Cooperative relaying in wireless sensor networks

Cooperative relaying has been shown to be an effective method to significantly improve the error-rate performance in wireless networks. This technique combats fading by exploiting the spatial diversity made available through cooperating nodes that relay signals for each other. In the context of wireless sensor networks, cooperative relaying can be applied to reduce the energy consumption in sensor nodes and thus extend the network lifetime. Realizing this benefit, however, requires a careful incorporation of this technique into the routing process to exploit diversity gains. In this chapter, we introduce the basic concepts required to understand cooperative relaying and review current state of the art energy-efficient routing protocols that realize cooperative relaying.

Energy-efficient medium access control in wireless sensor networks

Medium access control for wireless sensor networks has been an active
research area in the past decade. This chapter discusses a set of important medium access control (MAC) attributes and possible design trade-offs in protocol design, with an emphasis on energy efficiency. Then we categorize existing MAC protocols into five groups, outline the representative protocols, and compare their advantages and disadvantages in the context of wireless sensor network. Finally, thoughts for practitioners are presented and open research issues are also discussed.

Fast recovery from node compromise in wireless sensor networks

Wireless Sensor Networks (WSNs) are susceptible to a wide range of security attacks in hostile environments due to the limited processing and energy capabilities of sensor nodes. Consequently, the use of WSNs in mission critical applications requires reliable detection and fast recovery from these attacks. While much research has been devoted to detecting security attacks, very little attention has been paid yet to the recovery task. In this paper, we present a novel mechanism that is based on dynamic network reclustering and node reprogramming for recovering from node compromise. In response to node compromise, the proposed recovery approach reclusters the network excluding compromised nodes; thus allowing normal network operation while initiating node recovery procedures. We propose a novel reclustering algorithm that uses 2-hop neighbourhood information for this purpose. For node reprogramming we propose the modified Deluge protocol. The proposed node recovery mechanism is both decentralized and scalable. Moreover, we demonstrate through its implementation on a TelosB-based sensor network testbed that the proposed recovery method performs well in a low-resource WSN.

Lightweight authentication for recovery in wireless sensor networks

Wireless sensor networks (WSNs) suffer from a wide range of security attacks due to their limited processing and energy capabilities. Their use in numerous mission critical applications, however, requires that fast recovery from such attacks be achieved. Much research has been completed on detection of security attacks, while very little attention has been paid to recovery from an attack. In this paper, we propose a novel, lightweight authentication protocol that can secure network and node recovery operations such as re-clustering and reprogramming. Our protocol is based on hash functions and we compare the performance of two well-known lightweight hash functions, SHA-1 and Rabin. We demonstrate that our authentication protocol can be implemented efficiently on a sensor network test-bed with TelosB motes. Further, our experimental results show that our protocol is efficient both in terms of computational overhead and execution times which makes it suitable for low resourced sensor devices.

Intelligent based mobility models for data management in wireless sensor networks

Wireless sensor networks (WSNs) are proposed as powerful means for fine grained monitoring in different classes of applications at very low cost and for extended periods of time. Among various solutions, supporting WSNs with intelligent mobile platforms for handling the data management, proved its benefits towards extending the network lifetime and enhancing its performance. The mobility model applied highly affects the data latency in the network as well as the sensors’ energy consumption levels. Intelligent-based models taking into consideration the network runtime conditions are adopted to overcome such problems. In this chapter, existing proposals that use intelligent mobility for managing the data in WSNs are surveyed. Different classifications are presented through the chapter to give a complete view on the solutions lying in this domain. Furthermore, these models are compared considering various metrics and design goals.

Applying fair intelligent congestion control in a hybrid QoS architecture for wireless environment

This simple and scalable Differentiated Services (DiffServ) QoS control model is acceptable for the core of the network. However, more explicit and stringent admission and reservation based QoS mechanisms are required in the wireless access segment of the network, where available resources are severely limited and the degree of traffic aggregation is not significant, thus rendering the DiffServ principles less effective. In this paper we present a suitable hybrid QoS architecture framework to address the problem. At the wireless access end, the local QoS mechanism is designed in the context of IEEE 802.11 WLAN with 802.11e QoS extensions. At the edge and over the DiffServ domain, the Fair Intelligent Congestion Control (FICC) algorithm is applied to provide fairness among traffic aggregates and control congestion at the bottleneck interface between the wireless link and the network core.

GeoConnect : geographic and connectivity-aware routing protocol for wireless sensor network

Sensor nodes are closely tied with their geographic location and their connectivity. In recent years many routing protocols have been developed to provide efficient strategy. But most of them are either focus on the geographic proximity or on connectivity. However in sparse network, Geographic routing would fail at local dead ends where a node has no neighbour closer to destination. In contrast, connectivity-based routing may result in non-optimal path and overhead management. In this paper we designed a scalable and distributed routing protocol, GeoConnect, which considers geographic proximity and connectivity for choosing next hop. In GeoConnecl, we construct a new naming system that integrates geographic and connectivity information into a node identification. We use dissimilarity function to compute the dissimilarity and apply a distributed routing algorithm to route packets. The experimental results show that GeoConnect routing provides robust and better performance than sole geographic routing or connectivity routing.

