100 resultados para autonomous objects


Relevância:

20.00% 20.00%

Publicador:

Resumo:

This paper describes the procedure for detection and tracking of a vehicle from an on-road image sequence taken by a monocular video capturing device in real time. The main objective of such a visual tracking system is to closely follow objects in each frame of a video stream, such that the object position as well as other geometric information are always known. In the tracking system described, the video capturing device is also moving. It is a challenge to detect and track a moving vehicle under a constantly changing environment coupled to real time video processing. The system suggested is robust to implement under different illuminating conditions by using the monocular video capturing device. The vehicle tracking algorithm is one of the most important modules in an autonomous vehicle system, not only it should be very accurate but also must have the safety of other vehicles, pedestrians, and the moving vehicle itself. In order to achieve this an algorithm of multi resolution technique based on Haar basis functions were used for the wavelet transform, where a combination of classification was carried out with the multilayer feed forward neural network. The classification is done in a reduced dimensional space, where principle component analysis (PCA) dimensional reduction technique has been applied to make the classification process much more efficient. The results show the effectiveness of the proposed methodology.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this paper, an algorithm for approximating the path of a moving autonomous mobile sensor with an unknown position location using Received Signal Strength (RSS) measurements is proposed. Using a Least Squares (LS) estimation method as an input, a Maximum-Likelihood (ML) approach is used to determine the location of the unknown mobile sensor. For the mobile sensor case, as the sensor changes position the characteristics of the RSS measurements also change; therefore the proposed method adapts the RSS measurement model by dynamically changing the pass loss value alpha to aid in position estimation. Secondly, a Recursive Least-Squares (RLS) algorithm is used to estimate the path of a moving mobile sensor using the Maximum-Likelihood position estimation as an input. The performance of the proposed algorithm is evaluated via simulation and it is shown that this method can accurately determine the position of the mobile sensor, and can efficiently track the position of the mobile sensor during motion.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This note points out that the time complexity of the main multiple-surface sliding control (MSSC) algorithm in Huang and Chen [Huang, A. C. & Chen, Y. C. (2004). Adaptive multiple-surface sliding control for non-autonomous systems with mismatched uncertainties. Automatica, 40(11), 1939-1945] is O(2^n). Here, we propose a simplified recursive design MSSC algorithm with time complexity O(n), and, using mathematical induction, we show that this algorithm agrees with this MSSC law.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The development and use of cocycles for analysis of non-autonomous behaviour is a technique that has been known for several years. Initially developed as an extension to semi-group theory for studying rion-autonornous behaviour, it was extensively used in analysing random dynamical systems [2, 9, 10, 12]. Many of the results regarding asymptotic behaviour developed for random dynamical systems, including the concept of cocycle attractors were successfully transferred and reinterpreted for deterministic non-autonomous systems primarily by P. Kloeden and B. Schmalfuss [20, 21, 28, 29]. The theory concerning cocycle attractors was later developed in various contexts specific to particular classes of dynamical systems [6, 7, 13], although a comprehensive understanding of cocycle attractors (redefined as pullback attractors within this thesis) and their role in the stability of non-autonomous dynamical systems was still at this stage incomplete. It was this purpose that motivated Chapters 1-3 to define and formalise the concept of stability within non-autonomous dynamical systems. The approach taken incorporates the elements of classical asymptotic theory, and refines the notion of pullback attraction with further development towards a study of pull-back stability arid pullback asymptotic stability. In a comprehensive manner, it clearly establishes both pullback and forward (classical) stability theory as fundamentally unique and essential components of non-autonomous stability. Many of the introductory theorems and examples highlight the key properties arid differences between pullback and forward stability. The theory also cohesively retains all the properties of classical asymptotic stability theory in an autonomous environment. These chapters are intended as a fundamental framework from which further research in the various fields of non-autonomous dynamical systems may be extended. A preliminary version of a Lyapunov-like theory that characterises pullback attraction is created as a tool for examining non-autonomous behaviour in Chapter 5. The nature of its usefulness however is at this stage restricted to the converse theorem of asymptotic stability. Chapter 7 introduces the theory of Loci Dynamics. A transformation is made to an alternative dynamical system where forward asymptotic (classical asymptotic) behaviour characterises pullback attraction to a particular point in the original dynamical system. This has the advantage in that certain conventional techniques for a forward analysis may be applied. The remainder of the thesis, Chapters 4, 6 and Section 7.3, investigates the effects of perturbations and discretisations on non-autonomous dynamical systems known to possess structures that exhibit some form of stability or attraction. Chapter 4 investigates autonomous systems with semi-group attractors, that have been non-autonomously perturbed, whilst Chapter 6 observes the effects of discretisation on non-autonomous dynamical systems that exhibit properties of forward asymptotic stability. Chapter 7 explores the same problem of discretisation, but for pullback asymptotically stable systems. The theory of Loci Dynamics is used to analyse the nature of the discretisation, but establishment of results directly analogous to those discovered in Chapter 6 is shown to be unachievable. Instead a case by case analysis is provided for specific classes of dynamical systems, for which the results generate a numerical approximation of the pullback attraction in the original continuous dynamical system. The nature of the results regarding discretisation provide a non-autonomous extension to the work initiated by A. Stuart and J. Humphries [34, 35] for the numerical approximation of semi-group attractors within autonomous systems. . Of particular importance is the effect on the system's asymptotic behaviour over non-finite intervals of discretisation.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Thesis consists of a novel and an exegetical reflections with references. There is no abstract provided by the author.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

We present a case study of scanning 3D objects for the purposes of education and public information. We begin by describing the original design of a 3D scanning system now in use in Cairo’s Egyptian Museum. The system captures both the geometry and surface color and detail of museum artifacts. We report on the experience using the system in the museum setting, and how practical problems with the system were addressed. We present samples of how the processed 3D data will be used on a web site designed to communicate Egyptian culture.We present a case study of scanning 3D objects for the purposes of education and public information. We begin by describing the original design of a 3D scanning system now in use in Cairo’s Egyptian Museum. The system captures both the geometry and surface color and detail of museum artifacts. We report on the experience using the system in the museum setting, and how practical problems with the system were addressed. We present samples of how the processed 3D data will be used on a web site designed to communicate Egyptian culture.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This concept-empirical inquiry investigated tensions between practitioners and their clients' significant-others. At its root, this difficulty was found to reflect embedded ideological, professional and organizational factors aligned with the process of individualization, a disposition which renders significant-other relationships as, at best, irrelevant to the professionals' understanding of their project.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This research presents a novel haptic grasping interface and demonstrates its ability within multi-point event-based feedback. Through experimental methodology, the dynamics involved in grasp contact interactions are modelled based on first principles. The proposed approach demonstrates a method of realistically representing grasp contact with rigid virtual objects through multi-point interaction.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This research investigated the cooperation of multi underwater robots to perform a task. This combined engineering design, electronics and consensus control to create systems capable of achieving the task. Challenges such as underwater radio communications were researched and a simulation framework was created and tested on virtual and real systems.