Risk factors for HIV/AIDS and hepatitis C among the chronic mentally ill

The objective of this study was to document the prevalence of risk factors for HIV/AIDS and hepatitis C among people with chronic mental illness treated in a community setting.

Laboratory enhanced surveillance for meningococcal disease in Victoria

Objective: To describe the epidemiological and microbiological characteristics and notification patterns of invasive meningococcal disease (IMD) in Victoria between 1990 and 1999.

Methods: Cases of IMD occurring between 1990 and 1995 identified in any of three databases were combined, matching where possible. Statistical modelling provided estimates of cases missing from all datasets. Notification sources for 1999 and 2000 cases were identified. Cases identified from notification and laboratory results provided the data to describe IMD epidemiology between 1990 and 1999.

Results: Between 1990 and 1995, 479 cases of IMD were identified. Three individual datasets each identified between 62 and 82% of cases and 47% of cases were identified in all three datasets. Statistical modelling estimated that between 37 and 83 additional cases were not identified by any dataset. Serogroup B and C strains caused 63 and 33% of culture-positive cases, respectively, with a substantial rise in serogroup C cases in 1999. Epidemiological characteristics remained relatively constant between 1990 and 1998, but an increase in patient age was seen in cases with serogroup C disease in 1999. In addition to three clonal strains seen elsewhere, an additional strain was identified that was unique to Victoria. Since January 1999, only 72% of notifications have come from treating doctors.

Conclusions: Meningococcal disease is of increasing public health significance in Victoria. Laboratory enhanced notification has improved case identification and detailed microbiological information has improved our understanding of the changing epidemiology of this disease. Collaboration with laboratories and other agencies, active investigation of putative cases and microbiological monitoring are important elements in supporting public health decisions about the control of IMD.

The last five amino acid residues at the C-terminus of PRK1 /KKN is essential for full lipid responsiveness

PRK1/PKN is a member of the protein kinase C (PKC) superfamily of serine/threonine protein kinases. Despite its important role as a RhoA effector, limited information is available regarding how this kinase is regulated. We show here that the last seven amino acid residues at the C-terminus is dispensable for the catalytic activity of PRK1 but is critical for the in vivo stability of this kinase. Surprisingly, the intact hydrophobic motif in PRK1 is dispensable for 3-phosphoinositide-dependent kinase-1 (PDK-1) binding and phosphorylation of the activation loop, as the PRK1-Δ940 mutant lacking the last two residues of the hydrophobic motif and the last 5 residues at the C-terminus interacts with PDK-1 in vivo and has a similar specific activity as the wild-type protein. We also found that the last four amino acid residues at the C-terminus of PRK1 is critical for the full lipid responsiveness as the PRK1-Δ942 deletion mutant is no longer activated by arachidonic acid. Our data suggest that the very C-terminus in PRK1 is critically involved in the control of the catalytic activity and activation by lipids. Since this very C-terminal segment is the least conserved among members of the PKC superfamily, it would be a promising target for isozyme-specific pharmaceutical interventions.

The significance of transfusion in the past as a risk for current hepatitis B and Hepatitis C infection: a study in endoscopy patients

BACKGROUND: The objective was to determine the contribution of transfusion in the past to the risk of current infection with hepatitis B or C among patients attending a large hospital for endoscopic procedures.
STUDY DESIGN AND METHODS: Blood samples had been tested for hepatitis markers by routine methods. Patients completed a comprehensive risk factor questionnaire and results were analyzed using computer software.
RESULTS: Twenty-seven percent of the 2120 participants in the study received transfusions in the past. There was no increase in prevalence of hepatitis B among those transfused. Compared with nontransfused participants, recipients of blood before the implementation of hepatitis C virus (HCV) screening in 1990 had a 4.6-fold increased risk of HCV infection, whereas those transfused with screened blood had a 3-fold increased risk. The difference between the odds ratios for patients before and after screening was not significant.
CONCLUSIONS: Because screening has almost completely eliminated HCV from the blood supply, our finding of a continuing association of HCV infection with transfusion was unexpected. It implies that there are significant other nosocomial risks for hepatitis C transmission associated with the clinical situations where patients received blood. These should be actively investigated.

