Adoption of social media in Victorian local governments

The use of the Internet and social media tools by Australians has increased significantly over the last five years. Social media tools provide local governments with the opportunity to inform, serve and interact with their constituents on a level not previously possible. This paper uses a mixed method approach to firstly review current use of social media tools by Victorian local governments and secondly interview elected officials and administrators of four Victorian local councils about barriers to the adoption of social media tools. The results show that while 59 Victorian local governments (74%) are utilizing at least one social media tool, there are 20 councils (25%) that still do not utilize social media tools. The interviews indicate that the main barriers hindering social media implementations are: uncertainty, fear of risk, lack of knowledge and experience, lack of resources, lack of trust and, the culture of government. The main contribution of this study is a review of the current level of adoption of social media tools by Victorian local governments and identifies a number of barriers that prevent local government from fully utilizing the advantages of social media tools. Currently most Victorian local governments use social media to disseminate information.

Advances in membrane distillation for water desalination and purification applications

Membrane distillation is a process that utilizes differences in vapor pressure to permeate water through a macro-porous membrane and reject other non-volatile constituents present in the influent water. This review considers the fundamental heat and mass transfer processes in membrane distillation, recent advances in membrane technology, module configurations, and the applications and economics of membrane distillation, and identifies areas that may lead to technological improvements in membrane distillation as well as the application characteristics required for commercial deployment.

The dependent variable in social media use

What is the dependent variable in social media use? From a research perspective, this is a pertinent question to help explain and understand the behaviors that underpin the widespread adoption and use of social media throughout society. From a practical
perspective, the question is relevant for social media technology providers, for businesses that use social media, and community organizations that turn towards social media to reach out to their constituents. We propose the construct 'sense of community' as the dependent variable, which is reflected in four sub-constructs related to the behaviors of social media users. These behaviors are information seeking, hedonic activities, sustaining of strong ties and extending weak ties. Empirical evidence for these constructs comes from a survey of social media use by 18-25 year-olds in Indonesia, a ,country with exceptionally high utilization of social media. We outline practical implications of the  findings and areas for further theoretical development.

Biomechanics of the sclera in myopia: Extracellular and cellular factors

Excessive axial elongation of the eye is the principal structural cause of myopia. The increase in eye size results from active remodelling of the sclera, producing a weakened scleral matrix. The present study will detail the biomechanics of the sclera and highlight the matrix and cellular factors important in the control of eye size. Scleral elasticity (load vs. tissue extension) and creep rate (tissue extension vs. time) have been measured postmortem in human eyes. Animal models of myopia have allowed the direct relevance of scleral biomechanics to be investigated during myopia development. Recently, data on tissue matrices incorporating scleral fibroblasts have highlighted the role of cellular contraction in scleral biomechanics. Scleral elasticity is increased in eyes developing myopia, with a reduction in the failure load of the tissue. Scleral creep rate is increased in the sclera from eyes developing myopia, and reduced in eyes recovering from myopia. These changes in biomechanical properties of the sclera occur early in the development of myopia (within 24 h). Alterations in scleral biomechanics during myopia development have been attributed to changes in matrix constituents, principally reduced collagen content. Although the biochemical structure of the sclera plays a critical role in defining the mechanical properties, recent studies investigating the cellular mechanics of the sclera, implicate myofibroblasts in scleral biomechanics. Scleral myofibroblasts have the capacity to contract the matrix and are regulated by tissue stress and growth factors such as transforming growth factor-ß. Changes in these regulatory factors have been observed during myopia development, implicating cellular factors in the resultant weakened sclera. Changes in the biomechanical properties of the sclera are important in facilitating the increase in axial length that results in myopia. Understanding the matrix and cellular factors contributing to the weakened sclera may aid in the development of a clinically appropriate treatment for myopia.

Are material safety data sheets (MSDS) useful in the diagnosis and management of occupational contact dermatitis?

This study assesses both the success of medical practitioners in accessing hazardous substances' information from product manufacturers and the accuracy and clinical usefulness of Material Safety Data Sheets (MSDS) presented by workers with suspected occupational contact dermatitis (OCD). 00 consecutively presented MSDS were collected from 42 workers attending an occupational dermatology clinic. Product manufacturers were contacted to verify ingredients. MSDS were evaluated for compliance with the Australian criteria for listing of OCD relevant information (sensitizers present at a concentration > or =1%, irritants present at a concentration > or =20%), and for clinical usefulness. All sensitizers were checked for clinical relevance to the worker's dermatitis. Manufacturers supplied product constituents for 77/100 MSDS. 58 MSDS satisfied the Australian standard. 57/58 MSDS were deemed clinically useful. Irritants were listed for 19/23 MSDS and sensitizers were listed for 30/68 MSDS (P = 0.001). 3 MSDS contained sensitizers, which were clinically relevant to the presenting worker's dermatitis, 1 appropriately listed, 1 present at > or =1% but not listed, and 1 present at <1% in the product and therefore, not required to be listed. Sensitizers are frequently omitted from MSDS and clinicians are often unsuccessful in obtaining crucial information from manufacturers. MSDS are inadequate for the protection and diagnosis of workers with suspected OCD.

