Pietro Bernini (1562-1629) : an investigation of the sculptor in the context of his time

An overview of the career of Pietro Bernini, identifying his style while challenging some interpretations and attributions. The sculptor is evaluated amidst a cultural and artistic circle that includes some hitherto ignored contemporaries. Light is cast upon the early career of his son Gian Lorenzo, the doyen of Baroque art.

A rapid test for heroin (3,6-Diacetylmorphine) based on two chemiluminescence reactions

A rapid method for screening drug seizure samples for 3,6-diacetylmorphine (heroin), which consists of a simple hydrolysis procedure and flow-injection analysis with two chemiluminescence reagents, is described. Before hydrolysis, 3,6-diacetylmorphine evokes an intense response with a tris(2,2'-bipyridyl)ruthenium(III) reagent (prepared by dissolving the perchlorate salt in acetonitrile), and a relatively weak chemiluminescence response with a second reagent: potassium permanganate in an aqueous acidic polyphosphate solution. However, the permanganate reagent is extremely sensitive toward the hydrolysis products of 3,6-diacetylmorphine (i.e., 6-monoacetylmorphine and morphine). Some compounds commonly found in drug laboratories may cause false positives with tris(2,2'-bipyridyl)ruthenium(III), but do not produce the markedly increased response with the permanganate reagent after the hydrolysis procedure. The combination of these two tests therefore provides an effective presumptive test for the presence of 3,6-diacetylmorphine, which we have verified with 14 samples obtained from a forensic science laboratory.

The determination of psilocin and psilocybin in hallucinogenic mushrooms by HPLC utilizing a dual reagent acidic potassium permanganate and tris(2,2´-bipyridyl)ruthenium(II) chemiluminescence detection system

This paper describes a procedure for the determination of psilocin and psilocybin in mushroom extracts using high-performance liquid chromatography with postcolumn chemiluminescence detection. A number of extraction methods for psilocin and psilocybin in hallucinogenic mushrooms were investigated, with a simple methanolic extraction being found to be most effective. Psilocin and psilocybin were extracted from a variety of hallucinogenic mushrooms using methanol. The analytes were separated on a C₁₂ column using a (95:5% v/v) methanol:10 mM ammonium formate, pH 3.5 mobile phase with a run time of 5 min. Detection was realized through a dual reagent chemiluminescence detection system of acidic potassium permanganate and tris(2,2'-bipyridyl)ruthenium(II). The chemiluminescence detection system gave improved detectability when compared with UV absorption at 269 nm, with detection limits of 1.2 × 10⁻⁸ and 3.5 × 10⁻⁹ mol/L being obtained for psilocin and psilocybin, respectively. The procedure was applied to the determination of psilocin and psilocybin in three Australian species of hallucinogenic mushroom.

Preliminary investigations into tris(2,2'-bipyridyl) ruthenium (III) as a chemiluminescent reagent for the detection of 3,6-diacetylmorphine (heroin) on surfaces

The use of tris(2,2'-bipyridyl) ruthenium (III) as a chemiluminescent spray reagent spot-test for heroin is discussed. Two forms of the reagent are investigated an aqueous and an anhydrous where both were found to give vastly different results. The aqueous reagent giving slow, low intensity chemiluminescence whilst the anhydrous reagent gave a fast, bright response in the presence of 3,6-diacetylmorphine. The anhydrous reagent is less sensitive the slow, intensity response is characteristic of only two opiates tested 3,6-diacetylmorphine and 3-monoacetylmorphine.

How much physical activity is enough to prevent unhealthy weight gain? Outcome of the IASO 1st Stock Conference and consensus statement

A consensus meeting was held in Bangkok, 21–23 May 2002, where experts and young scientists in the field of physical activity, energy expenditure and bodyweight regulation discussed the different aspects of physical activity in relation to the emerging problem of obesity worldwide. The following consensus statement was accepted unanimously.
‘The current physical activity guideline for adults of 30 minutes of moderate
intensity activity daily, preferably all days of the week, is of importance for
limiting health risks for a number of chronic diseases including coronary heart disease and diabetes. However for preventing weight gain or regain this guideline is likely to be insufficient for many individuals in the current environment. There is compelling evidence that prevention of weight regain in formerly obese individuals requires 60–90 minutes of moderate intensity activity or lesser amounts of vigorous intensity activity. Although definitive data are lacking, it seems likely that moderate intensity activity of approximately 45 to 60 minutes per day, or 1.7 PAL (Physical Activity Level) is required to prevent the transition to overweight or obesity. For children, even more activity time is recommended. A good approach for many individuals to obtain the recommended level of physical activity is to reduce sedentary behaviour by incorporating more incidental and leisure-time activity into the daily routine. Political action is imperative
to effect physical and social environmental changes to enable and encourage physical activity. Settings in which these environmental changes can be implemented include the urban and transportation infrastructure, schools, and workplaces.’

