vPELS : An e-learning social environment for VLSI design with content security using DRM

This article provides a proposal for personal e-learning system (vPELS [where 'v' stands for VLSI: very large scale integrated circuit])) architecture in the context of social network environment for VLSI Design. The main objective of vPELS is to develop individual skills on a specific subject - say, VLSI - and share resources with peers. The authors' system architecture defines the organisation and management of the personal learning environment in such a way as to aid in creating, verifying and sharing learning artefacts and making money at the same time. The authors also focus in their research on one of the most interesting arenas in digital content or document management - Digital Rights Management (DRM) - and its application to e-learning.

Lessons from silkworm cocoons for future protective materials design

 Evolved over millions of years’ natural selection, very thin and lightweight wild silkworm cocoons can protect silkworms from environmental hazards and physical attacks from predators while supporting their metabolic activity. The knowledge of structure-property-function relationship of multi-layered composite silk cocoon shells gives insight into the design of next-generation protection materials. The mechanical and thermal insulation properties of both domestic (Bombyx mori, or B. moriand Samia. cynthia, or S. cynthia) and wild (Antheraea pernyi and Antheraea mylitta, or A. pernyi and A. mylitta) silkworm cocoons were investigated. The research findings are of relevance to the bio-inspired design of new protective materials and structures.
The 180 degree peel tests and needle penetration tests were used for examining the peel resistance and needle penetration resistance of both domestic and wild silkworm cocoon walls. The temperatures inside and outside of the whole silkworm cocoons under warm, cold and windy conditions were monitored for investigating the cocoon’s thermal insulation function. Computational fluid dynamics (CFD) models were created to simulate the heat transfer through the A. pernyi cocoon wall.
The wild cocoons experienced much higher peeling peak loads than the domestic cocoon. This transfers to a maximum work-of-fracture (WOF) of about 1000 J/m2 from the A. pernyi outer layer, which was 10 times of the B. mori cocoon. The A. pernyi wild cocoon exhibited a maximum penetration force (11 N) that is 70 % higher than a woven aramid fabric. Silk sericin is shown to play a critical role in providing needle penetration resistance of the non-woven composite cocoon structure by restricting the relative motion of fibres, which prevents the sharp tip of the needle from pushing aside fibres and penetrating between them. The wild A. pernyi cocoon exhibits superior thermal buffer over the domestic B. mori cocoon. The unique structure of the A. pernyi cocoon wall with mineral crystals deposited on the cocoon outer surface, can prohibit most of the air from flowing inside of the cocoon structure, which shows strong wind resistance under windy conditions.

Multi-phase microstructure design of a novel high strength TRIP steel through experimental methodology

The multi-phase structure of a novel low-alloy transformation induced plasticity (TRIP) steel was designed through experimental analysis. The evolutions of both microstructure and mechanical properties during the two-stage heat treatment were analyzed. The phase transformations during the intercritical annealing and the isothermal bainitic transformation were investigated by means of dilatometry. It was shown that two types of C diffusion were detected during intercritical annealing and a complex microstructure was formed after heat treatment. The processing parameters were selected in such a way to obtain microstructures with systematically different volume fractions of ferrite, bainite and retained austenite. The volume fractions of ferrite and retained austenite were found to be two main factors controlling the ductility. Furthermore, a high volume fraction of C-rich retained austenite, which was stabilized at room temperature, was the origin of a TRIP effect. The resulting material demonstrates a significant improvement in the ultimate tensile strength (1077. MPa) with good uniform elongation (22.5%), as compared to conventional TRIP steels. © 2014 Elsevier B.V.

Design of endoperoxides with anti-Candida activity

Broad antifungal structure-activity relationships governing epoxy-endoperoxides 2 and 3 and their parent endoperoxides 1 are reported. Their inhibitory activity against Candida albicans in conjunction with hemolytic activity and/or growth inhibition of cultured mammalian cells are reported. This information provided guidance for the further development of endoperoxide and epoxy-endoperoxides as topical antifungal agents.

Critical design features for establishing a childhood obesity monitoring program in Australia

Efforts to combat childhood obesity in Australia are hampered by the lack of quality epidemiological data to routinely monitor the prevalence and distribution of the condition. This paper summarises the literature on issues relevant to childhood obesity monitoring and makes recommendations for implementing a school-based childhood obesity monitoring program in Australia. The primary purpose of such a program would be to collect population-level health data to inform both policy and the development and evaluation of community-based obesity prevention interventions. Recommendations are made for the types of data to be collected, data collection procedures and program management and evaluation. Data from an obesity monitoring program are crucial for directing and informing policies, practices and services, identifying subgroups at greatest risk of obesity and evaluating progress towards meeting obesity-related targets. Such data would also increase the community awareness necessary to foster change.

Qualitative assessment of bubble behaviour for central and asymmetric injection in 2D gas-solid fluidized bed using image analysis technique and CFD modelling

Bubble characteristics such as shape, size, and trajectory control the hydrodynamics and therefore heat transfer in fluidized bed reactors. Thus understanding these characteristics is very important for the design and scaleup of fluidized beds. An earlier developed Eulerian-Eulerian two-fluid model for simulating dense gas–solid two-phase flow has been used to compare the experimental data in a pseudo-two-dimensional (2-D) bed. Bubbles are injected asymmetrically by locating the nozzle at proximity to the wall, thus presenting the effect wall has on asymmetrical injection as compared to symmetrical injection. In this work, a digital image analysis technique was developed to study the bubble behaviour in a two-dimensional bubbling bed. The high-speed photography reveals an asymmetric wake formation during detachment indicating an early onset of mixing process. The wall forces acts tangentially on thebubble and has a significant impact on the bubble shape, neck formation during detachment and its trajectory through the bed. Larger bubbles drifting away from the centre with longer paths are observed. This qualitative behaviour is well predicted by CFD modelling. Asymmetric injection can significantly influence the heat and mass transfer characteristics.

Design of 1,2-dioxines with anti-Candida activity: aromatic substituted 1,2-dioxines

In an ongoing effort to rationally design new antimicrobials, 47 new 1,2-dioxines have been synthesised. Broad antifungal structure-activity relationships governing aromatically substituted epoxy-1,2-dioxines 2 and 3 and their parent 1,2-dioxines 1 were assessed primarily against the pathogenic yeast, Candida albicans, with haemolytic activity of selected examples also reported.