The 'filler-effect' in organic ionic plastic crystals : Enhanced conductivity by the addition of nano-sized TiO2

The addition of nano-sized ceramic particles to the plastic crystal ethyl-methyl pyrrolidinium bis(trifluoromethane sulfonyl)amide (P₁₂TFSA) has been investigated by means of DSC and conductivity. The thermal behaviour of the plastic crystal as a function of filler content suggests that the filler particles decrease the onset temperature of the melting slightly at high loadings, however they do not decrease the crystallinity of the material. Furthermore, the IV → III transition decreases in intensity, indicating that the addition of filler increases the possibility for the crystal to remain in metastable rotator phases also at lower temperatures. The conductivity shows a more than one order of magnitude increase with the addition of filler, with a filler concentration dependence that levels out above ~ 10 wt.% TiO₂.

The enhancement of lithium ion dissociation in polyelectrolyte gels on the addition of ceramic nano-fillers

Nano-particle oxide fillers including TiO₂, SiO₂ and Al₂O₃ have previously been shown to have a significant affect on the properties of both polymer and polymer gel electrolytes. In some cases, conductivity increases of one order of magnitude have been reported in crystalline PEO–base complexes. In this work, we report the effects of TiO₂ and SiO₂ on a poly(Li-AMPS)-based gel polyelectrolyte. Impedance spectroscopy and pfg-NMR spectroscopy indicates an increase in the number of available charge carriers with the addition of filler. An ideal amount of ceramic filler has been identified, with additional filler only saturating the system and reducing the conductivity below that of the pristine polyelectrolyte system. SEM micrographs suggest a model whereby the filler interacts readily with the sulfonate group; the surface area of the filler being an important factor.

Study on the role of stearic acid and ethylene-bis-stearamide on the mechanical alloying of a biomedical titanium based alloy

The present study examines the influence of different contents and types of process control agent (PCA), i.e., stearic acid (SA) and ethylene-bis-stearamide (EBS), on the microstructural evolution and characteristics of Ti-16Sn-4Nb (wt pct) alloy powders and bulk samples. The characterization of the powders and bulk samples was carried out by using chemical analysis, optical microscopy, scanning electron microscopy (SEM) combined with energy-dispersive spectrometry (EDS), and X-ray diffractometry. Results indicated that the powder recovered from the ball milling containers increased with increasing amounts of SA and EBS. Furthermore, adding more SA or EBS to the powder mixture resulted in a considerably smaller particle size, with a flaky-shaped morphology for the given ball milling time. Also, a slightly higher effectiveness was found for EBS when compared to SA. Meanwhile, the addition of both SA and EBS led to a delay in the alloy formation during mechanical alloying (MA) and caused contamination of the material with mainly carbon (C) and oxygen (O). An optimum amount of 1 wt pct PCA led to a good balance between cold welding and fracturing, and thus favored the formation of the titanium alloy. The microstructural observation of the bulk alloy showed a homogeneous distribution of fine Nb-rich ß-phase colonies within the α-Ti matrix with the addition of PCA less than 1 wt pct.

Properties of an in vitro selected Pb2+ cleavage motif

The addition of Pb 2+ to a small RNA molecule consisting of an asymmetric internal loop of six nucleotides results in site-specific cleavage followed by hydrolysis of the 2′,3′-cyclic phosphate intermediate [Pan, T., & Uhlenbeck, O. C. (1992) Nature 358, 560-563]. Here we show that the reaction is highly specific for Pb 2+ and the cleavage rate increases exponentially with pH from 5.5 to 7.0, both in the presence and in the absence of Mg 2+. This suggests that the reaction mechanism involves Pb 2+ hydroxide acting as a base. Several sequence variants of the RNA are found to be equally active in both steps of the reaction, suggesting that they fold into a similar structure.

Effects of electric fields on pollen rupture

RATIONALE: To determine whether the potential for previous termpollennext term fragmentation is increased during thunderstorms by exploring the previous termeffectsnext term of previous termelectricnext termprevious termfieldsnext term, with magnitude as found in the outdoor environment.

