Development of microfluidic-based analytical methodology for studying the effects of chemotherapy agents on cancer tissue

Whilst a multitude of techniques have been employed to study the biology of tumour tissue and its response to chemotherapeutic reagents, most current methodologies do not capture the sophistication of the in vivo environment. Microfluidics however offers the ability to maintain and interrogate primary tissue samples in an environment with biomimetic flow characteristics. In this study head and neck squamous cell carcinoma (HNSCC) tumour biopsies have been used to investigate the performance of a microfluidic device for generating clinically-useful information. The response of fresh and cryogenically-frozen primary HNSCC or metastatic lymph node samples to chemotherapy drugs (cisplatin, 5-flurouracil or docetaxel), alone and in combination, were monitored for both proliferation (water-soluble tetrazolium salt metabolism) and cell death biomarker release (lactate dehydrogenase, LDH) “off-chip”. The frozen tissue showed no significant difference in terms of either proliferation or LDH release in comparison with the matched fresh samples. Administration of all drugs caused cell death, in a dose-response manner, with the combination showing the greatest amount of cytotoxicity particularly at days 8 and 9; correlating well with published clinical data. The system described here offers an innovative method for studying the tumour microenvironment in vitro and, through incorporation of relevant analytical modules, provides the basis of a pre-clinical device that can be used to define personalised treatment regimens.

Improving the photostability of bleached wool without increasing its yellowness

Bleached wool is rapidly yellowed by exposure to the UV radiation present in sunlight. The conventional application of a water-soluble hydroxyphenyl benzotriazole UV absorber (such as UVFast W) to bleached wool reduces its rate of photoyellowing but has a negative impact on the whiteness of the bleached wool, largely cancelling out the improvements in whiteness achieved during bleaching. However, if the UV absorber is applied to peroxide-bleached wool from a reductive bleach bath, white wool with improved photostability to sunlight and UV radiation can be obtained.

Phase inversion of ionomer-stabilized emulsions to form high internal phase emulsions (HIPEs)

Herein, we report the phase inversion of ionomer-stabilized emulsions to form high internal phase emulsions (HIPEs) induced by salt concentration and pH changes. The ionomers are sulfonated polystyrenes (SPSs) with different sulfonation degrees. The emulsion types were determined by conductivity measurements, confocal microscopy and optical microscopy, and the formation of HIPE organogels was verified by the tube-inversion method and rheological measurements. SPSs with high sulfonation degrees (water-soluble) and low sulfonation degrees (water-insoluble) can stabilize oil-in-water emulsions; these emulsions were transformed into water-in-oil HIPEs by varying salt concentrations and/or changing the pH. SPS, with a sulfonation degree of 11.6%, is the most efficient, and as low as 0.2 (w/v)% of the organic phase is enough to stabilize the HIPEs. Phase inversion of the oil-in-water emulsions occurred to form water-in-oil HIPEs by increasing the salt concentration in the aqueous phase. Two phase inversion points from oil-in-water emulsions to water-in-oil HIPEs were observed at pH 1 and 13. Moreover, synergetic effects between the salt concentration and pH changes occurred upon the inversion of the emulsion type. The organic phase can be a variety of organic solvents, including toluene, xylene, chloroform, dichloroethane, dichloromethane and anisole, as well as monomers such as styrene, butyl acrylate, methyl methacrylate and ethylene glycol dimethacrylate. Poly(HIPEs) were successfully prepared by the polymerization of monomers as the continuous phase in the ionomer-stabilized HIPEs.

