The influence of heat treatment on the corrosion behaviour of as-spun amorphous Al88Ni6La6 alloy in 0.01 M NaCl solution

The effect of the heat treatment on the corrosion behaviour of amorphous Al₈₈Ni₆La₆ made by melt-spun has been investigated by electrochemical measurements. Heat treatment was carried out at 523 K and 673 K for 4 min and 15 min respectively. The evolution of the crystallization process after annealing was identified by differential scanning calorimeter (DSC) as well as X-ray diffraction. The XRD patterns show that the structure of samples heat-treated at higher temperature changes towards a crystal state. The results obtained from the polarization curves reveal that all Al₈₈Ni₆La₆ alloys exhibit spontaneously passivated behaviour. Furthermore, it is noted that the partially crystallized alloy has the best corrosion resistance in comparison with as-spun amorphous and fully crystallized alloys, while the fully crystallized sample shows deterioration in the corrosion resistance.

Impact of the Pick and Tick food information program on the salt content of food in New Zealand

The Pick the Tick programme of the National Heart Foundation of New Zealand aims to provide a framework for cooperation with the food industry to improve nutrition labelling and to develop a healthy food supply. Food manufacturers, whose products meet defined nutritional criteria, are able to display the Pick the Tick logo on food labels. The tick is used by 59% of shoppers in assisting them make healthy food choices. Food companies are encouraged to reformulate product composition if they fail to meet criteria and develop new products to specifically meet the Pick the Tick criteria. The objective of this study was to evaluate the impact of the programme on food formulation. The main outcome measure was the amount of salt not added to food products. Changes to sodium levels were multiplied by the volume of sales and then converted to salt in tonnes to provide a tangible measure of the impact of the programme. In a 1-year period, July 1998 to June 1999, Pick the Tick influenced food companies to exclude ~33 tonnes of salt through the reformulation and formulation of 23 breads, breakfast cereals and margarine. Breakfast cereals showed the largest reduction in sodium content by an average of 378 mg sodium per 100 g product (61%). Bread was reduced by an average of 123 mg per 100 g product (26%) and margarine by 53 mg per 100 g (11%). Pick the Tick appeals to the food industry as a tool for marketing food products and has provided an incentive to improve the nutritional value of foods. The tick on approved products not only acts as a ‘nutrition signpost’ for consumers but can also significantly influence the formulation of products without sacrificing taste or quality.

What have we learnt? Pre-service music teaching and learning

Making pre-service teacher education relevant to teaching through onsite visits is not new to tertiary institutions in Australia. "The merits of field based teacher education are frequently cited, concluding increased relevance for students and greater accountability for colleges through participation of local schools" (Elmore, 1979, p. 378). This article reports on a Deakin University initiative with a local school in semester one 2008 with the Bachelor of Teaching (Primary and Secondary) music methodology students. The school chosen has a specialist music teacher. Conkling (2007) points out, "when the experienced music teacher presents a compelling vision of music teaching, pre-service teachers not only attend to this exemplar of teaching practice, but they also recognize the influences of teaching practices on younger students learning" (p. 45). This article explores the concept of school based partnerships and professional development as a way to enhance pre-service music methodology students understanding of teaching and learning. This article highlights some of our reflections during our five-week visit. We discuss the benefits of the experience from the point of view of a university student and a music education lecturer. Whilst such an experience had benefits for the school and the university, we also highlight some limitations that were encountered.

Hypoallergenic variants of the major latex allergen Hev b 6.01 retaining human T lymphocyte reactivity

Hev b 6.01 is a major allergen of natural rubber latex with sensitization of 70–86% of latex glove-allergic subjects. Recently, we mapped the immunodominant T cell sites of Hev b 6.01 to the highly IgE-reactive hevein (Hev b 6.02) domain. Hev b 6.01 contains 14 cysteine residues with multiple disulphide bridges stabilizing tertiary conformation. With the goal of a standardized specific immunotherapy we developed hypoallergenic Hev b 6.01 mutants by site-directed mutagenesis of selected cysteine residues (3, 12, 17, and 41) within the Hev b 6.02 domain. Peptides corresponding to the Hev b 6.02 domain of two of the mutants were also synthesized. These mutants and peptide variants showed markedly decreased or ablated latex-allergic patient serum IgE binding by immunoblotting and ELISA. Basophil activation testing confirmed markedly decreased activation with successive cysteine substitutions of the mutants and complete abrogation with the Hev b 6.02 (Cys 3, 12, 17, 41 Ala) peptide. Retention of T cell reactivity is crucial for effective specific immunotherapy and all mutants and peptide variants maintained their latex-specific T cell reactivity. The ablated allergenicity but retained T cell reactivity of the Hev b 6.02 (Cys 3, 12, 17, 41 Ala) peptide suggests this peptide is a suitable candidate for inclusion in a latex immunotherapy preparation.

Hysterectomy trends in australia between--2000/01 and 2004/05

Background: Hysterectomy is a major and common surgical procedure that has the potential to provide relief from ongoing gynaecological problems, but is often associated with negative impacts on health and wellbeing. Research indicates that hysterectomy rates and trends vary widely between and within countries; yet little is known about patterns in Australia.

