Design of distributed adaptive neural traffic signal timing controller by cuckoo search optimization

This paper focuses on designing an adaptive controller for controlling traffic signal timing. Urban traffic is an inevitable part in modern cities and traffic signal controllers are effective tools to control it. In this regard, this paper proposes a distributed neural network (NN) controller for traffic signal timing. This controller applies cuckoo search (CS) optimization methods to find the optimal parameters in design of an adaptive traffic signal timing control system. The evaluation of the performance of the designed controller is done in a multi-intersection traffic network. The developed controller shows a promising improvement in reducing travel delay time compared to traditional fixed-time control systems.

Distributed power control in cellular mobile radio systems with time-varying link gains

A simple distributed power control algorithm for communication systems with mobile users and unknown time-varying link gains is proposed. We prove that the proposed algorithm is exponentially converging. Furthermore, we show that the algorithm significantly outperforms the well-known Foschini and Miljanic algorithm in the case of quickly moving mobile users.

Distributed power control in cellular mobile radio systems with time-varying link gains

A simple distributed power control algorithm for communication systems with mobile users and unknown timevarying link gains is proposed. We prove that the proposed algorithm is exponentially converging. Furthermore, we show that the algorithm significantly outperforms the well-known
Foschini and Miljanic algorithm in the case of quickly moving mobile users.

A new distributed power control formula in CDMA mobile networks

The paper presents a new fully distributed uplink power control method for CDMA systems. The power control algorithm calculates explicitly and assigns directly the desired mobile transmit powers achieving both maximum Carrier-to-Interference Ratio at the base station and minimum mobile energy consumption. Compared with the commonly known iterative power control algorithms, the direct assignment method is easier to implement and more power efficient.

An illumination invariant face recognition system for access control using video

Illumination and pose invariance are the most challenging aspects of face recognition. In this paper we describe a fully automatic face recognition system that uses video information to achieve illumination and pose robustness. In the proposed method, highly nonlinear manifolds of face motion are approximated using three Gaussian pose clusters. Pose robustness is achieved by comparing the corresponding pose clusters and probabilistically combining the results to derive a measure of similarity between two manifolds. Illumination is normalized on a per-pose basis. Region-based gamma intensity correction is used to correct for coarse illumination changes, while further refinement is achieved by combining a learnt linear manifold of illumination variation with constraints on face pattern distribution, derived from video. Comparative experimental evaluation is presented and the proposed method is shown to greatly outperform state-of-the-art algorithms. Consistent recognition rates of 94-100% are achieved across dramatic changes in illumination.

Healthy together Victoria and childhood obesity-a methodology for measuring changes in childhood obesity in response to a community-based, whole of system cluster randomized control trial

BACKGROUND: Healthy Together Victoria (HTV) - a complex 'whole of system' intervention, including an embedded cluster randomized control trial, to reduce chronic disease by addressing risk factors (physical inactivity, poor diet quality, smoking and harmful alcohol use) among children and adults in selected communities in Victoria, Australia (Healthy Together Communities).

OBJECTIVES: To describe the methodology for: 1) assessing changes in the prevalence of measured childhood obesity and associated risks between primary and secondary school students in HTV communities, compared with comparison communities; and 2) assessing community-level system changes that influence childhood obesity in HTC and comparison communities.

METHODS: Twenty-four geographically bounded areas were randomized to either prevention or comparison (2012). A repeat cross-sectional study utilising opt-out consent will collect objectively measured height, weight, waist and self-reported behavioral data among primary [Grade 4 (aged 9-10y) and Grade 6 (aged 11-12y)] and secondary [Grade 8 (aged 13-14y) and Grade 10 (aged 15-16y)] school students (2014 to 2018). Relationships between measured childhood obesity and system causes, as defined in the Foresight obesity systems map, will be assessed using a range of routine and customised data.

CONCLUSION: This research methodology describes the beginnings of a state-wide childhood obesity monitoring system that can evolve to regularly inform progress on reducing obesity, and situate these changes in the context of broader community-level system change.

Terminal sliding mode control strategy design for second-order nonlinear system

This study mainly focuses on the terminal sliding mode control (TSMC) strategy design, including an adaptive terminal sliding mode control (ATSMC) and an exact-estimator-based terminal sliding mode control (ETSMC) for second-order nonlinear dynamical systems. In the ATSMC system, an adaptive bound estimation for the lump uncertainty is proposed to ensure the system stability. On the other hand, an exact estimator is designed for exact estimating system uncertainties to solve the trouble of chattering phenomena caused by a sign function in ATSMC law in despite of the utilization of a fixed value or an adaptive tuning algorithm for the lumped uncertainty bound. The effectiveness of the proposed control schemes can be verified in numerical simulations.

Adaptive data based neural network leader-follower control of multi-agent networks

In this paper, we propose a data based neural network leader-follower control for multi-agent networks where each agent is described by a class of high-order uncertain nonlinear systems with input perturbation. The control laws are developed using multiple-surface sliding control technique. In particular, novel set of sliding variables are proposed to guarantee leader-follower consensus on the sliding surfaces. Novel switching is proposed to overcome the unavailability of instantaneous control output from the neighbor. By utilizing RBF neural network and Fourier series to approximate the unknown functions, leader-follower consensus can be reached, under the condition that the dynamic equations of all agents are unknown. An O(n) data based algorithm is developed, using only the network’s measurable input/output data to generate the distributed virtual control laws. Simulation results demonstrate the effectiveness of the approach.

