Creating community action plans for obesity prevention using the ANGELO (Analysis Grid for Elements Linked to Obesity) framework

Community-based interventions are an important component of obesity prevention efforts. The literature provides little guidance on priority-setting for obesity prevention in communities, especially for socially and culturally diverse populations. This paper reports on the process of developing prioritized, community-participatory action plans for obesity prevention projects in children and adolescents using the ANGELO (Analysis Grid for Elements Linked to Obesity) Framework. We combined stakeholder engagement processes, the ANGELO Framework (scans for environmental barriers, targeted behaviours, gaps in skills and knowledge) and workshops with key stakeholders to create action plans for six diverse obesity prevention projects in Australia (n = 3), New Zealand, Fiji and Tonga from 2002 to 2005. Some sites included sociocultural contextual analyses in the environmental scans. Target groups were under-5-year-olds (Australia), 4–12-year-olds (Australia) and 13–18-year-olds (all four countries). Over 120 potential behavioural, knowledge, skill and environmental elements were identified for prioritization leading into each 2-day workshop. Many elements were common across the diverse cultural communities; however, several unique sociocultural elements emerged in some cultural groups which informed their action plans. Youth were actively engaged in adolescent projects, allowing their needs to be incorporated into the action plans initiating the process of ownership. A common structure for the action plan promoted efficiencies in the process while allowing for community creativity and innovation. The ANGELO is a flexible and efficient way of achieving an agreed plan for obesity prevention with diverse communities. It is responsive to community needs, combines local and international knowledge and creates stakeholder ownership of the action plan.

The value of design : a discussion paper

Although there is often a difference between the architectural understanding of forms and their social and value-related perception (Malhis, 2008), elements of architectural value are often divided into economic or cultural concerns. Architecture’s true value, however, may be found at the resolution of this dichotomy although it can be argued it is not straightforward to isolate
and measure the true value of architecture. This discussion paper suggests that whilst many of the concerns highlighted appear in conflict, they are in fact reciprocal in nature with both causes being advanced through the efficiencies of architectural design. One viewpoint is that economic value perhaps should not be a topic of infrequent discussion, but rather it should be raised from time to time within the context of the broader market within which architecture is positioned. Even this viewpoint is subject to conjecture
for some. This discussion paper places the focus on the importance and relevance of value from an architectural perspective, which often is a concept rarely discussed in design circles. It is meant to encourage discourse and discussion about the different forms of value and how it is perceived in an architectural sense. As there are numerous classifications and perceptions of value in our society which are in a constant state of change, it is imperative that we regularly re-evaluate the relevance of these ever-changing values to design.

Maximising the benefits of radio frequency identification technology (RFID) integration in clinical contexts : a linear conduit

Radio Frequency Identification Technology (RFIO) has been explored for various process enhancements in clinical contexts, particularly hospitals, for asset tracking. The technology has been accepted in such environments, as it is inexpensive and, in principle, uncomplicated to integrate with other clinical support systems. It is perceived to offer many benefits to currently resource critical/strained clinical environments. This research investigation focuses on the exploitation of the potential of the technology, to enhance processes in clinical environments. In this paper, the researchers aimed to uncover if the technology, as presently deployed, has been able to achieve its potential and, in particular, if it has been fully integrated into processes in a way that maximises the benefits that were perceived. This research is part of a larger investigation that aims to develop a meta-model for integration of RFIO into processes in a form that will maximise benefits that may be achievable in clinical environments. As the first phase of the investigation, the key learning from a clinical context (hospital), which has deployed RFIO and attempted to integrate it into the processes, to enable better efficiencies, is presented in this paper. The case method has been used as a methodological framework. Two clinical contexts (hospitals) are involved in the larger project, which constitutes two phases. In Phase 1, semi structured interviews were conducted with a selected number of participants involved with the RFIO deployment project, before and after, in clinical context 1 (hereinafter named as CCl). The results were then synthesised drawing a set of key learning, from different viewpoints (implementers and users), as reported in this paper. These results outline a linear conduit for a new proposed implementation (CC2). On completion of the phase II, the researchers aim to construct a meta-model for maximising the potential of RFIO in clinical contexts. This paper is limited to the first phase that aims to draw key learning to inform the linear conduit.

