Development of a cooling fabric from conducting polymer coated fibres: proof of concept

It is supposed that there should be a thermal electric effect if a dc current is applied across two dissimilar conducting polymers, similar to so called “Peltier effect” in metals or semiconductors. However, this hypothesis has not been tested on conducting polymers and using these materials to make cooling fabrics has never been attempted before. Polypyrrole coated fabrics were used to test the hypothesis in this preliminary study. Seebeck and the Peltier effects were proven to exist. However, thermoelectricity effect between two conducting polymer coated fabric samples was only about 10 μV/°C. Cooling effect by conductive polymer powder was achieved but performance was unsteady due to electrical degradation of the conducting polymer. Nevertheless, the concept was demonstrated and the development of a cooling fabric is possible.

Individual, social and home environment determinants of change in children's television viewing: the Switch-Play intervention

Understanding potential determinants of change in television (TV) viewing among children may enhance the effectiveness of programs targeting this behaviour. This study aimed to investigate the contribution of individual, social and home environment factors among 10-year-old Australian children to change in TV viewing over a 21-month period. A total of 164 children (49% boys) completed a 19-lesson (9-month) intervention program to reduce TV viewing time. Children completed self-administered surveys four times over 21 months (pre- and post-intervention, 6- and 12-month follow-up). Baseline factors associated with change in TV viewing during the intervention and follow-up periods were: ‘asking parents ≥once/week to switch off the TV and play with them’ (21.6 min/day more than those reporting <once/week, p = 0.007); being able to ‘watch just 1 h of TV per day’ (26.1 min/day less than those who could not, p = 0.010); ‘watching TV no matter what was on’ (36.6 min/day more than those who did not, p < 0.001); and ‘continuing to watch TV after their program was over’ (33.0 min/day more than those who did not, p = 0.006). With every unit increase in baseline frequency of TV viewing with family and friends, children spent on average 4.0 min/day more watching TV over the 21-month period (p = 0.047). Baseline number and placement of TVs at home did not predict change in children's TV viewing over the 21 months. Greater understanding of the family dynamics and circumstances, as well as the individual and social determinants of TV viewing, will be required if we are to develop effective strategies for reducing TV viewing in children.

Randomised controlled trial evaluating lifestyle interventions in people with impaired glucose tolerance

Aim

To evaluate the effectiveness of lifestyle interventions in people with impaired glucose tolerance (IGT).
Methods

Participants with IGT (n = 78), diagnosed on two consecutive oral glucose tolerance tests (OGTTs), were randomly assigned to a 2-year lifestyle intervention or to a control group. Main outcome measures were changes from baseline in: nutrient intake; physical activity; anthropometry, glucose tolerance and insulin sensitivity. Measurements were repeated at 6, 12 and 24 months follow-up.
Results

After 24 months follow-up, there was a significant fall in total fat consumption (difference in change between groups (Δ intervention − Δ control) = −17.9, 95% confidence interval (CI) −33.6 to −2.1 g/day) as a result of the intervention. Body mass was significantly lower in the intervention group compared with controls after 6 months (−1.6, 95% CI −2.9 to −0.4 kg) and 24 months (−3.3, 95% CI −5.7 to −0.89 kg). Whole body insulin sensitivity, assessed by the short insulin tolerance test (ITT), improved after 12 months in the intervention group (0.52, 95% CI 0.15–0.89%/min).
Conclusions

These findings complement the findings of the Finnish Diabetes Prevention Study and the American Diabetes Prevention Study, both of which tested intensive interventions, by showing that pragmatic lifestyle interventions result in improvements in obesity and whole body insulin sensitivity in individuals with IGT, without change in other cardiovascular risk factors.

Association of genetic vatiation within UBL5 with phenotypes of metabolic syndrome

The BEACON gene was initially identified using the differential display polymerase chain reaction on hypothalamic mRNA samples collected from lean and obese Psammomys obesus, a polygenic animal model of obesity. Hypothalamic BEACON gene expression was positively correlated with percentage of body fat, and intracerebroventricular infusion of the Beacon protein resulted in a dose-dependent increase in food intake and body weight. The human homolog of BEACON, UBL5, is located on chromosome 19p in a region previously linked to quantitative traits related to obesity. Our previous studies showed a statistically significant association between UBL5 sequence variation and several obesity- and diabetes-related quantitative physiological measures in Asian Indian and Micronesian cohorts. Here we undertake a replication study in a Mexican American cohort where the original linkage signal was first detected. We exhaustively resequenced the complete gene plus the putative promoter region for genetic variation in 55 individuals and identified five single nucleotide polymorphisms (SNPs), one of which was novel. These SNPs were genotyped in a Mexican American cohort of 900 individuals from 40 families. Using a quantitative trait linkage disequilibrium test, we found significant associations between UBL5 genetic variants and waist-to-hip ratio (p = 0.027), and the circulating concentrations of insulin (p = 0.018) and total cholesterol (p = 0.023) in fasted individuals. These data are consistent with our earlier published studies and further support a functional role for the UBL5 gene in influencing physiological traits that underpin the development of metabolic syndrome.