Mobile phone-based electrochemiluminescence sensing exploiting the 'USB On-The-Go' protocol

A low-cost system to generate, control and detect electrochemiluminescence using a mobile smartphone is described. A simple tone-detection integrated circuit is used to switch power sourced from the phone's Universal Serial Bus (USB) 'On-The-Go' (OTG) port, using audible tone pulses played over the device's audio jack. We have successfully applied this approach to smartphones from different manufacturers and with different operating system versions. ECL calibrations of a common luminophore, tris(2,2′-bipyridine)ruthenium(II) ([Ru(bpy)3]²⁺), with 2-(dibutylamino)ethanol (DBAE) as a co-reactant, showed no significant difference in light intensities when an electrochemical cell was controlled by a mobile phone in this manner, compared to the same calibration generated using a conventional potentiostat. Combining this novel approach to control the applied potential with the measurement of the emitted light through the smart phone camera (using an in-house built Android app), we explored the ECL properties of a water-soluble iridium(III) complex that emits in the blue region of the spectrum. The iridium(III) complex exhibited superior co-reactant ECL intensities and limits of detection to that of the conventional [Ru(bpy)3]²⁺ luminophore.

Design of fucoidan functionalized - iron oxide nanoparticles for biomedical applications

This research aims to develop an iron oxide nanoparticle drug delivery system utilizing a recent material discovered from ocean, fucoidan. The material has drawn much interest due to many biomedical functions that have been proven for human health. One interesting point herein is that fucoidan is not only a sulfated polysaccharide, a polymer for stabilization of iron oxide nanoparticles, but plays a role of an anticancer agent also. Various approaches were investigated to optimize the high loading efficiency and explain the mechanism of nanoparticle formations. Fucoidan was functionalized on iron oxide nanoparticles by a direct coating or via amine groups. Also, a hydrophobic part of oleic acid was conjugated to the amine groups for a more favorable loading of poorly water-soluble anticancer drugs. This study proposed a novel system and an efficient method to functionalize fucoidan on iron oxide nanoparticle systems which will lead to a facilitation of a double strength treatment of cancer.

Development of a sustained release solid dispersion using swellable polymer by melting method

PURPOSE: This study is to design a sustained release solid dispersion using swellable polymer by melting method. METHODS: Polyethylene glycol 6000 (PEG 6000) and hydroxypropyl methylcellulose 4000 (HPMC 4000) were used in solid dispersion for not only enhancing drug dissolution rate but also sustaining drug release. HPMC 4000 is a common swellable polymer in matrix sustained release dosage form, but could not be used in preparation of solid dispersion by melting method. However, the current study utilized the swelling capability of HPMC 4000 accompanied by the common carrier PEG 6000 in solid dispersion to accomplish the goal. RESULTS: While PEG 6000 acted as a releasing stimulant carrier and provided an environment to facilitate the swelling of HPMC 4000, this swellable polymer could act as a rate-controlling agent. This greatly assisted the dissolution enhancement by changing the crystalline structure of drug to more amorphous form and creating a molecular interaction. CONCLUSIONS: These results suggested that this useful technique can be applied in designing a sustained release solid dispersion with many advantages.

Investigation of Fucoidan–oleic acid conjugate for delivery of Curcumin and Paclitaxel

Nanoparticles for a specific delivery are likely to be designed for cancer therapeutic effectiveness and improvement. In this study, a fucoidan-oleic acid conjugate was prepared and investigated in terms of loading capacity for poorly water-soluble anti-cancer drugs to maximize effectiveness of the treatment. Fucoidan was used as a hydrophilic portion of an amphiphilic structure for improving cancer therapeutic effects. Paclitaxel and curcumin were chosen as other model drugs loaded in the conjugates. The results showed that self-assembled nanoparticles with different sizes and morphologies could be prepared with two different concentrations of oleic acid as hydrophobic portion. Moreover, loading efficiency and release patterns of these drugs were mainly dependent on the hydrophobic interaction between drugs and oleic acid. It was also revealed that fucoidan and curcumin were released higher at pH 4.5 than at the physiological condition (pH 7.4), thus, facilitating the delivery and maximizing effects of the anticancer agents on cancer cells. On the contrary, paclitaxel from fucoidan nanoparticles was released faster at pH 7.4. The exploration of fucoidan–oleic acid conjugate could be considered as promising nanomedicines for cancer therapeutics.