Design and simulation of an interdigital-chaotic advection micromixer for lab-on-a-chip applications

The paper presents the design and simulation of a novel passive micromixer. The micromixer consists of two inlet tanks, one mixing channel and two outlet channels. In order to maximise the mixing efficiency, the following considerations are made : (i) The inlet tanks are followed by a series of microchannels, in which the flow is split. The microchannels are arranged in an interdigital manner to  maximise the contact area between the two flows. (ii) The microchannels attached to the lower inlet tank have an upward slope while those attached to the upper tank have a downward slope. The higher-density flow is fed to the lower inlet tank and gets an upward velocity before entering the mixing channel. (iii) Two triangular barriers are placed within the mixing channel to impose chaotic advection and perturb the less-mixed flow along the top and bottom surfaces of the channel. (iv) Finally, two outlet channels are incorporated to discard the less-mixed flow. Three-dimensional simulations are carried out to evaluate the performance of the micromixer. Simulations are performed in the absence and presence of the gravitational force to analyse the influence of gravity on the micromixer. Mixing efficiencies of greater than 92 % are achieved using water and a low-density biological solvent as the mixing fluids.

Business to consumer eCommerce : implications for employee management

This research explored the way service organisations deal with employee management issues when implementing eCommerce technologies. The thesis proposes a framework for understanding the technology-mediated context of the customer-employee interaction in service organisations when implementing eCommerce. The framework assists in achieving a balance between achieving efficiencies and maintaining customer loyalty.

Advice on online assessment

A good deal of investigation and development is underway in Australian universities into the possibilities for effective and efficient on-line and computer-based assessment. The current commercial ‘virtual learning environments’, which integrate various curriculum elements at subject level into a single software portal, usually offer various built-in options for student assessment. As well, many on-line assessment initiatives are being locally developed to suit specific curriculum needs.

There are many reasons why on-line assessment is being adopted by Australian universities. Many academics are seeking to diversify assessment tasks, broaden the range of skills assessed and provide students with more timely and informative feedback on their progress. Others are wishing to meet student expectations for more flexible delivery and to generate efficiencies in assessment that can ease academic staff workloads. All staff involved in such initiatives are discovering they face a large number of technical and educational decisions.

The move to on-line and computer based assessment is a natural outcome of the increasing use of information and communication technologies to enhance learning. As more students seek flexibility in their courses, it seems inevitable there will be growing expectations for flexible assessment as well.

At the same time, in a climate of increasing academic workloads, the adoption of on-line assessment may help to manage large volumes of marking and assessment-related administration efficiently. The automation of routine on-line tasks, in particular, may have the potential in the long-term to provide time/cost-efficient student assessment, though the present evidence suggests that some on-line assessment, at least in the early stages, can add significantly both to staff workload and to overall expenses.

Urban sustainability and market typologies : lessons from Tabriz Bazaar

The market is an essential component of urban form. Contemporary shopping malls can benefit from the inherent efficiencies of traditional markets. This paper addresses the development of sustainable models of market typologies based on a specific case study, the Bazaar of Tabriz in Iran.

As one of the biggest historical covered markets in the world (Moradi and Nassabi 2007), it remains an effective trading centre in the city. What are the lessons that make Tabriz a sustainable urban typology and what lessons can we draw from its spatial and operational structure?

To address this question, the paper presents two analytical studies of the urban and building morphology of Tabriz. First, the paper presents an analysis of the urban and social structure of the market based on Lynchian analysis. Second, it provides an analysis of the thermal, ventilation and lighting principles used in the buildings of the market and how they respond to the extreme climatic conditions of north-west Iran.

Rainfall and snow in one side and hot summers in the other, give the buildings in the city really critical performance in terms of life span during the years of operation.