Effect of multiple cations in the feed solution on the performance of forward osmosis

In this study, different combinations of feed stream such as 0.2, 0.3 and 0.4 M of CaCl2 were, respectively, added with 1.0, 0.9 and 0.8 M of NaCl while maintaining the draw solution concentration at either 2.0 M of NaCl or CaCl2 in order to compare likely changes to the flux generated when the feed stream contained NaCl only. The results obtained showed that more constituents in feed stream generated lesser flux. Increase in CaCl2 concentration in feed stream resulted in more severe dilutive internal concentration polarisation (DICP) and hence, reduction in the performance ratio. The temperature and distribution of aggregated particle size also played a significant role in the overall performance of forward osmosis process. Further analysis showed that there is a relationship between the normalised driving force and flux behaviour which is governed by the effect of DICP. Additionally, the reflection coefficient was not unity as less than 2% traces of salt was found to permeate alongside with water towards the draw solution side. © 2014 © 2014 Balaban Desalination Publications. All rights reserved.

Application of the embedded element technique to predict interlaminar failure

In this study a modelling technique, namely, the embedded element method is assessed to evaluate its ability to predict Mode I interlaminar failure. The embedded element technique takes advantage of the embedded constraint in ABAQUS and allows the two constituents, fibre and matrix, to be meshed independently. Since the two constituents can be meshed independently a contiguous mesh is not required and the time taken to create an acceptable mesh is significantly reduced. The embedded element technique has been used to model fibre-reinforced composite structures, however, to date no studies have been conducted which combine the embedded element technique with an interlaminar damage model. The work described herein evaluates the ability of the embedded element technique to predict mode I interlaminar failure. DCB specimens were modelled using the embedded element method and a traditional 3D solid FE modelling approach with the predictions compared against experimental data. Both modelling approaches provided good agreement with experimental results. The good agreement demonstrates that the embedded element technique is capable of providing a response that is equivalent to a traditional 3D solid FE models and is particularly suited to modelling thick composite structures with complex geometry.

Conclusion : democratising the history of democracy

The aim of The Secret History of Democracy has been to open debate on a larger view of democratic practice than that encapsulated by its wellknown standard history. The book came about from a concern that, while democracy was experiencing an ascendancy that began in the aftermath of the Second World War and intensified with the end of the Cold War, the global uptake of this particular form of governance came at the very moment when its limitations were becoming clearer: in its European and American heartlands there was less interest in participating in democracy; Clinton began in hope but ended in scandal; 9/11 was a victory for intolerance precisely because Western democracy restricted its own freedoms; the Bush, Blair and Howard governments became less relevant to their constituents and waged unpopular wars; the global financial crisis revealed democracy’s dependence on a flawed economic model; and difficulties in dealing with the global impact of climate change showed the limitations of national democracies, hostage to sectional interests. The exemplars of democracy were not having an easy time.

A phenomenological analysis of the experience of security and contentment for latency aged children in shared-time parenting arrangements

This study explored the lived experience of security and contentment, and their absence, for latency-aged children (aged 8-12) living in shared-time parenting arrangements following their parents' separation. A descriptive phenomenological methodology was utilized (Giorgi, 1985, 2009; Giorgi & Giorgi, 2003, 2008). Sixteen children living in shared-time were interviewed about their experiences of two phenomena: "feeling secure and content living in shared-time" and "not feeling secure and content living in shared-time." The eight richest protocols were selected for analysis. The two resultant general structures and their core constituents are presented, and individual variations discussed. Central to each phenomenon is the parent/s' capacity, or incapacity, to create and sustain a physical and emotional space in which the child feels secure and held in the mind, feels the arrangements are responsive to their needs, feels free to access the "absent" parent, and experiences integration between the two parental homes. Implications for phenomenological human science research are considered, including the use of descriptive phenomenology with children.

Lubricin: a versatile, biological anti-adhesive with properties comparable to polyethylene glycol

Lubricin is a glycoprotein found in articular joints which has been recognized as being an important biological boundary lubricant molecule. Besides providing lubrication, we demonstrate, using a quartz crystal microbalance, that lubricin also exhibits anti-adhesive properties and is highly effective at preventing the non-specific adsorption of representative globular proteins and constituents of blood plasma. This impressive anti-adhesive property, combined with lubricin's ability to readily self-assemble to form dense, highly stable telechelic polymer brush layers on virtually any substrates, and its innate biocompatibility, makes it an attractive candidate for anti-adhesive and anti-fouling coatings. We show that coatings of lubricin protein are as effective as, or better than, self-assembled monolayers of polyethylene glycol over a wide range of pH and that this provides a simple, versatile, highly stable, and highly effective method of controlling unwanted adhesion to surfaces.

Screening of cannabinoids in industrial-grade hemp using two-dimensional liquid chromatography coupled with acidic potassium permanganate chemiluminescence detection

Widely known for its recreational use, the cannabis plant also has the potential to act as an antibacterial agent in the medicinal field. The analysis of cannabis plants/products in both pharmacological and forensic studies often requires the separation of compounds of interest and/or accurate identification of the whole cannabinoid profile. In order to provide a complete separation and detection of cannabinoids, a new two-dimensional liquid chromatography method has been developed using acidic potassium permanganate chemiluminescence detection, which has been shown to be selective for cannabinoids. This was carried out using a Luna 100 Å CN column and a Poroshell 120 EC-C18 column in the first and second dimensions, respectively. The method has utilized a large amount of the available separation space with a spreading angle of 48.4° and a correlation of 0.66 allowing the determination of more than 120 constituents and mass spectral identification of ten cannabinoids in a single analytical run. The method has the potential to improve research involved in the characterization of sensitive, complex matrices.