Cardiac structure and function in young endurance athletes and nonathletes

The purpose of this study was to examine, in male adolescents, the effects of long-term endurance training on cardiac structure and function, by adopting a cross-sectional comparison with a nonathletic control group. A total of 13 endurance-trained (EX) and seven untrained (CON) male adolescents (mean ± SE, age = 15.3 ± 0.3 and 15.2 ± 0.28 yrs, respectively) underwent echocardiography at rest to determine left ventricular enddiastolic dimension (LVD_d), left ventricular end-systolic dimension (LVD_s), left ventricular posterior wall thickness (LVPW), stroke volume (SV), and cardiac output (CO). On separate days, incremental exercise tests were conducted on a cycle ergometer to measure peak oxygen uptake (VO_2max) and anaerobic power. VO_2max was greater in the endurance group (54.4 ± 1.8 mL min^–1 kg^–1) than in the control group (45.8 ± 1.6 mL min^–1 kg^–1; p < 0.05). Mean exercise time was longer in EX (12.9 ± 0.7 min) than CON (10.4 ± 0.8 min; p < 0.05). No significant differences were noted between the two groups in resting heart rate, maximal heart rate, LVD_d, LVD_s, LVPW, SV, SV indexed, CO, and CO indexed, or in the anaerobic strength. These data provide evidence that endurance-trained adolescent males develop superior exercise performance before the cardiac remodeling that is evident in trained adult athletes.

Structure and properties of biomedical films prepared from aqueous and acidic silk fibroin solutions

Silk fibroin films are promising materials for a range of biomedical applications. To understand the effects of casting solvents on film properties, we used water (W), formic acid (FA), and trifluoroacetic acid (TFA) as solvents. We characterized molecular weight, secondary structure, mechanical properties, and degradation behavior of cast films. Significant degradation of fibroin was observed for TFA-based film compared to W and TA-based films when analyzed by SDS-PAGE. Fibroin degradation resulted in a significant reduction in tensile strength and modulus of TFA-based films. Compared to water, TFA-based films demonstrated lower water solubility (19.6% vs. 62.5% in 12 h) despite having only a marginal increase in their ß-sheet content (26.9% vs. 23.7%). On the other hand, FA-based films with 34.3% ß-sheet were virtually water insoluble. Following solubility treatment, ß-sheet content in FA-based films increased to 50.9%. On exposure to protease XIV, water-annealed FA-based films lost 74% mass in 22 days compared to only 30% mass loss by ethanol annealed FA films. This study demonstrated that a small variation in the ß-sheet percentage and random coil conformations resulted in a significant change in the rates of enzymatic degradation without alteration to their tensile properties. The film surface roughness changed with the extent of enzymatic hydrolysis.

Synthesis, x-ray structure of ferrocene bearing Bis(Zn-cyclen) complexes and the selective electrochemical sensing of TpT

The new ligand, [Fc(cyclen)₂] (5) (Fc=ferrocene, cyclen=1,4,7,10-tetraazacyclododecane), and corresponding Zn^II complex receptor, [Fc{Zn(cyclen)(CH₃OH)}₂](ClO₄)₄ (1), consisting of a ferrocene moiety bearing one Zn^II-cyclen complex on each cyclopentadienyl ring, have been designed and prepared through a multi-step synthesis. Significant shifts in the ¹H NMR signals of the ferrocenyl group, cf. ferrocene and a previously reported [Fc{Zn(cyclen)}]²⁺ derivative, indicated that the two Zn^II-cyclen units in 1 significantly affect the electronic properties of the cyclopentadienyl rings. The X-ray crystal structure shows that the two positively charged Zn^II-cyclen complexes are arranged in a trans like configuration, with respect to the ferrocene bridging unit, presumably to minimise electrostatic repulsion. Both 5 and 1 can be oxidized in 1:4 CH₂Cl₂/CH₃CN and Tris-HCl aqueous buffer solution under conditions of cyclic voltammetry to give a well defined ferrocene-centred (Fc⁰/+) process. Importantly, 1 is a highly selective electrochemical sensor of thymidilyl(3′-5′)thymidine (TpT) relative to other nucleobases and nucleotides in Tris-HCl buffer solution (pH 7.4). The electrochemical selectivity, detected as a shift in reversible potential of the Fc⁰/+ component, is postulated to result from a change in the configuration of bis(Zn^II-cyclen) units from a trans to a cis state. This is caused by the strong 1:1 binding of the two deprotonated thymine groups in TpT to different Zn^II centres of receptor 1. UV-visible spectrophotometric titrations confirmed the 1:1 stoichiometry for the 1:TpT adduct and allowed the determination of the apparent formation constant of 0.89±0.10×10⁶ M⁻¹ at pH 7.4.