The main target in this case study, is to illuminate the urban typological clarifications in the Bazaar of Tabriz, which wilt elucidate how parallel links between urban morphology (land cover) and urban typology (land use) in a defined urban planning can form a sustainable urban space. Moreover, how the case of this study can be an energy efficient complex with its own urban morphology.

The lessons of Tabriz for the development of contemporary markets are summarised in the paper and need to be addressed at two scales, namely the urban scale and the scale of the building.

Solar thermal aided power generation

Fossil fuel based power generation is and will still be the back bone of our world economy, albeit such form of power generation significantly contributes to global CO2 emissions. Solar energy is a clean, environmental friendly energy source for power generation, however solar photovoltaic electricity generation is not practical for large commercial scales due to its cost and high-tech nature. Solar thermal is another way to use solar energy to generate power. Many attempts to establish solar (solo) thermal power stations have been practiced all over the world. Although there are some advantages in solo solar thermal power systems, the efficiencies and costs of these systems are not so attractive. Alternately by modifying, if possible, the existing coal-fired power stations to generate green sustainable power, a much more efficient means of power generation can be reached. This paper presents the concept of solar aided power generation in conventional coal-fired power stations, i.e., integrating solar (thermal) energy into conventional fossil fuelled power generation cycles (termed as solar aided thermal power). The solar aided power generation (SAPG) concept has technically been derived to use the strong points of the two technologies (traditional regenerative Rankine cycle with relatively higher efficiency and solar heating at relatively low temperature range). The SAPG does not only contribute to increase the efficiencies of the conventional power station and reduce its emission of the greenhouse gases, but also provides a better way to use solar heat to generate the power. This paper presents the advantages of the SAPG at conceptual level.

Mixing characterisation for a serpentine microchannel equipped with embedded barriers

This paper describes the design, simulation, fabrication and experimental analysis of a passive micromixer for the mixing of biological solvents. The mixer consists of a T-junction, followed by a serpentine microchannel. the serpentine has three arcs, each equipped with circular barriers that are patterned as two opposing triangles. >The barriers are engineered to induce periodic perturbations in the flow field and enhance the mixing. CFD (Computational Fluid Dynamics) method is applied to optimise the geometric variables of the mixer before fabrication. The mixer is made from PDMS (Polydimethylsiloxane) using photo- and soft-lithography techniques. Experimental measurements are performed using yellow and blue food dyes as the mixing fluids. The mixing is measured by analysing the composition of the flow's colour across the outlet channel. The performance of the mixer is examined in a wide range of flow rates from 0.5 to 10 µl/min. Mixing efficiencies of higher than 99.4% are obtained in the experiments confirming the results of numerical simulations. The proposed mixer can be employed as a part of lab-on-a-chip for biomedical applications.

Multi-point and multi-level solar integration into a conventional coal-fired power plant

Solar-aided power generation (SAPG) is capable of integrating solar thermal energy into a conventional thermal power plant, at multi-points and multi-levels, to replace parts of steam extractions in the regenerative Rankine cycle. The integration assists the power plant to reduce coal (gas) consumption and pollution emission or to increase power output. The overall efficiencies of the SAPG plants with different solar replacements of extraction steam have been studied in this paper. The results indicate that the solar thermal to electricity conversion efficiencies of the SAPG system are higher than those of a solar-alone power plant with the same temperature level of solar input. The efficiency with solar input at 330 °C can be as high as 45% theoretically in a SAPG plant. Even the low-temperature solar heat at about 85 °C can be used in the SAPG system to heat the lower temperature feedwater, and the solar to electricity efficiency is nearly 10%. However, the low-temperature heat resource is very hard to be used for power generation in other types of solar power plants. Therefore, the SAPG plant is one of the most efficient ways for solar thermal power generation.

