The impact of ionic liquids on amyloid fibrilization of AB16-22 : tuning the rate of fibrilization using a reverse Hofmeister strategy

We have shown that the amyloid fibrilization of Aß16-22 follows a reverse hofmeister trend in pILs. Fast fibrilization rates of seconds can be achieved.

Formation and dissolution of hen egg white lysozyme amyloid fibrils in protic ionic liquids

The formation of amyloid fibrils from non-disease-related proteins demonstrates that any protein can adopt this “rogue” form; we show that it is possible to use protic ionic liquids to fibrilize hen egg white lysozyme, and then subsequently to dissolve the fibrils with up to 72% restoration of enzymatic activity.

The "refoldability" of selected proteins in ionic liquids as a stabilization criterion, leading to a conjecture on biogenesis

The folding of proteins is usually studied in dilute aqueous solutions of controlled pH, but it has recently been demonstrated that reversible unfolding can occur in other media. Particular stability is conferred on the protein (folded or unfolded) when the process occurs in ‘protic ionic liquids’ (pILs) of controlled proton activity. This activity (‘effective pH’) is determined by the acid and base components of the pIL and is characterized in the present study by the proton chemical shift of the N–H proton. Here we propose a ‘refoldability’ or ‘refolding index’ (RFI) metric for assessing the stability of folded biomolecules in different solvent media, and demarcate high RFI zones in hydrated pIL media using ribonuclease A and hen egg white lysozyme as examples. Then we show that, unexpectedly, the same high RFIs can be obtained in pIL media that are 90% inorganic in character (simple ammonium salts). This leads us to a conjecture related to the objections that have been raised to ‘primordial soup’ theories for biogenesis, objections that are based on the observation that all the bonds involved in biomacromolecule formation are hydrolyzed in ordinary aqueous solutions unless specifically protected. The ingredients for primitive ionic liquids (NH3, CO, HCN, CO2, and water) were abundant in the early earth atmosphere, and many experiments have shown how amino acids could form from them also. Cyclical concentration in evaporating inland seas could easily produce the type of ambient-temperature, non-hydrolyzing, media that we have demonstrated here may be hospitable to biomolecules, and that may be actually encouraging of biopolymer assembly. Thus a plausible variant of the conventional ‘primordial soup’ model of biogenesis is suggested.

Parallel developments in aprotic and protic ionic liquids : physical chemistry and applications

This Account covers research dating from the early 1960s in the field of low-melting molten salts and hydrates,which has recently become popular under the rubric of “ionic liquids”. It covers understanding gained in the principal author’s laboratories (initially in Australia, but mostly in the U.S.A.) from spectroscopic, dynamic, and thermodynamic studies and includes recent applications of this understanding in the fields of energy conversion and biopreservation. Both protic and aprotic varieties of ionic liquids are included, but recent studies have focused on the protic class because of the special applications made possible by the highly variable proton activities available in these liquids.

Double layer structure of ionic liquids at the Au(111) electrode interface : an atomic force microscopy investigation

The double layer structure of two ionic liquids (ILs), 1-butyl-1- methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate ([Py ₁,₄]FAP) and 1-ethyl-3-methylimidazolium tris(pentafluoroethyl) trifluorophosphate ([EMIm]FAP) at the polarized Au(111) electrode interface is probed using Atomic Force Microscopy force measurements. The force-separation profiles suggest a multilayered morphology is present at the electrified Au(111)-IL interface, with more near surface layers detected at higher potentials. At the (slightly negative) open circuit potential, multiple ion layers are present, and the innermost layer, in contact with the Au(111) surface, is enriched in the cation due to electrostatic adsorption. Upon applying negative electrode potentials (-1.0 V, -2.0 V), stronger IL near surface structure is detected: both the number of ion layers and the force required to rupture these layers increases. Positive electrode potentials (+1.0 V, +2.0 V) also enhance IL near surface structure, but not as much as negative potentials, because surface-adsorbed anions are less effective at templating structure in subsequent layers than cations. This interfacial structure is not consistent with a double layer in the Stern-Gouy-Chapman sense, as there is no diffuse layer. The structure is consistent with a capicitative double-layer model, with a very small separation distance between the planes of charge.