Structure effect on the oxygen permeation properties of barium bismuth iron oxide membranes

In this work, we investigated the oxygen permeation properties of barium bismuth iron oxide within the family of [Ba_2−3xBi_3x−1][Fe_2xBi_1−2x]O_2+3x/2 for x = 0.17–0.60. The structure changed progressively from cubic to tetragonal and then to hexagonal as function of x in accordance with the different relative amounts of bismuth on A-site and B-site of ABO_3−δ perovskite lattices. We found that the oxygen flux and electrical conductivity correlated strongly, and it was prevalent for the cubic structure (x = 0.33–0.40) which conferred the highest oxygen flux of 0.59 ml min⁻¹ cm⁻² at 950 °C for a disk membrane x = 0.33 with a thickness of 1.2 mm. By reducing the thickness of the disk membrane to 0.8 mm, the oxygen flux increased to 0.77 ml min⁻¹ cm⁻², suggesting both surface kinetics and ion diffusion controlled oxygen flux, though the former was more prominent at higher temperatures. For disk membranes x = 0.45–0.60, the perovskite structure changed to tetragonal and hexagonal, and the oxygen flux was insignificant below 900 °C, clearly indicating electron conduction properties only. However, for two compositions with relatively high bismuth content, e.g. x = 0.55 and 0.60, there was a sudden and significant rise of oxygen permeability above 900 °C, by more than one order of magnitude. These materials changed conduction behavior from metallic to semiconductor at around 900 °C. These results suggest the advent of mixed ionic electronic conducting properties caused by the structure transition as bismuth ions changed their valence states to compensate for the oxygen vacancies formed within the perovskite lattices.

Mobility, aspiration, voice : a new structure of feeling for student equity in higher education

There is a changed ‘structure of feeling’ emerging in higher education systems, particularly in OECD nations, in response to changed social, cultural and economic arrangements. Taking a student equity perspective, the paper names this change in terms of ‘mobility’, ‘aspiration’ and ‘voice’. It argues that (1) new kinds and degrees of mobility are now a significant factor in sustaining unequal access to and experience of higher education for different student groups, (2) despite government and institutional aspirations to expand higher education, students' desires for university are not a given among new target populations and (3) while universities are seeking to enroll different students in greater numbers, the challenge now is how to give greater voice to this difference. Drawing on these themes of mobility, aspiration and voice and taking recent changes to higher education policy in Australia as the case, the paper presents a new conceptual framework for thinking about student equity in HE. The framework extends from established approaches that focus on barriers to accessing higher education in order to focus on people's capacities in relation to higher education participation.

Information structure and the flow of translation

Translators are often recommended to highly observe the natural flow of the target language of the translated texts. The use and order of discoursal aspects of texts such as thematic information, topical elements, left-dislocation, and passive voice, among others, which constitute information structure may sometimes conflict with this viewpoint. It is argued that such discoursal elements are determinant in understanding the flow of the texts in the source language and should not, therefore, be frequently switched around in the translated texts to fit the norm of the target language. The order of these linguistic elements should be maximally maintained when translating a text into a target language. It is after all the employment of such information structure units by the writer of the source text which is significant at any given point in discourse both cognitively, when processing the text, and interactionally, when communicating with the reader.

