Enhancing the carbon yield of cellulose based carbon fibres with ionic liquid impregnates

Here we show that ionic liquids (ILs), protic or aprotic in nature containing a phosphate anion, can be used as effective impregnating compounds resulting in a 50% improvement of the carbon yield of cellulose based carbon fibres and a 70 °C reduction in the onset of the depolymerization temperature. Using 13C NMR and FTIR spectra, we characterize the carbonized fibres with and without IL impregnates. The oxidative step in the formation of carbon fibres from cellulose precursors is very important in determining the final material properties, as such we examine this stage and show that the IL reduces the onset of the cellulose depolymerization temperature while improving the oxidative stability. This study highlights the ability of ILs to act as novel impregnates which can successfully reduce the formation of tar and volatile substances during carbonization of cellulose based carbon fibres resulting in an improved carbon yield and significant cost savings due to reduced maintenance and wear of equipment. This journal is

Use of geographical information systems as a tool for predicting fish yield in tropical reservoirs : case study on Sri Lankan reservoirs

Use of geographical information systems (GIS) in inland fisheries has hitherto been essentially restricted to site evaluation for aquaculture development and assessment of limnological changes in time and space in individual water bodies. The present GIS study was conducted on the land-use pattern of the catchments of nine reservoirs in Sri Lanka, for which detailed fishery data, viz. yield, fishing intensity, landing size of major constituent species, together with selected limnological data such as conductivity and chlorophyll-a, were available. Potential statistical relationships (linear, curvilinear, exponential and second-order polynomial) of fish yield (FY, in kg ha−1 yr−1) to different land-use patterns, such as forest cover (FC, in km2) and shrub-land (SL, in km2), either singly, or in combination, and/or the ratio of each land type to reservoir area (RA in km2) and reservoir capacity (RC in km3), were explored. Highly significant relationships were evident between FY to the ratio of SL and/or FC+SL to RA and/or RC. Similarly, the above land-use types to RA and RC ratios were significantly related to limnological features of the reservoirs. The relationships of FY to various parameters obtained in this study were much better correlated than those relationships of FY to limnological and biological parameters used in yield prediction in tropical and temperate lacustrine waters previously.

Effect of initial processing on the microstructure-property relationships in bake-hardened C-Mn-Si TRIP steels

The effect of pre-straining (PS) and bake-hardening (BH) on the microstructure and mechanical properties has been studied in C-Mn-Si TRansformation Induced Plasticity (TRIP) steels after: (i) thermomechanically processing (TMP) and (ii) intercritical annealing. The steels were characterised before and after PS/BH by transmission electron microscopy (TEM), X-ray diffraction (XRD), and tensile tests. The main microstructural differences were the higher volume fraction of bainite and more stable retained austenite in the TMP steel. This led to a difference in the strain-hardening behavior before and after BH treatment. The higher dislocation density in ferrite and formation of microbands in the TMP steel after PS and the formation of Fe3C carbides between the bainitic ferrite laths during BH for both steels also affected the strain-hardening behavior. However, both steels after PS/BH treatment demonstrated an increase in the yield and tensile strength.

Evaluation of the robustness of predictive yield models based on catchment characteristics using GIS for reservoir fisheries in Sri Lanka

Land-use patterns in the catchment areas of Sri Lankan reservoirs, which were quantified using Geographical Information Systems (GIS), were used to develop quantitative models for yield prediction. The validity of these models was evaluated through the application to five reservoirs that were not used in the development of the models, and by comparing with the actual fish yield data of these reservoirs collected by an independent body. The robustness of the predictive models developed was tested by principal component analysis (PCA) on limnological characteristics, land-use patterns of the catchments and fish yields. The predicted fish yields in five Sri Lankan reservoirs, using the empirical models based on the ratios of forest cover and/or shrub cover to reservoir capacity or reservoir area were in close agreement with the observed fish yields. The scores of PCA ordination of productivity-related limnological parameters and those of land-use patterns were linearly related to fish yields. The relationship between the PCA scores of limnological characteristics and land-use types had the appropriate algebraic form, which substantiates the influence of the limnological factors and land-use types on reservoir fish yields. It is suggested that the relatively high predictive power of the models developed on the basis of GIS methodologies can be used for more accurate assessment of reservoir fisheries. The study supports the importance and the need for an integrated management strategy for the whole watershed to enhance fish yields.