The response of the natriuretic peptide system to water deprivation in the desert rodent, Notomys alexis

Natriuretic peptides (NPs) are regulatory molecules that cause cGMP-mediated diuresis and natriuresis in mammals. Accordingly, it is interesting to consider their role in desert-adapted animals in which water is often limited. This study investigated the response of the natriuretic peptide (NP) system to varying periods of water deprivation (WD) in the Australian desert rodent species, Notomys alexis. It was hypothesised that the expression of the NP system will be down-regulated in water-deprived N. alexis compared to water-replete animals. The plasma levels of ANP were significantly reduced after 3 days of WD, but were unaffected by 7, 14 and 28 days of WD. Water deprivation for 3, 7, 14 days had a variable effect on the mRNA expression of ANP, CNP, NPR-A, NPR-B, and NPR-C, and a uniform down-regulation was not observed. However, after 28 days of WD, mRNA expression was similar to water-replete animals, except for NPR-A. Surprisingly, 7 and 14 days of WD caused an up-regulation in the ability of ANP to stimulate cGMP; this also occurred at 14 days for CNP. Taken together, the mRNA expression and peptide mediated guanylyl cyclase activity data after WD were in the opposite direction to what was predicted. Interestingly, after 28 days of WD, most parameters were similar to those of water-replete animals, which indicates that a down-regulation of the NP system is not part of the physiological response to an absence of free water in N. alexis.

Lipid characterisation and distribution in the fillet of the farmed Australian native fish, Murray cod (Maccullochella peelii peelii)

The objective of this study was to determine the distribution pattern of lipids and fatty acids in different tissues of farmed Murray cod (Maccullochella peelii peelii).

Differences in lipid content were found amongst different portions of the fillet, being lowest in the dorsal/cranial portion (P1) and highest in the more ventral/caudal portion (P8) (P < 0.05). The latter also recorded the highest amount of monounsaturated fatty acid (MUFA) and the lowest in polyunsaturated fatty acids (PUFA), arachidonic acid, 20:4n − 6 (ArA), docosahexaenoic acid, 22:6n − 3, (DHA) and the n3/n6 ratio. In general, lipid content in the different fillet portions was inversely correlated to PUFA and directly to MUFA. Contents of saturated fatty acids (SFA) and eicosapentaenoic acid, 20:5n − 3 (EPA) did not show any discernible trends in the different fillet portions, while significant differences in contents of DHA and ArA were observed. This study shows that lipid deposition in Murray cod varies markedly and that different fatty acids are deposited differently throughout the fillet.

The dietary, physical activity and sedentary behaviours of Victorian regional secondary school students

The aim of this study was to investigate the dietary, physical activity and sedentary behaviours of adolescents from four secondary schools in Warrnambool, regional Victoria. In 2004, a random sample of students (n=712), stratified by school year level, was generated from school enrolment databases and 443 students completed a lifestyle questionnaire. Twenty per cent of students were physically active for 60 minutes or more per day; 28 per cent used electronic media in free time for a maximum of two hours per day. Only seven per cent of students met these two Australian physical activity recommendations. Fruit, vegetables and dairy products were consumed every day by 39 per cent, 40 per cent and 71 per cent of students respectively; three serves per day of each of these foods are recommended for Australian adolescents. Compared with boys, girls were less physically active (p<0.001), consumed more fruit (p=0.011) and vegetables (p<0.001), but fewer dairy products (p<0.024). Seventeen per cent of students were overweight or obese; these students were less physically active than normal weight peers (p<0.018). The dietary, physical and sedentary behaviours of regional Victorian secondary school students in this study were inadequate when compared with Australian recommendations. Dietary and physical activity habits are still evolving in adolescence and unhealthy habits can still be changed.