Adaptive fast finite-time multiple-surface sliding control for a class of uncertain non-linear systems

This paper concerns the adaptive fast finite-time multiple-surface sliding control (AFFTMSSC) problem for a class of high-order uncertain non-linear systems of which the upper bounds of the system uncertainties are unknown. By using the fast control Lyapunov function and the method of so-called adding a power integrator merging with adaptive technique, a recursive design procedure is provided, which guarantees the fast finite-time stability of the closed-loop system. Further, it is proved that the control input is bounded.

Adaptive fuzzy multi-surface sliding control of multiple-input and multiple-output autonomous flight systems

In this study, we proposed an adaptive fuzzy multi-surface sliding control (AFMSSC) for trajectory tracking of 6 degrees of freedom inertia coupled aerial vehicles with multiple inputs and multiple outputs (MIMO). It is shown that an adaptive fuzzy logic-based function approximator can be used to estimate the system uncertainties and an iterative multi-surface sliding control design can be carried out to control flight. Using AFMSSC on MIMO autonomous flight systems creates confluent control that can account for both matched and mismatched uncertainties, system disturbances and excitation in internal dynamics. It is proved that the AFMSSC system guarantees asymptotic output tracking and ultimate uniform boundedness of the tracking error. Simulation results are presented to validate the analysis.

Nonlinear excitation control of synchronous generators based on adaptive backstepping method

n this paper, the design of a nonlinear excitation control of a synchronous generator is presented where the generator is connected to a single machine infinite bus (SMIB) system. An adaptive backstepping method is used to design the excitation controller with an objective of enhancing the overall dynamic stability of the SMIB system under different contingencies. In this paper, two types of contingencies are considered- i) unknown parameters and physical quantities during the controller design process and ii) controller performance evaluation under different system configurations such as three-phase short circuit faults. The adaption law, which is mainly based on the formulation of Lyapunov function, is used to estimate the unknown parameters which guarantee the convergence of different physical quantities of synchronous generators, e.g., the relative speed, terminal voltage, etc. The effectiveness of the proposed scheme is evaluated under different system configurations as mentioned in the second contingency and compared to that of an existing adaptive backstepping controller and a conventional power system stabilizer (PSS). Simulation results demonstrate the superiority of the proposed control scheme over the existing controllers.

A robust adaptive hybrid force/position control scheme of two planar manipulators handling an unknown object interacting with an environment

This paper presents a robust hybrid force/position control scheme of two cooperative manipulators handling an unknown object interacting with an unknown environment. The uncertainty of the object is considered in the weight, length, and the position of centre of mass (COM). The environment is assumed to have an unknown but high stiffness. A hybrid force/position control algorithm is designed for the known system and environment case. The exponential convergence of the position and the interaction force with the environment is proved using the Lyapunov direct method. Similarly, in the unknown object and environment case, and in the presence of bounded disturbances on the robots and the object, an adaptive sliding mode hybrid force/position control scheme is designed. The asymptotic convergence of the object's position and the constraint force is guaranteed using the proposed control methodology. The internal forces and moments between the object and robots are controlled independently of the object's motion and environmental interaction forces. Simulation results confirm the performance and effectiveness of the suggested control methodologies.

Protecting web applications from DDoS attacks by an active distributed defense system

In the last a few years a number of highly publicized incidents of Distributed Denial of Service (DDoS) attacks against high-profile government and commercial websites have made people aware of the importance of providing data and services security to users. A DDoS attack is an availability attack, which is characterized by an explicit attempt from an attacker to prevent legitimate users of a service from using the desired resources. This paper introduces the vulnerability of web applications to DDoS attacks, and presents an active distributed defense system that has a deployment mixture of sub-systems to protect web applications from DDoS attacks. According to the simulation experiments, this system is effective in that it is able to defend web applications against attacks. It can avoid overall network congestion and provide more resources to legitimate web users.

Robust control applied to metal spraying for rapid tooling

The spray forming process is a novel method of rapidly manufacturing tools and dies for stamping and injection operations. The process sprays molten tool steel from a set of arc spray guns onto a ceramic former to build up a thick steel shell. The volumetric contraction that occurs as the steel cools is offset by a volumetric expansion taking place within the sprayed steel, which allows the dimensional accurate tools to be produced. To ensure that the required phase transformation takes place, the temperature of the steel is regulated during spraying. The sprayed metal acts both as a source of mass and a source of heat and by adjusting the rate at which metal is sprayed; the surface temperature profile over the surface of the steel can be controlled. The temperature profile is measured using a thermal imaging camera and regulated by adjusting the rate at which the guns spray the steel. Because the temperature is regulated by adjusting the feed rate to an actuator that is moving over the surface, this is an example of mobile control, which is a class of distributed parameter control. The dynamic system has been controlled using a PI controller before. The paper describes the application of H∞ tracking type controller as the desire was for the average temperature to follow a desired profile. A study on the controllability of the underlying system was aimed at.