TOF-SIMS analysis using C60. Effect of impact energy on yield and damage

C₆₀ has been shown to give increased sputter yields and, hence, secondary ions when used as a primary particle in SIMS analysis. In addition, for many samples, there is also a reduction in damage accumulation following continued bombardment with the ion beam. In this paper, we report a study of the impact energy (up to 120 keV) of C₆₀ on the secondary ion yield from a number of samples with consideration of any variation in yield response over mass ranges up to m/z 2000. Although increased impact energy is expected to produce a corresponding increase in sputter yield/rate, it is important to investigate any increase in sample damage with increasing energy and, hence, efficiency of the ion beams. On our test samples including a metal, along with organic samples, there is a general increase in secondary ion yield of high-mass species with increasing impact energy. A corresponding reduction in the formation of low-mass fragments is also observed. Depth profiling of organic samples demonstrates that when using C₆₀, there does not appear to be any increase in damage evident in the mass spectra as the impact energy is increased.

Fabrication of carbon nanofiber by pyrolysis of freeze-dried cellulose nanofiber

The possibility of fabricating carbon nanofibers from cellulose nanofibers was investigated. Cellulose nanofiber of ~50 nm in diameter was produced using ball milling in an eco-friendly manner. The effect of the drying techniques of cellulose nanofibers on the morphology of carbon residue was studied. After pyrolysis of freeze-dried cellulose nanofibers below 600 °C, amorphous carbon fibers of ~20 nm in diameter were obtained. The pyrolysis of oven-dried precursors resulted in the loss of original fibrous structures. The different results arising from the two drying techniques are attributed to the difference in the spatial distance between cellulose nanofiber precursors.

Preparation and characterization of graphitic carbon nitride through pyrolysis of melamine

Graphitic carbon nitride (g-C₃N₄) has been synthesized via a two-step pyrolysis of melamine (C₃H₆N₆) at 800°C for 2 h under vacuum conditions. X-ray diffraction (XRD) patterns strongly indicate that the synthesized sample is g-C₃N₄. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) morphologies indicate that the product is mainly composed of graphitic carbon nitride. The stoichiometric ratio of C:N is determined to be 0.72 by elemental analysis (EA). Chemical bonding of the sample has been investigated by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). Electron energy loss spectroscopy (EELS) verifies the bonding state between carbon and nitrogen atoms. Optical properties of the g-C₃N₄ were investigated by PL (photoluminescence) measurements and UV–Vis (ultraviolet–visible) absorption spectra. We suppose its luminescent properties may have potential application as component of optical nanoscale devices. Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) were also performed.

High-pressure spectroscopic study of hydrous and anhydrous Cs-exchanged natrolites

Structural phase transitions in hydrous Cs-exchanged natrolite (Cs-NAT-hyd) and anhydrous Cs-exchanged natrolite (Cs-NAT-anh) have been investigated as a function of pressure and temperature using micro-Raman scattering and synchrotron infrared (IR) spectroscopy with pure water as the penetrating pressure medium. The spectroscopic results indicate that Cs-NAT-hyd undergoes a reversible phase transition around 4.72 GPa accompanied by the discontinuous frequency shifts of the breathing vibrational modes of the four-ring and helical eight-ring units of the natrolite framework. On the other hand, we observe that Cs-NAT-anh becomes rehydrated at 0.76 GPa after heating to 100 °C and then transforms into two distinctive phases at 2.24 and 3.41 GPa after temperature treatments at 165 and 180 °C, respectively. Both of these high-pressure phases are characterized by the absence of the helical eight-ring breathing modes, which suggests the collapse of the natrolite channel and formation of dense high-pressure polymorphs. Together with the fact that these high-pressure phases are recoverable to ambient conditions, our results imply a novel means for radionuclide storage utilizing pressure and a porous material.

Analysis of strengthening in AA6111 during the early stages of aging: atom probe tomography and yield stress modelling

In this work, a series of aging treatments has been conducted on AA6111 alloy samples for various times at ambient temperature (so-called natural aging) and at temperatures between 60 and 180 °C (artificially aged). The time at artificial ageing was chosen such that samples with approximately the same yield stress were produced. The microstructures of these alloy samples have been carefully characterized using atom probe tomography together with advanced cluster-finding techniques in order to obtain quantitative information about the changes in distribution of both the solute clusters and early-stage precipitates that are formed. The size distribution of clusters has been mapped onto the glide plane and then the stress necessary for a dislocation to pass through the range of obstacles has been estimated using an areal glide model where the dislocation–obstacle interaction strength has been assumed to be related to the obstacle size on the glide plane. It is demonstrated that the contribution of cluster strengthening during artificial aging at higher temperatures is dominated by the high number density of small clusters (Guinier radius <1 nm), whereas the situation during room temperature natural aging is more complex.