Precipitate characterisation of an advanced high-strength low-alloy (HSLA) steel using atom probe tomography

Increased fuel economy, combined with the need for the improved safety has generated the development of new hot-rolled high-strength low-alloy (HSLA) and multiphase steels such as dual-phase or transformation-induced plasticity steels with improved ductility without sacrificing strength and crash resistance. However, the modern multiphase steels with good strength-ductility balance showed deteriorated stretch-flangeability due to the stress concentration region between the soft ferrite and hard martensite phases [1]. Ferritic, hot-rolled steels can provide good local elongation and, in turn, good stretch-flangeability [2]. However, conventional HSLA ferritic steels only have a tensile strength of not, vert, similar600 MPa, while steels for the automotive industry are now required to have a high tensile strength of not, vert, similar780 MPa, with excellent elongation and stretch-flangeability [1]. This level of strength and stretch-flangeability can only be achieved by precipitation hardening of the ferrite matrix with very fine precipitates and by ferrite grain refinement. It has been suggested that Mo [3] and Ti [4] should be added to form carbides and decrease the coiling temperature to 650 °C since only a low precipitation temperature can provide the precipitation refinement [4]. These particles appeared to be (Ti, Mo)C, with a cubic lattice and a parameter of 0.433 nm, and they were aligned in rows [4]. It was reported [4] that the formation of these very fine carbides led to an increase in strength of not, vert, similar300 MPa. However, the detailed analysis of these particles has not been performed to date due to their nanoscale size. The aim of this work was to carry out a detailed investigation using atom probe tomography (APT) of precipitates formed in hot-rolled low-carbon steel containing additions Ti and Mo.

The investigated low-carbon steel, containing Fe–0.1C–1.24Mn–0.03Si–0.11Cr–0.11Mo–0.09Ti–0.091Al at.%, was produced by hot rolling. The processing route has been described in detail elsewhere [5] European Patent Application, 1616970 A1, 18.01.2006.[5]. The microstructure was characterised by transmission electron microscopy (TEM) on a Philips CM 20, operated at 200 kV using thin foil and carbon replica techniques. Qualitative energy dispersive X-ray spectroscopy (EDXS) was used to analyse the chemical composition of particles. The atomic level of particle characterisation was performed at the University of Sydney using a local electrode atom probe [6]. APT was carried out using a pulse repetition rate of 200 kHz and a 20% pulse fraction on the sample with temperature of 80 K. The extent of solute-enriched regions (radius of gyration) and the local solute concentrations in these regions were estimated using the maximum separation envelope method with a grid spacing of 0.1 nm [7]. A maximum separation distance between the atoms of interest of dmax = 1 nm was used.

The microstructure of the steel consisted of two types of fine ferrite grains: (i) small recrystallised grains with an average grain size of 1.4 ± 0.2 μm; and (ii) grains with a high dislocation density (5.8 ± 1.4 × 1014 m−2) and an average grain size of 1.9 ± 0.1 μm in thickness and 2.7 ± 0.1 μm in length (Fig. 1a). Some grains with high dislocation density displayed an elongated shape with Widmanstätten side plates and also the formation of cells and subgrains (Fig. 1a). The volume fraction of recrystallised grains was 34 ± 8%.

Secretion of the glucose-regulated selenoprotein SEPS1 from hepatoma cells

SEPS1 (also called selenoprotein S, SelS, Tanis or VIMP) is a selenoprotein, localized predominantly in the ER membrane and also on the cell surface. In this report, we demonstrate that SEPS1 protein is also secreted from hepatoma cells but not from five other types of cells examined. The secretion can be abolished by the ER-Golgi transport inhibitor Brefeldin A and by the protein synthesis inhibitor cycloheximide. Using a sandwich ELISA, SEPS1 was detected in the sera of 65 out of 209 human subjects (31.1%, average = 15.7 ± 1.1 ng/mL). Fractionation of human serum indicated that SEPS1 was associated with LDL and possibly with VLDL. The function of plasma SEPS1 is unclear but may be related to lipoprotein metabolism.

Genetic variation in BEACON influences quantitative variation in metabolic syndrome-related phenotypes

The BEACON gene (also known as UBL5) was identified as differentially expressed between lean and obese Psammomys obesus, a polygenic animal model of obesity, type 2 diabetes, and dyslipidemia. The human homologue of BEACON is located on chromosome 19p, a region likely to contain genes affecting metabolic syndrome–related quantitative traits as established by linkage studies. To assess whether the human BEACON gene may be involved in influencing these traits, we exhaustively analyzed the complete gene for genetic variation in 40 unrelated individuals and identified four variants (three novel). The two more common variants were tested for association with a number of quantitative metabolic syndrome–related traits in two large cohorts of unrelated individuals. Significant associations were found between these variants and fat mass (P = 0.026), percentage of fat (P = 0.001), and waist-to-hip ratio (P = 0.031). The same variants were also associated with total cholesterol (P = 0.024), LDL cholesterol (P = 0.019), triglycerides (P = 0.006), and postglucose load insulin levels (P = 0.018). Multivariate analysis of these correlated phenotypes also yielded a highly significant association (P = 0.0004), suggesting that BEACON may influence phenotypic variation in metabolic syndrome–related traits.