Dye-sensitized nanocrystalline solar cells incorporating ethylmethylimidazolium-based ionic liquid electrolytes

High-performance dye-sensitized solar cells incorporating electrochemically stable non-volatile electrolytes are especially desirable devices. In particular, ionic liquid systems based on ethylmethylimidazolium dicyanamide seem to be promising for this purpose. These have triggered our interest in the properties of further ethylmethylimidazolium-based ionic liquids with anions which are close relatives of dicyanamide. In this study, the effect of three different anions, tricyanomethanide, dicyanamide and thiocyanate, on the performance of dye-sensitized solar cells have been investigated. Both the short circuit photocurrent and conversion efficiency are increased with decreasing viscosity of the ionic liquids under comparable conditions. A conversion efficiency of 2.1% at 30% light intensity was observed for the cell containing the tricyanomethanide salt, which has lowest viscosity among the three ionic liquids, while efficiencies of 0.7% and 1.7% at the same light intensity were observed in the case of dicyanamide and thiocyanate salts, respectively, as an electrolyte.

PEDOT-coated counter electrodes for dye-sensitized solar cells

Poly(3,4-ethylenedioxythiophene) (PEDOT)-coated counter electrodes for dye-sensitized solar cells have been prepared at ambient temperature and without the use of iron-based oxidants, using an ionic liquid for the synthesis of the PEDOT. These electrodes show comparable electrocatalytic performance with conventional Pt-coated counter electrodes (solar cell efficiencies >7.5%).

Use of wild fish and other aquatic organisms as feed in aquaculture; a review of practices and implications in the Asia Pacific

Global and Asian aquaculture have witnessed a ten-fold increase in production from 1980 to 2004. However, the relative percent contribution to production of each of the major commodities has remained almost unchanged. For example, the contribution of freshwater finfish has declined from 71 to 66 percent in Asia but has remained unchanged globally over the last 20 to 30 years. This fact has dictated trends in the use of fish as a feed for cultured stocks. The growth in the sector has gone hand in hand with an increasing dependence on fish as feed, either directly or indirectly. In a number of countries in the Asia-Pacific region, the aquaculture sector has surpassed the capture fisheries sector in its respective contributions to the gross domestic product (GDP). Aquaculture’s increased contribution to national GDPs can be taken as a clear indication of the contribution of the sector to food security and poverty alleviation. The use of finfish and other aquatic organisms as a feed source can be through direct utilization of whole or chopped raw fish in wet form, through fishmeal and fish oil in formulated feeds, and/or as live fish, although the latter is uncommon and the overall amounts used are relatively small. In the first two categories, the fish used are often termed “trash fish/low-value fish”. Although attempts have been made to define this term, all definitions have a certain degree of ambiguity and/or subjectivity. In this regional review, the amount of fish used as feed sources based on the above categories was estimated primarily from the production data, supported by assumptions on the inclusion levels of fishmeal in formulated feeds and observed feed conversion efficiencies for both formulated feeds and for stock fed trash fish/low-value fish directly. A scenario for the use of fish as feed was developed by starting from the levels of aquaculture production recorded in 2004 and assuming increases in production volumes of 10, 15 and 20 percent by 2010, respectively, for the three trajectories. In parallel, the pattern of wild fish use as feed was projected to change as fish and shrimp farmers increasingly replace farmmade feeds by incorporating trash fish/low-value fish with manufactured feeds that include fishmeal. Also, the fishmeal inclusion rates in manufactured feeds are falling slowly, and this has been incorporated into the projections. The regional review also deals with the production of fishmeal using trash fish/low-value fish in the Asia-Pacific region. Regional fishmeal production as a whole is relatively low when compared with that of major fishmeal-producing countries such as Chile, Iceland and Norway, amounting to approximately 1 million tonnes per year. However, there is a trend towards increasing the use of fish industry waste, such as from the tuna canning industry in Thailand. The fishmeal produced in the region is priced considerably lower than globally traded fishmeal, but its quality is poorer. Total fishmeal use in Asian aquaculture in 2004 was estimated as 2 388 million tonnes, the highest proportion of this being used for crustacean aquaculture (1 418 million tonnes). Based on growth predictions (to year 2010) in the sector and improvements to feed quality and management, it is expected that the quantity of fishmeal used in Asian aquaculture will be slightly less than at present. An estimated 240 000 tonnes of fish oil is used in Asian aquaculture, principally in shrimp feeds. Based on production estimates of commodities in 2004 that rely on trash fish/low-value fish as the main feed source, this regional review suggests that Asian aquaculture currently uses between 2 465 and 3 882 million tonnes, an amount that is predicted to decrease to between 1.890 and 2 795 million tonnes by 2010. The use of trash fish/low-value fish and fishmeal by the aquaculture sector has been repeatedly adjudicated as a non-sustainable practice, and globally the sector is seeking to reduce its dependence on fish as feed through improved feed management practices and development of better quality feeds and feed formulations using alternative ingredients. Over the next few years, decreases in the use of trash fish/low-value fish are also expected to be achieved through better conversion of raw materials into fishmeal and fish oil during the reduction processes. The “way forward” in addressing the issue of the use of fish as feed in aquaculture in the Asia-Pacific region includes the need for a concerted regional research thrust to reduce the use of fish as feed sources in aquaculture, as has been achieved in the animal husbandry sector. Secondly, there is a need to increase farmer awareness on the use of trash fish as feed. This is achievable, considering the similar progress that has been made by the region’s shrimp farming sector, which almost exclusively involves small-scale practitioners who are often clustered in a given locality. The analysis also suggests that the use of trash fish/low-value fish in aquaculture may be compatible with improving food security and alleviating poverty. In Asia, trash fish/low-value fish is mostly landed in areas where there are other suitable fish commodities for human consumption. To make the trash fish/low-value fish suitable and available for human consumption would involve some degree of value-adding and transportation costs, which are likely to increase the price to beyond the means of the consumer, particularly in remote rural areas. Under such a scenario, the direct or indirect use of this perishable resource as a feed source to produce a consumable commodity appears to make economic sense and appears to be the most logical use for overall human benefit. In this manner, trash fish/low-value fish contributes to food security by increasing income generation opportunities and hence contributes to poverty alleviation. Another factor that needs to be taken into account is the large numbers of artisanal fishers who harvest this raw material. The continued use of trash fish/low-value fish, therefore, allows these fishers to maintain their livelihoods¹. Admittedly, this is an area that warrants more detailed investigation, from resource use, livelihoods and economic viewpoints.