Synthesis and structural properties of Anhydrous Rare Earth Cinnamates, [RE(cinn)3]

Anhydrous rare earth tris(cinnamates) [RE(cinn)3] (RE = La–Lu, Y and Sc and cinnH = trans-cinnamic acid) were prepared by metathesis in water and by direct reaction of the metal with cinnamic acid in a 1,2,4,5-tetramethylbenzene flux at ca. 200 °C. X-ray crystal structure determinations and X-ray powder data show that, in the solid state, the larger lanthanoids (La–Dy) form an isomorphous polymeric series consisting of homoleptic nine-coordinate metal centres bonded to three chelating and bridging tridentate cinnamates. The late REIII cinnamate (RE = Dy, Ho–Lu, Y) complexes also form linear one-dimensional polymeric chains with all RE metal atoms being seven-coordinate. The cinnamates are either bound tridentate bridging in a μ-η2:η1 fashion, or μ-η1:η1syn-syn bidentate bridging. A structural break occurs at dysprosium which has been characterised in both crystallographic forms, and gives solely the late RE form when precipitated at 80 °C. ScIII cinnamate was also isolated as an analytically pure precipitate which was, again, found to be anhydrous in nature. A structural change was identified by powder XRD between the late REIII cinnamates and ScIII cinnamate.

Thermal and rheological characteristics of biobased carbon fiber precursor derived from low molecular weight organosolv lignin

In the present work, electrospinnability as well as thermal, rheological, and morphological characteristics of low molecular weight hardwood organosolv lignin, as a potential precursor for carbon fiber, was investigated. Submicromter biobased fibers were electrospun from a wide range of polymer solutions with different ratios of organosolv lignin to polyacrylonitrile (PAN). Rheological studies were conducted by measuring viscosity, surface tension, and electrical conductivity of hybrid polymer solutions, and used to correlate electrospinning behavior of solutions with the morphology of the resultant electrospun composite fibers. Using scanning electron microscopy (SEM) images, the solutions that led to the formation of bead-free uniform fibers were found. Differential scanning calorimetry (DSC) analysis revealed that lignin-based fibers enjoy higher decomposition temperatures than that of pure PAN. Thermal stability of the lignin-based fibers was investigated by thermogravimetric analysis (TGA) indicating a high carbon yield of above 50% at 600 °C, which is highly crucial in the production of low-cost carbon fiber. It was also observed that organosolv lignin synergistically affects thermal decomposition of composite fibers. A significant lower activation energy was found for the pyrolysis of lignin-derived electrospun fibers compared to that of pure PAN.

Yield optimization of a heterologously expressed novel mouse macrophage protein

The large scale whole-genome sequencing projects have resulted in large numbers of un-characterized and un-annotated protein sequences. This presents an opportunity and a challenge to characterise these novel protein sequences. Structural biology has become a widely accepted methodology to help assign functions to such proteins, complementing other cellular and biochemical studies. However, most of these studies require the target protein to be produced in large quantities and in a highly pure and soluble state. The present study is an attempt to maximise production of a recombinant mouse macrophage protein (rMMP) over-expressed heterologously in Escherichia coli. Highest production of biomass and total protein (6.6 mg mL-1) was observed at 37 °C. Maximum cell disruption (89%) was observed during freeze-thawing and subsequent ultrasonication.

Cleavage of Ru-C(aryl) bond of a four-membered ortho-metalated ruthenium(II) organometallics by mercaptopyrimidine and pyridine-2,6-dicarboxylate ligands: spectroscopic, structural and computational studies

The heterogeneous phase reaction of Ru(η2-RL)(PPh3)2(CO)Cl (1) with 2-mercaptopyrimidine(pymSH) and pyridine-2,6-dicarboxylate(dipic) ligands afforded the complexes of the type Ru(PPh3)(CO)(pymS)2 (2) and Ru(PPh3)2(CO)(dipic) (3) in excellent yield respectively. The chelation of pymS/dipic is attended with the cleavage of Ru-O, Ru-Cl and Ru-C(aryl) bonds and the RL ligand is no longer coordinated with the metal center in the products. The spectral (UV-Vis, IR, 1H NMR) and electrochemical data of the complexes are included. In dichloromethane solution both 2 and 3 display one quasi-reversible RuIII/RuII cyclic voltammetric response with E1/2 in the range 1.15-1.50 V vs Ag/AgCl. Structure determinations of 2 and the solvate 3·CH3CN have revealed distorted octahedral RuCN2S2P coordination sphere for 2 and RuCNO2P2 coordination sphere for 3·CH3CN. For 2 the pairs (P, N), (S, S) and (C, N) define the three trans directions whereas for 3·CH3CN those pairs are (P, P), (C, N) and (O, O). The electronic structures and the absorption spectra of 2 and 3 are also scrutinized by the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) analysis.