Mitochondrial DNA diversity of broodstock of two indigenous mahseer species, Tor tambroides and T. douronensis (Cyprinidae) cultured in Sarawak, Malaysia

Tor tambroides and T. douronensis, locally referred to as empurau and semah, respectively, are high valued mahseer species, indigenous to Sarawak, East Malaysia, with an aquaculture potential and of conservational value. Direct sequencing of mitochondrial DNA (mtDNA) 16S rRNA gene region (542 bp) was used to investigate genetic variation of T. tambroides and T. douronensis broodstock collected from different geographic locations in Sarawak and maintained at the Indigenous Fish Research and Production Center (IFRPC), Tarat, Sarawak, Malaysia. A total of 11 unique haplotypes were identified, of which six were detected in T. tambroides, and five in T. douronensis. Overall, nucleotide diversity (π) was low, ranging from 0.000 to 0.006, and haplotype diversity (h) ranged from 0.000 to 0.599. Although the analysis failed to detect genetic variation amongst populations of T. tambroides (significant pairwise FST was found for only one test, but pairwise haplotype frequencies were not statistically significant), substantial inter-population divergence among T. douronensis was recognised, especially those originating from different river systems (pairwise F_ST = 0.754 to 1.000, P < 0.05). Fixed haplotype differences were found in one population of T. douronensis. Average nucleotide divergence between T. tambroides and T. douronensis was 0.018, similar to the amount recognised between T. tambroides and the outgroup T. khudree (0.017). In addition, phylogenetic analysis revealed that the T. douronensis mtDNA consisted of two highly divergent clusters (0.020), one of which is more closely related to T. tambroides rather than with the other group of haplotypes of the conspecifics. The findings from the present study have important implications for aquaculture, management and conservation of these two species. The data also raise some concerns regarding the taxonomic status of T. douronensis, which needs to be addressed.

The influence of polymerization time and dopant concentration on the absorption of microwave radiation in conducting polypyrrole coated textiles

Temperature changes in conducting polypyrrole/para-toluene-2-sulphonic acid (PPy/pTSA) coated nylon textiles due to microwave absorption in the 8–9 GHz and 15–16 GHz frequency ranges were obtained by a thermography station during simultaneous irradiation of the samples. The temperature values are compared and related to the amounts of reflection, transmission and absorption obtained with a non-contact free space transmission technique, indicating a relationship between microwave absorption and temperature increase. Non-conductive samples showed no temperature increase upon irradiation irrespective of frequency range. The maximum temperature difference of around 4 °C in the conducting fabrics relative to ambient temperature was observed in samples having 48% absorption and 26.5 ± 4% reflection. Samples polymerized for 60 or 120 min with a dopant concentration of 0.018 mol/l or polymerized for 180 min with a dopant concentration of 0.009 mol/l yielded optimum absorption levels. As the surface resistivity decreased and the reflection levels increased, the temperature increase upon irradiation reduced.

Effect of heat-treatment atmosphere on the bond strength of apatite layer on Ti substrate

Objectives
The purpose of this study was to investigate the bond strength of apatite layer on titanium (Ti) substrate coated by biomimetic method and to improve the bonding of apatite layer to Ti substrate by optimizing the alkali heat-treatment process.

Methods
Ti plates pre-treated with an alkali solution of 10 M sodium hydroxide (NaOH) were heat-treated at 600 °C for 1 h at different atmospheres: in air and in vacuum. A dense apatite layer formed on top of the sodium titanate layer after soaking the alkali and heat-treated Ti samples in simulated body fluid (SBF) for up to 3 weeks. The bond strengths of the sodium titanate layer on Ti substrate, and apatite layer on the sodium titanate layer, were measured, respectively, by applying a tensile load. The fracture sites were observed with a scanning electron microscope (SEM).

Results
The apatite layer on the substrate after alkali heat-treatment in air achieved higher bond strength than that on the substrate after alkali heat-treatment in vacuum. It was found that the interfacial structure between the sodium titanate and Ti substrate has a significant influence on the bond strength of the apatite layer.

Significance
It is advised that titanium implants can achieve better osseointegration under load-bearing conditions by depositing an apatite layer in vivo on a Ti surface subjected to alkali and heat-treated in air.

Re-examination of the effect of NbC precipitation on shape memory in Fe-Mn-Si-based alloys

Current literature pertaining to the shape memory effect in the Fe–Mn–Si-based system is critically discussed. It is argued that the
enhanced shape memory previously attributed to NbC precipitation is mainly due to the associated thermo-mechanical treatments.
It is concluded that the thermo-mechanical processing of the alloy is the dominant factor that determines the shape memory effect in
this alloy system.