METHODS: Fresh previous termpollennext term grains were collected from bermudagrass flowers. A light microscope was modified with the addition of an previous termelectricnext termprevious termfieldnext term generated from a DC source (0-20 V) that was applied to the stage. Water was added to test for previous termpollennext termprevious termrupturenext term and to assess previous termpollennext term viability.

RESULTS: Bermuda grass previous termpollennext term did not previous termrupturenext term within 1 h of contact with water. Only after exposure to an previous termelectricnext termprevious termfieldnext term did Bermudagrass previous termpollennext term show a considerable amount of rupturing immediately upon immersion in water. The higher the voltage the previous termpollennext term is exposed to before coming into contact with water, the higher the percentage of previous termrupturenext term of the previous termpollennext term. previous termElectricnext termprevious termfieldsnext term, generated in the laboratory and of magnitude found during thunderstorms, affected the previous termpollennext term after as little as a 5 s exposure. The highest percentage of previous termrupturenext term occurred after exposures of at least 10 s: 80% previous termrupturenext term occurred after 10 s exposure at 10kVolts/m. This previous termeffectnext term is sustained for at least 15 min.

CONCLUSIONS: Thunderstorm regularly generate previous termelectricnext termprevious termfieldsnext term up to 5 kV/m in strength, and can reach 10kV/m, and cover several km in distance. The magnitude of the previous termelectricnext termprevious termfieldsnext term that affects the previous termpollennext term grains in the laboratory is low enough to be commonly found in the outdoor environment during thunderstorms. These previous termelectricnext termprevious termfields prime previous termpollen grains for more rapid release of allergenic particles.

c-Cbl facilitates endocytosis and lysosomal degradation of cystic fibrosis transmembrane conductance regulator in human airway epithelial cells

Cystic fibrosis transmembrane conductance regulator (CFTR) is a cAMP-activated Cl− channel expressed in the apical membrane of fluid-transporting epithelia. The apical membrane density of CFTR channels is determined, in part, by endocytosis and the postendocytic sorting of CFTR for lysosomal degradation or recycling to the plasma membrane. Although previous studies suggested that ubiquitination plays a role in the postendocytic sorting of CFTR, the specific ubiquitin ligases are unknown. c-Cbl is a multifunctional molecule with ubiquitin ligase activity and a protein adaptor function. c-Cbl co-immunoprecipitated with CFTR in primary differentiated human bronchial epithelial cells and in cultured human airway cells. Small interfering RNA-mediated silencing of c-Cbl increased CFTR expression in the plasma membrane by inhibiting CFTR endocytosis and increased CFTR-mediated Cl− currents. Silencing c-Cbl did not change the expression of the ubiquitinated fraction of plasma membrane CFTR. Moreover, the c-Cbl mutant with impaired ubiquitin ligase activity (FLAG-70Z-Cbl) did not affect the plasma membrane expression or the endocytosis of CFTR. In contrast, the c-Cbl mutant with the truncated C-terminal region (FLAG-Cbl-480), responsible for protein adaptor function, had a dominant interfering effect on the endocytosis and plasma membrane expression of CFTR. Moreover, CFTR and c-Cbl co-localized and co-immunoprecipitated in early endosomes, and silencing c-Cbl reduced the amount of ubiquitinated CFTR in early endosomes. In summary, our data demonstrate that in human airway epithelial cells, c-Cbl regulates CFTR by two mechanisms: first by acting as an adaptor protein and facilitating CFTR endocytosis by a ubiquitin-independent mechanism, and second by ubiquitinating CFTR in early endosomes and thereby facilitating the lysosomal degradation of CFTR.

Microstructure and mechanical properties of nitrided and chromized short steel fiber reinforced aluminum based P/M composites

The present investigation is on the microstructure evolution and hardness of powder metallurgically processed Al- 0.5 wt.%Mg base 10 wt.% short steel fiber reinforced composites. The 0.38 wt.% C short steel fibers of average diameter 50µm and 500-800µm length were nitrided and chromized in a fluid bed furnace. Nitriding was carried out at 525°C for 90, 30 and 5 min durations. Chromizing was performed at 950°C for 53 and 7 min durations, using thermal reactive deposition (TRD) and diffusion technique. The treated fibers and resulting reaction interfaces were characterized using metallographic, microhardness and XRD techniques.