Electrochemistry at negative potentials in Bis(trifluoromethanesulfonyl)amide ionic liquids

The bis(trifluoromethanesulfonyl)amide (TFSA) anion is widely studied as an ionic liquid (IL) forming anion which imparts many useful properties, notably electrochemical stability. Here we present electrochemical and spectroscopic evidence indicating that reductive decomposition of the bis(trifluoromethanesulfonyl)amide (TFSA) anion begins at ~ −2.0 V vs. Fc+/Fc, well before the reported cathodic limit for many of these ILs. These processes are shown to be dependent upon the electrode substrate and are influenced by the water content of the IL. Supporting ab initio calculations are presented which suggest a possible mechanism for the anion decomposition. The products appear to passivate the electrode surface and the implications of this behaviour are discussed.

Measurement of forces due to structure in hydrocarbon liquids

Direct measurements of the force between two molecularly smooth mica sheets immersed in cyclohexane show not a monotonic van der Waals attraction, but an oscillatory function of distance, where the spacing between successive minima corresponds to the molecular diameter of cyclohexane. As surface separation increases the oscillations become less pronounced, and beyond 5 nm (typically seven or eight oscillations) they are no longer detected. These results accord with theoretical ideas on structural forces resulting from the inhomogeneous arrangement of molecules of the liquid near the solid surface. In n-octane the force law does not show the same pronounced oscillations, except at very small separations where repulsive barriers are found. These are attributed to the difficulty of removing the last layers of adsorbed molecules of the liquid from the mica surfaces, and they reduce the mice-mica adhesion significantly. Small amounts of water in the hydrocarbon liquids condense to form a bridge between the surfaces at small separations, causing a very strong adhesion between them. Some implications of these results for the stability of colloids in organic media are discussed.

Anodising AA5083 aluminium alloy using ionic liquids

Aluminium, as the current collector in lithium batteries, has shown reduced corrosion susceptibility in room temperature molten salts (1, 2). Moreover, previous studies have established that corrosion mitigation is achieved on magnesium alloys using ionic liquids pretreatments (3, 4). This paper investigated the anodisation of AA5083 aluminium alloy in Trihexyl(tetradecyl)phosphonium bis(trifluoromethylsulfony) ([P6,6,6,14][NTf2]) ionic liquid by applying a constant current followed by holding at the maximum potential for a period of time. Potentiodynamic polarisation results show that the treated surfaces were more corrosion resistant in 0.1 M sodium chloride solution compared with the control specimen. The anodising treatment was effective both in shifting the free corrosion potential to more noble values and in suppressing the corrosion current. Optical microscope and optical profilometry images indicated that an anodising film was deposited onto the alloy surface, which is thought to have inhibited corrosion in chloride environment. Further characterisation of the anodising film will be carried out in future work.

Novel biorenewable plastics based on natural resources using ionic liquids

We report biorenewable plastics developed from natural resources such as cellulose, wool and microorganismsynthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) copolymer [1-3]. Novel materials were prepared by blending these natural polymers in an ionic liquid green solvent, 1-butyl-3-methylimidazolium chloride. Cellulose /PHBV blend materials were successfully prepared in this way. The ionic liquid was completely recycled with high yield and purity after the processing. The blend materials can be processed into different solid forms such as films, noodle-like fibers and bulk blocks. It was found that there exists hydrogen bonding interaction between the components which facilities the mixing of these polymers. The cellulose/PHBV blend materials all show phase-separated structure as revealed by micro ATR-FTIR imaging (Figure 1) and scanning electron microscopy (SEM). The PHBV domains of 6 - 8 µm are distributed in a cellulose matrix at high concentrations of cellulose while the blend materials with high PHBV concentrations exhibit multiphase morphologies, including beadlike PHBV microdomains in the range of 300-400 nm. The dispersion of PHBV in cellulose leads to significant improvement in hydrophobicity due to its beadlike structure. The blend materials represent a class of degradable plastics from natural bioresources using the ionic liquid green solvent.

Electrochemical properties and applications of ionic liquids

This book presents the latest research in electrochemical properties and applications of ionic liquids. While there is no universally agreed upon definition, an ionic liquid may be conveniently described as a compound composed entirely of ions that is a liquid at temperatures less than 100 °C. However, this is an arbitrary definition employed to distinguish ionic liquids from classically well-known molten salts. This book addresses a comprehensive overview of the area, because it is obvious that ionic liquids have the ability to offer many advantages, but also some disadvantages, over traditional molecular solvent (electrolyte) media in the field of electrochemistry.