Aims: This research aimed to describe hysterectomy rates and trends in Australia between 2000/01 and 2004/05.

Methods: This repeat cross-sectional study used routinely collected data from all hospitals in Australia. Data on all women admitted to hospital for a hysterectomy were obtained from the National Hospital Morbidity Database (2000/01–2004/05). Data were analysed by calculating population rates for each type of hysterectomy. Incidence rate ratios were calculated to assess changes over time.

Results: Hysterectomy rates in Australia declined from 34.8 per 10 000 women in 2000/01 to 31.2 per 10 000 women in 2004/05. A decline in the incidence rate for abdominal hysterectomy (from 18.7 to 15.1 per 10 000 women) and the incidence rate for concurrent oophorectomy (from 12.4 to 11.3 per 10 000 women) were also observed during this time period. At each point in time, the highest incidence rates for hysterectomy were for women aged 45–54 years.

Conclusions: Hysterectomy rates in Australia are declining over time and currently appear to be lower than most other countries. More hysterectomies are performed vaginally than in Canada, the USA, the UK and Finland and the rate of concurrent oophorectomy is less than that reported in the USA and the UK.

Agitate loop 01

Agitate Loop 1 is an instrumental piece featuring some experimental sounds (a crystal wine glass being tapped and a plastic wrapper being ripped and processed) and more traditional sounds piano/guitar and synths (several pads and a drum beat) put together to create an atmosphere of tension.

Agitate short 01

Agitate Short 01 is an instrumental piece featuring some experimental sounds (a crystal wine glass being tapped and a plastic wrapper being ripped and processed) and more traditional sounds piano/guitar and synths (several pads and a drum beat) put together to create an atmosphere of tension.

Alien (excerpt 01)

Alien Excerpt 01 is an instrumental piece using synth sounds to create an eerie science fiction feel.

Allelujah loop 01

Allelujah Loop 01 is a cinematic and New Age piece that also fits well with projects of a religious or spiritual theme; Christmas and Easter included or any other religious celebration where Allelujah gives praise. It centers on a female vocal singing Alleluia, with violin, cello, piano, harp and 2 synths and bells at the very end.

Allelujah short 01

Allelujah Short 01is a cinematic and New Age piece that also fits well with projects of a religious or spiritual theme; Christmas and Easter included. It centers on a female vocal singing Alleluia, with violin, cello, piano, harp and 2 synths and bells at the very end.

Allelujah vocal 01

Allelujah Vocal 01 is a short vocal piece featuring a female voice singing Allelujah.

Ave 01 DREAMY RELIGIOUS

Ave 01 is a recording of a singer singing Ave with bells for instrumentation.

Bass line rock loop 01

Bass Line Rock Loop 01 is a simple bass, electric guitar and drum loop in the style of Rock Pop.

Enzyme-assisted self-assembly under thermodynamic control

The production of functional molecular architectures through self-assembly is commonplace in biology, but despite advances^{1, 2, 3}, it is still a major challenge to achieve similar complexity in the laboratory. Self-assembled structures that are reproducible and virtually defect free are of interest for applications in three-dimensional cell culture^{4, 5}, templating⁶, biosensing⁷ and supramolecular electronics⁸. Here, we report the use of reversible enzyme-catalysed reactions to drive self-assembly. In this approach, the self-assembly of aromatic short peptide derivatives^{9, 10} provides a driving force that enables a protease enzyme to produce building blocks in a reversible and spatially confined manner. We demonstrate that this system combines three features: (i) self-correction—fully reversible self-assembly under thermodynamic control; (ii) component-selection—the ability to amplify the most stable molecular self-assembly structures in dynamic combinatorial libraries^{11, 12, 13}; and (iii) spatiotemporal confinement of nucleation and structure growth. Enzyme-assisted self-assembly therefore provides control in bottom-up fabrication of nanomaterials that could ultimately lead to functional nanostructures with enhanced complexities and fewer defects.

X-ray diffraction line broadening from gold and platinum thin films

X-ray diffraction line profile analysis has been used to study the microstructure of (Ill) oriented gold and platinum thin films deposited by thermal evaporation and DC magnetron sputtering. In addition to crystallite size broadening, the profiles from these films displayed broadening arising from dislocations. A parallel investigation, using transmission electron microscopy (TEM) was undertaken to study the nature of dislocations formed, and to provide information on the dimensions of the crystallite columns in the films. X-ray data were collected at room temperature to determine the anisotropy of the broadening with (hkl), using a Siemens D5000 powder diffractometer (CuKa radiation) and two high-resolution synchrotron instruments (BM 16 at the ESRF [A=0.35A] and station 2.3 at the Daresbury laboratory. Two approaches to instrument deconvolution were investigated; Fourier deconvolution and fundamental parameters profile fitting, using Lab6 as a reference material to determine the instrument profile function. After removal of the crystallite size broadening contribution from the measured integral breadths, the residual microstrain broadening was modelled assuming dislocations based on a FCC a/2<110>{ Ill} slip system. The results of the X-ray analysis agreed with dark field TEM micrographs, which showed that many of the crystallites contained dislocations of mixed character (screw- edge).