The formation of ultrafine ferrite and low temperature bainite through thermomechanical processing

In the current study, a novel approach was employed to produce a unique combination of ultrafine ferrite grains and low temperature bainite in a low carbon steel with a high hardenability. The thermomechanical route included warm deformation of supercooled austenite followed by reheating in the ferrite region and then cooling to bainitic transformation regime (i.e. 400-250°C). The resultant microstructure was ultrafine ferrite grains (i.e. <4μm) and very fine bainite consisting of bainitic ferrite laths with high dislocation density and retained austenite films. This microstructure offers a unique combination of ultimate tensile strength and elongation due to the presence of ductile fine ferrite grains and hard low temperature bainitic ferrite laths with retained austenite films. The microstructural characteristics of bainite were studied using optical microscopy in conjunction with scanning and transmission electron microscopy techniques.

Electrophoretic deposition of YSZ thin-film electrolyte for SOFCs utilizing electrostatic-steric stabilized suspensions obtained via high energy ball milling

This manuscript describes a facile alternative route to make thin-film yttria-stabilized zirconia (YSZ) electrolyte by liquid-phase assisted electrophoretic deposition utilizing electrostatic-steric stabilized YSZ suspension followed by sintering. Very fine YSZ particles in ball-milled suspension facilitate their sustained dispersion through electrostatic mechanism as evidenced by their higher zeta potentials. Binder addition into the ball-milled suspension is also demonstrated to contribute complementary steric hindrance effects on suspension stability. As the consequence, the film quality and sinterability improve in the sequence of film made from non ball-milled suspension, film made from ball-milled suspension and film made from ball-milled suspension with binder addition. The specific deposition mechanisms pertaining to each suspension are also postulated and discussed below. A very thin dense electrolyte layer of ∼10 μm can be achieved via electrophoretic deposition route utilizing ball-milled suspension and binder addition. This in turn, makes the electrolyte resistance a more negligible part of the overall cell resistance. Further on, we also tested the performance of SOFC utilizing as-formed 10 μm YSZ electrolyte i.e. YSZ-NiO|YSZ|LSM (La0.8Sr0.2MnO3-δ), whereby a maximum power density of ∼850 mW cm−2 at 850 °C was demonstrated.

Particulate-reinforced titanium composites for orthopaedic implants

In the present study, to enhance the strength of porous pure titanium scaffolds with high porosity, new particulate-reinforced Ti-based composites with the addition of biocompatible oxide particles such as TiO₂, SiO₂, ZrO₂ and Nb₂O₅ were prepared using a powder metallurgical method. The strengths of the new particulate-reinforced titanium composites were found to be significantly higher than that of pure titanium with an excellent biocompatibility. SaOS-2 osteoblast-like cells grew and spread well on the surfaces of the new particulate-reinforced titanium composites. The present study illustrated the feasibility of using the particulate-reinforced titanium composites as an orthopaedic implant material.

The influence of water and metal ions on the transport properties of Trihexyl(tetradecyl)phosphonium chloride

A recent study indicated that the water-saturated ionic liquid (IL) trihexyl(tetradecyl)phosphonium chloride ([P_6,6,6,14][Cl]) provided a viable electrolyte for a Mg-air battery. However, there is limited literature on the properties of IL-water mixtures as battery electrolytes. The physical properties of [P_6,6,6,14][Cl] were studied with the addition of both water and metal salts (M_gCl₂ and LiCl) using conductivity and self-diffusion coefficient measurements. The conductivity of the samples at low water concentrations is surprisingly enhanced by the addition of the metal salt, contrary to lithium IL electrolytes. It was also found that the conductivity of the IL was increased by an order of magnitude by saturation with water. NMR diffusion measurements were used to probe the behaviour of both the cation and the water in the mixtures. It was found that the addition of metal salts to the water-saturated [P_6,6,6,14][Cl] did not affect the transport properties of the water or cation.