Ionic liquid electrolyte porphyrin dye sensitised solar cells

Ionic liquid electrolytes based on a number of imidazolium, quaternary ammonium and phosphonium cations have been developed for porphyrin dye sensitised solar cells yielding efficiencies of up to 5.2% at 0.68 Sun.

Alternative water strategies in public domains : innovative strategies in progress along North Terrace, Adelaide

Water sensitive design on our urban threshold is increasingly becoming topical. In Adelaide it is being driven by stormwater management strategies and economic efficiencies in a city that is beginning to embrace its Mediterranean environment, low water sustainability, and whether our showpiece public domains in Adelaide can afford large expanses of manicured lawns.

This paper reviews four projects in progress along the North Terrace in Adelaide. The first involves a major redesign of First Creek as it traverses Adelaide Botanic Garden to address stormwater management issues. The redesign includes strategies to control flash flooding, to cleanse stream water from pollutants, and to carefully incorporate a wetland system as an integral botanical and horticultural feature of a botanic garden. Further down North Terrace, the University of Adelaide is evaluating a scenario that will totally redesign Goodman Crescent, its picture-postcard promenade lawn. The scenario is to host an integrated water retention and water purification and cleansing system that will service independently of mains water an irrigation system and a waterfall. The proposal draws upon a similar strategy recently adopted by the South Australian Museum to capture and cleanse surface and roof water but place the installation and process on display as part of its overall biodiversity museum display that will unfold over the next five years under director Tim Flannery. The fourth example, in process at present, is to devise an integrated water system that may enable the Government House grounds to remove itself from dependence upon costly mains water to totally sustain its extensive gardens and lawns.

Importantly each project has similar threads: creative water maximization and purification use, and a desire to place these ‘installations’ on display as public statements of their commitment to water sustainability in Adelaide. But radically, here are four prominent cultural institutions readily willing to redefine the notion and traditional visual imagery of a ‘wetland’ on what is the main cultural boulevard of a capital city.