Small-signal stability assessment of active distribution networks with dynamic loads

This paper investigates small-signal stability of a distribution system with distributed generator and induction motor load, as a dynamic element. The analysis is carried out over a distribution test system with different types of induction motor loads. The system is linearised by the perturbation method. Eigenvalues and participation factors are calculated to see the modal interaction of the system. The study indicates that load voltage dynamics significantly influence the damping of a newly identified voltage mode. This mode has frequency of oscillation between the electromechanical and subsynchronous oscillation of power systems. To justify the validity of the modal analysis time domain simulation is also carried out. Finally, significant parameters of the system that affect the damping and frequency of the oscillation are identified.

Dynamic load variation and stability analysis in distribution networks with distributed generators

In this paper, the modeling of the distribution network is done in a different way where the distributed generator and dynamic loads are considered. Based on this modeling, this paper presents an analysis to investigate the dynamic and static load variation effect on the distribution network. Graphical interface industry software is used to conduct all the aspects of model implementation and carry out the extensive simulation studies. Here also focuses on the worst case scenario and the different fault effect on the generator. Finally, this paper presents the voltage profile for different penetration with different network configurations.

Impact of SCIG and DFIG type wind turbine on the stability of distribution networks: Static and dynamic aspects

This paper presents potential barriers to integrate the squirrel cage induction generator (SCIG) and doubly fed induction generator (DFIG) type wind turbine in distribution networks. The analysis is carried out over a 16 bus distribution test system. Both static and dynamic analyses are performed to see the impact of two different generators on the distribution system. The simulation results show that both SCIG and DFIG type wind turbines have significant impact on the static voltage stability, power loss, and dynamic behavior of the system, which should be taken into account to improve systems performance before integrating wind generation in existing distribution networks.

Occupant behaviour simulation for cellular offices in early design stages - Architectural and modelling considerations

Building simulation is most useful and most difficult in early design stages. Most useful since the optimisation potential is large and most difficult because input data are often not available at the level of resolution required for simulation software. The aim of this paper is to addresses this difficulty, by analysing the predominantly qualitative information in early stages of an architectural design process in search for indicators towards quantitative simulation input. The discussion in this paper is focused on cellular offices. Parameters related to occupancy, the use of office equipment, night ventilation, the use of lights and blinds are reviewed based on simulation input requirements, architectural considerations in early design stages and occupant behaviour considerations in operational stages. A worst and ideal case scenario is suggested as a generic approach to model occupant behaviour in early design stages when more detailed information is not available. Without actually predicting specific occupant behaviour, this approach highlights the magnitude of impact that occupants can have on comfort and building energy performance and it matches the level of resolution of available architectural information in early design stages. This can be sufficient for building designers to compare the magnitude of impact of occupants with other parameters in order to inform design decisions. Potential indicators in early design stages towards the ideal or worst case scenario are discussed.

Reliable multicast with pipelined network coding using opportunistic feeding and routing

Multicast is an important mechanism in modern wireless networks and has attracted significant efforts to improve its performance with different metrics including throughput, delay, energy efficiency, etc. Traditionally, an ideal loss-free channel model is widely used to facilitate routing protocol design. However, the quality of wireless links is affected or even jeopardized resulting in transmission failures by many factors like collisions, fading or the noise of environment. In this paper, we propose a reliable multicast protocol, called CodePipe, with energy-efficiency, high throughput and fairness in lossy wireless networks. Building upon opportunistic routing and random linear network coding, CodePipe can not only eliminate coordination between nodes, but also improve the multicast throughput significantly by exploiting both intra-batch and inter-batch coding opportunities. In particular, four key techniques, namely, LP-based opportunistic routing structure, opportunistic feeding, fast batch moving and inter-batch coding, are proposed to offer significant improvement in throughput, energy-efficiency and fairness.Moreover, we design an efficient online extension of CodePipe such that it can work in a dynamic network where nodes join and leave the network as time progresses. We evaluate CodePipe on ns2 simulator by comparing with other two state-of-art multicast protocols,MORE and Pacifier. Simulation results show that CodePipe significantly outperforms both of them.

Dynamic cloud service selection using an adaptive learning mechanism in multi-cloud computing

Cloud service selection in a multi-cloud computing environment is receiving more and more attentions. There is an abundance of emerging cloud service resources that makes it hard for users to select the better services for their applications in a changing multi-cloud environment, especially for online real time applications. To assist users to efficiently select their preferred cloud services, a cloud service selection model adopting the cloud service brokers is given, and based on this model, a dynamic cloud service selection strategy named DCS is put forward. In the process of selecting services, each cloud service broker manages some clustered cloud services, and performs the DCS strategy whose core is an adaptive learning mechanism that comprises the incentive, forgetting and degenerate functions. The mechanism is devised to dynamically optimize the cloud service selection and to return the best service result to the user. Correspondingly, a set of dynamic cloud service selection algorithms are presented in this paper to implement our mechanism. The results of the simulation experiments show that our strategy has better overall performance and efficiency in acquiring high quality service solutions at a lower computing cost than existing relevant approaches.

Managerial entrenchment and firm value: a dynamic perspective

We examine the impact of managerial entrenchment on firm value using a dynamic model with firm fixed effects. To estimate the model, we employ the long-difference technique, which is shown by our simulation to deliver the least biased estimates. Based on a large sample of U.S. companies, we document a significantly negative and causal effect of managerial entrenchment on firm value after taking into account omitted variables, reverse causality, and highly persistent endogenous variables. Additional analysis suggests that the causality running from managerial entrenchment to firm value is more pronounced than that for reverse causality.