Multi-level virtual ring : a foundation network architecture to support peer-to-peer application in wireless sensor network

Two main problems prevent the deployment of peer-to-peer application in a wireless sensor network: the index table, which should be distributed stored rather than uses a central server as the director; the unique node identifier, which cannot use the global addresses. This paper presents a multi-level virtual ring (MVR) structure to solve these two problems.

The index table in MVR is distributed stored by using the DHT technique. MVR is constructed decentralized and runs on mobile nodes themselves, requiring no central server or interruption. Naming system in MVR uses natural names rather than global addresses to identify sensor nodes. The MVR can route directly on the name identifiers of the sensor nodes without being aware the location. Some sensor nodes are selected as the backbone nodes by the backbone selection algorithm and are placed on the different levels of the virtual rings. MVR hashes nodes’ identifiers on the virtual ring, and stores them at the backbone nodes. Furthermore, MVR adopts cross-level routing to improve the routing efficiency.

Experiments using ns2 simulator for up to 200 nodes show that the storage and bandwidth requirements of MVR grow slowly with the size of the network. Furthermore, MVR has demonstrated as self-administrating, fault-tolerant, and resilient under the different workloads.

Virtual backbone content routing in wireless ad-hoc network

We developed a new content routing based on the virtual backbone structure, which groups wireless nodes and contents into a virtual architecture. Our approach is scalable, works with local information, and does not rely on address information. The naming system uses flat naming to identify nodes and contents, and organizes these identifiers together. Backbone nodes can be selected automatically or predefined to direct their associated normal nodes in a local area. The normal nodes are guided by the backbone nodes to full fill the searching and routing processes. With a virtual structure, the searching performance can be improved by using the DHT technique.

Experiments using ns2 simulator demonstrate that this virtual backbone routing architecture has the following significances: workable without being aware address in a mobile situation; scalable with the size of network; efficient in terms of the reduced hop counts and short end-to-end delay, and also resistant to the dead-end problem.

Design and simulation of a tunable MEMS filter for wireless biomedical signal transceivers

This paper presents a new architecture for a high quality tunable MEMS filter that can be used in wireless biomedical signal transceivers. It consists of a π match circuit with two shunt capacitive coupling switches separated by a piece of high impedance short transmission line, and also a series switch placed at the quarter wavelength distance away from the π match circuit. The low actuation voltage and also tunability are important features of the design objective. All portions of the filter can be realized simultaneously. Thus, the filter docs not require any extra steps during its fabrication, and is not costly. The simulation results confirm the good performance of the filter.

Piggyback hunting-browsing the internet in Australia via unsecured wireless networks : virtual theft or acceptable behaviour in an online world?

In a world that is increasingly dominated by the Internet, there is a growing demand for low cost access at the users convenience. The expansion of wireless Internet networks, in particular unsecured wireless Internet networks, gives rise to novel challenges for the regulation of Internet access. The ability to access unsecured wireless Internet networks with ease and with very little impact upon the owner of the network suggests that such 'piggybacking' may be criminal behaviour or may amount to an actionable civil wrong. This paper will explore the legal ramifications of piggybacking an unsecured wireless network with knowledge that there is no entitlement to the use of the network and will consider what Australian authorities should do about this situation. This paper will look at the position in Australia and juxtapose this with that of the United Kingdom and the United States of America. In both the United Kingdom and the United States of America prosecutions have taken place of individuals who knowingly accessed unsecured wireless
networks for their own personal use.

Wireless sensor networks for in-situ image validation for water and nutrient management

Water and Nitrogen (N) are critical inputs for crop production. Remote sensing data collected from multiple scales, including ground-based, aerial, and satellite, can be used for the formulation of an efficient and cost effective algorithm for the detection of N and water stress. Formulation and validation of such techniques require continuous acquisition of ground based spectral data over the canopy enabling field measurements to coincide exactly with aerial and satellite observations. In this context, a wireless sensor in situ network was developed and this paper describes the results of the first phase of the experiment along with the details of sensor development and instrumentation set up. The sensor network was established based on different spatial sampling strategies and each sensor collected spectral data in seven narrow wavebands (470, 550, 670, 700, 720, 750, 790 nm) critical for monitoring crop growth. Spectral measurements recorded at required intervals (up to 30 seconds) were relayed through a multi-hop wireless network to a base computer at the field site. These data were then accessed by the remote sensing centre computing system through broad band internet. Comparison of the data from the WSN and an industry standard ground based hyperspectral radiometer indicated that there were no significant differences in the spectral measurements for all the wavebands except for 790nm. Combining sensor and wireless technologies provides a robust means of aerial and satellite data calibration and an enhanced understanding of issues of variations in the scale for the effective water and nutrient management in wheat.

Dynamic addressing in wireless sensor networks without location awareness

Sensor Networks have applications in diverse fields. They can be deployed for habitat modeling, temperature monitoring and industrial sensing. They also find applications in battlefield awareness and emergency (first) response situations. While unique addressing is not a requirement of many data collecting applications of wireless sensor networks, it is vital for the success of applications such as emergency response. Data that cannot be associated with a specific node becomes useless in such situations. In this work we propose a novel dynamic addressing mechanism for wireless sensor networks that are not location-aware. The scheme enables successful reuse of addresses in event-driven wireless sensor networks introducing minimal latencies and efficiently addressing packet loss. It also eliminates the need for network-wide Duplicate Address Detection (DAD) to ensure uniqueness of network level addresses.