Effects of hydrocolloids on partial baking and frozen storage of wheat flour chapatti

The use of hydrocolloids in different foods systems has become more commonly applied to improve the texture and quality of baked products. Nevertheless, the effects of these compounds on partially baked frozen chapatti have not been studied. The objective of the present study was to improve the storage stability, quality and shelf life of partially baked chapatti by adding various hydrocolloids, hydroxyl propyl methylcellulose (HPMC), carboxy methylcellulose (CMC) and guar gum, followed by frozen storage for 28 days. Partially baked and fully baked chapattis after frozen storage were analyzed for chemical and sensory attributes at 7-day intervals. Rheological studies showed an increase in water absorption, dough development time and dough stability after the addition of hydrocolloids. In partially baked chapatti with hydrocolloids after frozen storage, an increase in moisture retention and water soluble starch was observed. Sensory characteristics were also improved by combining both techniques. Among the hydrocolloids, HPMC exhibited the best results, followed by CMC and guar gum. These hydrocolloids and partial baking with frozen storage helped to improve the quality, and extend the shelf life of partially baked chapatti.

Effect of a commercial alcohol ethoxylate surfactant (C11–15E7) on biodegradation of phenanthrene in a saline water medium by Neptunomonas naphthovorans

Biodegradation of poorly soluble polycyclic aromatic hydrocarbons (PAHs) has been a challenge in bioremediation. In recent years, surfactant-enhanced bioremediation of PAH contaminants has attracted great attention in research. In this study, biodegradation of phenanthrene as a model PAHs solubilized in saline micellar solutions of a biodegradable commercial alcohol ethoxylate nonionic surfactant was investigated. The critical micelle concentration (CMC) of the surfactant and its solubilization capacity for phenanthrene were examined in an artificial saline water medium, and a type of marine bacteria, Neptunomonas naphthovorans, was studied for the biodegradation of phenanthrene solubilized in the surfactant micellar solutions of the saline medium. It is found that the solubility of phenanthrene in the surfactant micellar solutions increased linearly with the surfactant concentrations, but, at a fixed phenanthrene concentration, the biodegradability of phenanthrene in the micellar solutions decreased with the increase of the surfactant concentrations. This was attributed to the reduced bioavailability of phenanthrene, due to its increased solubilization extent in the micellar phase and possibly lowered mass transfer rate from the micellar phase into the aqueous phase or into the bacterial cells. In addition, an inhibitory effect of the surfactant on the bacterial growth at high surfactant concentrations may also play a role. It is concluded that the surfactant largely enhanced the solubilization of phenanthrene in the saline water medium, but excess existence of the surfactant in the medium should be minimized or avoided for the biodegradation of phenanthrene by Neptunomonas naphthovorans.

Fouling in reverse osmosis (RO) membrane in water recovery from secondary effluent : a review

Reverse osmosis (RO) is the most preferable process for water recovery from secondary effluent (SE) because of its higher rejection of impurities with lower associated cost and higher quality of product. Fouling still is a major challenge during the water recovery due to higher contaminant loadings in SE and high rejection capability of this membrane. The presence of suspended solids, colloidal and organic matters, and high level of biological activities in SE further elevate fouling potentiality. This review was performed to identify major foulants causing hindrance in sustainable application of reverse osmosis and to present available pre-treatment options for these foulants. There are four fouling types present in RO namely; bio-fouling, inorganic/scaling, organic, and particulate fouling. Among them; bio-fouling is less understood but dominant since the pre-treatment options are not well developed. Other fouling mechanisms have been overcome by well developed pre-treatments. The major foulants for RO are dissolved and macromolecular organic substances, sparingly soluble inorganic compounds, colloidal and suspended particles, and micro-organisms. Some of these potential fouling water quality parameters (PFWQPs) are interrelated with each others such as electrical conductivity is a surrogate measure of total dissolved solids with established stable relationship. Most of these PFWQPs such as total suspended solids, turbidity, chemical oxygen demand can be removed by conventional pre-treatment; some such as colloidal particles and micro-organisms by modern options and even others such as endocrine disrupting compounds, pharmaceutical and personal care products are still challenging for current pre-treatments. These foulants need to be identified properly to integrate appropriate pre-treatments for minimizing fouling potentiality to increase water recovery at minimal costs.