A comparative study of different power system stabilizers for dynamic stability analysis

Power system stabilizers (PSSs) are extensively used to ensure the dynamic stability of power systems through the modulation of excitation signals supplied to synchronous generators. This paper presents a comparative study of two different PSSs: STAB1 and IEEEST. The stabilizers are designed for the linearized model of a single machine infinite bus (SMIB) system with different loads. Both time-and frequency-domain simulations are carried out to investigate the performance of these stabilizers. For all PSSs, the time-domain simulations are performed by applying a three-phase short-circuit fault at the terminal of the synchronous generator. These simulation results are compared against the open-loop characteristics of the SMIB system where no PSS is implemented. Simulation results demonstrate that the speed-fed PSS provides more damping as compared to frequency- and power-fed stabilizers.

Development of a dynamic surface roughness monitoring system based on artificial neural networks (ANN) in milling operation

Dynamic surface roughness prediction during metal cutting operations plays an important role to enhance the productivity in manufacturing industries. Various machining parameters such as unwanted noises affect the surface roughness, whatever their effects have not been adequately quantified. In this study, a general dynamic surface roughness monitoring system in milling operations was developed. Based on the experimentally acquired data, the milling process of Al 7075 and St 52 parts was simulated. Cutting parameters (i.e., cutting speed, feed rate, and depth of cut), material type, coolant fluid, X and Z components of milling machine vibrations, and white noise were used as inputs. The original objective in the development of a dynamic monitoring system is to simulate wide ranges of machining conditions such as rough and finishing of several materials with and without cutting fluid. To achieve high accuracy of the resultant data, the full factorial design of experiment was used. To verify the accuracy of the proposed model, testing and recall/verification procedures have been carried out and results showed that the accuracy of 99.8 and 99.7 % were obtained for testing and recall processes.

CISR-ODE, A C plus plus framework with ODE solver for code based system dynamics simulation

Ordinary differential equations are used for modelling a wide range of dynamic systems. Even though there are many graphical software applications for this purpose, a fully customised solution for all problems is code-level programming of the model and solver. In this project, a free and open source C++ framework is designed to facilitate modelling in native code environment and fulfill the common simulation needs of control and many other engineering and science applications. The solvers of this project are obtained from ODEINT and specialised for Armadillo matrix library to provide an easy syntax and a fast execution. The solver code is minimised and its modification for users have become easier. There are several features added to the solvers such as controlling maximum step size, informing the solver about sudden input change and forcing custom times into the results and calling a custom method at these points. The comfort of the model designer, code readability, extendibility and model isolation have been considered in the structure of this framework. The application manages the output results, exporting and plotting them. Modifying the model has become more practical and a portion of corresponding codes are updated automatically. A set of libraries is provided for generation of output figures, matrix hashing, control system functions, profiling, etc. In this paper, an example of using this framework for a classical washout filter model is explained.

Consensus building in a local context for the AHP-GDM with the individual numerical scale and prioritization method

The methodology for selecting the individual numerical scale and prioritization method has recently been presented and justified in the analytic hierarchy process (AHP). In this study, we further propose a novel AHP-group decision making (GDM) model in a local context (a unique criterion), based on the individual selection of the numerical scale and prioritization method. The resolution framework of the AHP-GDM with the individual numerical scale and prioritization method is first proposed. Then, based on linguistic Euclidean distance (LED) and linguistic minimum violations (LMV), the novel consensus measure is defined so that the consensus degree among decision makers who use different numerical scales and prioritization methods can be analyzed. Next, a consensus reaching model is proposed to help decision makers improve the consensus degree. In this consensus reaching model, the LED-based and LMV-based consensus rules are proposed and used. Finally, a new individual consistency index and its properties are proposed for the use of the individual numerical scale and prioritization method in the AHP-GDM. Simulation experiments and numerical examples are presented to demonstrate the validity of the proposed model.

Dynamic access point association using software defined networking

Previous attempts in addressing Access Point (AP) association at overlapping zone of IEEE 802.11 networks have shown some issues. They work passively and estimate load from different network metrics such as frame delay, packet loss, number of users etc. that may not always true. Further the user behaviour is selfish i.e. illegitimate user consume high network resources. This adversely affect existing or new users which in turn motivates them to change locations. To alleviate these issues, we propose the use of a Software Defined Networking (SDN) enabled client side (wireless end user) solution. In this paper, we start by proposing a dynamic AP selection algorithm/framework in wireless user device. The device receive network resource related statistics from SDN Controller and guide the client device to associate itself with the best selected AP. We justify that the use of SDN discourage users to act selfishly. Further, a mathematical modelling of the proposed scheme is derived using Fuzzy membership function and the simulation is carried out. Results obtained from simulation necessitates to implement SDN enabled client side methods.

Distributed multi-agent scheme to improve dynamic voltage stability of distribution networks

In this paper, a distributed multi-agent scheme is presented for reactive power management with renewable energy sources (RESs). The multi-agent system (MAS) framework is developed for distribution systems to improve the stability which is mostly dominated by voltage and the agents in this framework coordinate among themselves using online information and energy flow. In this paper, the agents basically perform two tasks- reactive power estimation and necessary control actions. The topology of distribution network is used to estimate the required reactive power for maintaining voltage stability where distributed static synchronous compensators (DSTATCOMs) are used to supply this reactive power. The DSTATCOM is controlled by using a linear quadratic regulator (LQR) controller within the agent framework. The proposed scheme is further compared with the conventional approach to validate the simulation results.