hindered by a lack of theoretical clarity regarding the mechanisms that connect body size to the characteristics of ecological communities, leading to methods that may obscure interesting trends in body-size data. This review examines the methodological and conceptual issues hindering progress in the search for a relationship between animal body size and habitat architecture and suggests ways to resolve these issues. Problems are identified with current methods for the measurement of animal body size, the data and measures used to quantify body-size distributions and the methods used to identify patterns therein. Fundamentally, renewed emphasis on the mechanisms by which animal body sizes are influenced by habitat architecture is required to refine methodology and synthesise results from pattern-seeking and mechanistic studies.

Terminal approach navigation for autonomous robots in a sensory network

In this paper we present a technique based on precision guidance approach for the sensor delivery and reception problem between two mobile robots. A slave robot is employed to collect sensors and slack them on a tray carried by the mobile master robot. We define the terminal attitude of the slave robot with respect to the master and present a LQR control approach to solving the problem of achieving a desired terminal approach angle necessary for the appropriate sensor delivery. The approach criteria is defined in terms of both minimizing the miss distance and controlling the slave robot's body attitude with respect to the master robot at the terminal point.