Traffic safety education and health promoting school : a metropolitan and rural pilot study

Traffic Safety Education (TSE) is an important part of a school's program; however, it competes with many other components of schooling such as literacy, numeracy and a number of health areas. Hence TSE provision in Victorian schools has been somewhat fragmented and haphazard in its delivery. This small pilot study involved two metropolitan and two rural schools which attempted to link TSE into mainstream school activities through the new Victorian Essential Learning Standards (VELS) utilising the internationally accepted Health Promoting Schools (HPS) framework.
The findings of the pilot study showed that though schools face many demands, understanding and ownership of TSE is possible when administrative support, professional development and adequate planning time are made available. The report outlines several key recommendations to improve the delivery of Traffic Safety Education in Victorian schools.

Ego boundaries, shamanic-like techniques, and subjective experience : an experimental study

The subjective effects and therapeutic potential of the shamanic practice of journeying is well known. However, previous research has neglected to provide a comprehensive assessment of the subjective effects of shamanic-like journeying techniques on non-shamans. Shamanic-like techniques are those that demonstrate some similarity to shamanic practices and yet deviate from what may genuinely be considered shamanism. Furthermore, the personality traits that influence individual susceptibility to shamanic-like techniques are unclear. The aim of the present study was, thus, to investigate experimentally the effect of shamanic-like techniques and a personality trait referred to as "ego boundaries" on subjective experience including mood disturbance. Forty-three non-shamans were administered a composite questionnaire consisting of demographic items and a measure of ego boundaries (i.e., the Short Boundary Questionnaire; BQ-Sh). Participants were randomly assigned to one of three conditions: listening to monotonous drumming for 15 minutes coupled with one of two sets of journeying instructions; or sitting quietly with eyes closed for 15 minutes. Participants' subjective experience and mood disturbance were retrospectively assessed using the Phenomenology of Consciousness Inventory (PCI) and the Profile of Mood States-Short Form, respectively. The results indicated that there was a statistically significant difference between conditions with regard to the PCI major dimensions of visual imagery, attention and rationality, and minor dimensions of imagery amount and absorption. However, the shamanic-like conditions were not associated with a major reorganization of the pattern of subjective experience compared to the sitting quietly condition, suggesting that what is typically referred to as an altered state of consciousness effect was not evident. One shamanic-like condition and the BQ-Sh subscales need for order, childlikeness, and sensitivity were statistically significant predictors of total mood disturbance. Implications of the findings for the anthropology of consciousness are also considered.

'I am, by God, fit for high positions' : on the political role of women in al-Andalus

Narrating and explaining the fairly emancipated women in al-Andalus has been fraught with ambiguity for the approximately one century of scholarship on the subject. There has been much stereotyping depending upon the investigator's particular perspective. This paper clarifies the roles of Andalusian women in political relations from the Muslim Conquest in 711 through the fall of Granada in 1492. The interpretations used in historiography pit a traditionalist trend, in which continuity from the pre 1slamic past is stressed, against the anti-continuist trend, in which an Oriental culture of the Muslims added the distinctive features of Iberian character today. In order to evaluate the two historiographic approaches, the contributions of seven prominent women are presented and evaluated for their social contexts during the eight centuries of al-Andalus. Comparisons are then made to prominent women in other political contexts within the Arab world in order to evaluate the strength of the two competing historiographic perspectives.

The role of osmiophilic bodies and Pfg377 expression in female gametocyte emergence and mosquito infectivity in the human malaria parasite plasmodium falciparum

Osmiophilic bodies are membrane-bound vesicles, found predominantly in Plasmodium female gametocytes, that become progressively more abundant as the gametocyte reaches full maturity. These vesicles lie beneath the subpellicular membrane of the gametocyte, and the release of their contents into the parasitophorous vacuole has been postulated to aid in the escape of gametocytes from the erythrocyte after ingestion by the mosquito. Currently, the only protein known to be associated with osmiophilic bodies in Plasmodium falciparum is Pfg377, a gametocyte-specific protein expressed at the onset of osmiophilic body development. Here we show by targeted gene disruption that Pfg377 plays a fundamental role in the formation of these organelles, and that female gametocytes lacking the full complement of osmiophilic bodies are significantly less efficient both in vitro and in vivo in their emergence from the erythrocytes upon induction of gametogenesis, a process whose timing is critical for fertilization with the short-lived male gamete. This reduced efficiency of emergence explains the significant defect in oocyst formation in mosquitoes fed blood meals containing Pfg377-negative gametocytes, resulting in an almost complete blockade of infection.

Enzymatic synthesis of isopropyl myristate using immobilized lipase from Bacillus cereus MTCC 8372

A purified alkaline thermo-tolerant bacterial lipase from Bacillus cereus MTCC 8372 was immobilized on a Poly (MAc- co -DMA- cl -MBAm) hydrogel. The hydrogel showed approximately 94% binding capacity for lipase. The immobilized lipase (2.36 IU) was used to achieve esterification of myristic acid and isopropanol in n -heptane at 65 °C under continuous shaking. The myristic acid and isopropanol when used at a concentration of 100 mM each in n -heptane resulted in formation of isopropyl myristate (66.0 ± 0.3 mM) in 15 h. The reaction temperature below or higher than 65°C markedly reduced the formation of isopropyl myristate. Addition of a molecular sieve (3 Å × 1.5 mm) to the reaction mixture drastically reduced the ester formation. The hydrogel bound lipase when repetitively used to perform esterification under optimized conditions resulted in 38.0 ± 0.2 mM isopropyl myristate after the 3 ^rd cycle of esterification.

Purification and characterization of a low molecular mass alkaliphilic lipase of Bacillus cereus MTCC 8372

A low molecular mass alkaliphilic extra-cellular lipase of Bacillus cereus MTCC 8372 was purified 35-fold by hydrophobic interaction (Octyl-Sepharose) chromatography. The purified enzyme was found to be electrophoretically pure by denaturing gel electrophoresis and possessed a molecular mass of approximately 8 kDa. It is a homopentamer of 40 kDa as revealed by native-PAGE. The lipase was optimally active at 55 °C and retained approximately half of its original activity after 40 min incubation at 55 °C. The enzyme was maximally active at pH 8.5. Mg ²⁺ , Cu ²⁺ , Ca ²⁺ , Hg ²⁺ , Al ³⁺ and Fe ³⁺ at 1 mM enhanced hydrolytic activity of the lipase. Interestingly, Hg ²⁺ ions synergized and Zn ²⁺ and Co ²⁺ ions antagonized the lipase activity. Among surfactants, Tween 80 promoted the lipase activity. Phenyl methyl sulfonyl fluoride (PMSF, 15 mM) decreased 98% of original activity of lipase. The lipase was highly specific towards p -nitrophenyl palmitate and showed a V _max and K _m of 0.70 mmol.mg ⁻¹ .min ⁻¹ and 32 mM for hydrolysis of p NPP.

Synthesis of ethyl acetate employing celite-immobilized lipase of Bacillus cereus MTCC 8372

A wide range of fatty acid esters can be synthesized by esterification and transesterification reactions catalyzed by lipases in non-aqueous systems. In the present study, immobilization of a purified alkaline extra-cellular lipase of Bacillus cereus MTCC 8372 by adsorption on diatomaceous earth (celite) for synthesis of ethyl acetate via transesterification route was investigated. B. cereus lipase was deposited on celite (77% protein binding efficiency) by direct binding from aqueous solution. Immobilized lipase was used to synthesis of ethyl acetate from vinyl acetate and ethanol in n -nonane. Various reaction conditions, such as biocatalyst concentration, substrates concentration, choices of solvents ( n -alkanes), incubation time, temperature, molecular sieves (3Å × 1.5 mm), and water activity(a _w ), were optimized. The immobilized lipase (25 mg/ml) was used to perform transesterification in n -alkane(s) that resulted in approximately 73.7 mM of ethyl acetate at 55 °C in n -nonane under shaking (160 rpm) after 15 h, when vinyl acetate and ethanol were used in a equimolar ratio (100 mM each). Addition of molecular sieves (3Å × 1.5 mm) as well as effect of water activity of saturated salt solutions (KI, KCl and KNO ₃ ) to the transesterification efficiency has inhibitory effect. Batch operational stability tests indicated that immobilized lipase had retained 50% of its original catalytic activity after four consecutive batches of 15 h each.

Microbial lipases : at the interface of aqueous and non-aqueous media: a review

In recent times, biotechnological applications of microbial lipases in synthesis of many organic molecules have rapidly increased in non-aqueous media. Microbial lipases are the working horses' in biocatalysis and have been extensively studied when their exceptionally high stability in non-aqueous media has been discovered. Stability of lipases in organic solvents makes them commercially feasibile in the enzymatic esterification reactions. Their stability is affected by temperature, reaction medium, water concentration and by the biocatalyst's preparation. An optimization process for ester synthesis from pilot scale to industrial scale in the reaction medium is discussed. The water released during the esterification process can be controlled over a wide range and has a profound effect on the activity of the lipases. Approaches to lipase catalysis like protein engineering, directed evolution and metagenome approach were studied. This review reports the recent development in the field of non-aqueous microbial lipase catalysis and factors controlling the esterification/transesterification processes in organic media.

Effect of moisture content on the physical properties of fibered flaxseed

The physical properties of fibered flaxseed were investigated within moisture content varying from 6.21 to 16.29%. The length, width, thickness and geometric mean diameter increased from 4.20 to 4.44mm, 1.99 to 2.13mm, 0.91 to 0.95mm, and 1.95 to 2.06mm, respectively in the moisture content range. One thousand seed weight increased linearly from 4.22 to 4.62g. The bulk density decreased from 726.783 to 611.872kg/m3, while the true density increased from 1165.265 to 1289.341kg/m3 in the moisture content range. The porosity values of flaxseed increased linearly from 37.67 to 52.54%. The highest static coefficient of friction was found on the plywood surface, while the lowest on the stainless steel surface. The static coefficient of friction increased from 0.467 to 0.972, 0.442 to 0.864, 0.492 to 0.927, and 0.490 to 0.845 for plywood, stainless steel, aluminum sheet and galvanized iron, respectively. The angle of repose increased linearly from 25.7° to 33.8° in the moisture content range. The results are necessary for design of equipment to handling, transportation, processing, and the storage of flaxseed.