Strong population genetic structure and its management implications in the mud carp Cirrhinus molitorella, an indigenous freshwater species subject to an aquaculture and culture-based fishery

This study investigated population genetic structure and diversity of mud carp Cirrhinus molitorella, a species widely used in aquaculture and culture-based fisheries in China and Mekong River riparian countries. Seven newly developed and one published microsatellite DNA markers were used to analyse samples from six wild locations, four hatchery broodstocks and one farmed site from the Mekong, Red and Pearl Rivers. Significant genetic structure was detected in C. molitorella, with isolation-by-distance being a strong force in the Mekong. Pair-wise F_ST, Fisher's exact tests for population differentiation, permutation tests and individual-based structure analysis all support the recognition of a sample originating from Toul Krasaing Lake (Cambodia) and one between Kratie and Stung Treng (Cambodia) as distinct from the remainder of the sampled range. Samples from the main upper Mekong and the Nam Khan River were significantly differentiated, but on a time scale inferred to be short (i.e. by genetic drift, not sufficient for evolution of new microsatellite alleles). The Mekong stock of C. molitorella was strongly differentiated from those from the Red and Pearl Rivers, inferred to be on an evolutionary time scale. Finer-scale sampling is warranted to further improve the understanding of genetic interactions among fish from the Mekong and its tributaries. Detailed studies on the ecology of C. molitorella (e.g. migration pathways and preferred spawning habitats) would provide useful information to explain the patterns of genetic structure detected here, and deepen insights about evolutionary distinctiveness of the population units.

Event extraction using behaviors of sentiment signals and burst structure in social media

Significant world events often cause the behavioral convergence of the expression of shared sentiment. This paper examines the use of the blogosphere as a framework to study user psychological behaviors, using their sentiment responses as a form of ‘sensor’ to infer real-world events of importance automatically. We formulate a novel temporal sentiment index function using quantitative measure of the valence value of bearing words in blog posts in which the set of affective bearing words is inspired from psychological research in emotion structure. The annual local minimum and maximum of the proposed sentiment signal function are utilized to extract significant events of the year and corresponding blog posts are further analyzed using topic modeling tools to understand their content. The paper then examines the correlation of topics discovered in relation to world news events reported by the mainstream news service provider, Cable News Network, and by using the Google search engine. Next, aiming at understanding sentiment at a finer granularity over time, we propose a stochastic burst detection model, extended from the work of Kleinberg, to work incrementally with stream data. The proposed model is then used to extract sentimental bursts occurring within a specific mood label (for example, a burst of observing ‘shocked’). The blog posts at those time indices are analyzed to extract topics, and these are compared to real-world news events. Our comprehensive set of experiments conducted on a large-scale set of 12 million posts from Livejournal shows that the proposed sentiment index function coincides well with significant world events while bursts in sentiment allow us to locate finer-grain external world events.

Effect of surface treatment and knit structure on comfort properties of wool fabrics

The comfort properties of the pique and single jersey knitted wool fabrics were investigated using the Wool ComfortMeter (WCM). The fabrics were knitted in three cover factors and treated with either plasma or a silicone softening agent and were compared with untreated fabrics. Plasma treatment did not show significant effects on the comfort value. However, silicone polymer significantly reduced WCM values suggesting that the silicone coating reduced the number of protruding fibres on the fabric surface. Regardless of treatment used, pique fabrics showed a lower WCM value, and therefore were perceived to be more comfortable than the single jersey structure. While the effect of cover factor was not significant, in fitted model to predict the WCM value of fabrics, mass/unit area and fabric thickness were significant predictors along with fabric structure and finishing treatment.

Phase-structure effects of electrospun TiO2 nanofiber membranes on As(III) adsorption

TiO2 nanofibers (NFs) with different phases such as amorphous, anatase, mixed anatase?rutile, and rutile have been prepared by combining the electrospinning technique with the subsequent process of heat treatment or acidic-dissolution method. The obtained NFs are characterized by a Fourier transform infrared spectrometer (FT-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N2 adsorption?desorption isotherm measurements. Phase structure effects of electrospun TiO2 NFs on As(III) adsorption behaviors have been investigated. The results showed a significant effect of the phase structures of TiO2 NFs on As(III) adsorption rates and capacities. Amorphous TiO2 NFs have the highest As(III) adsorption rate and capacity in the investigated samples, which can be attributed to its higher surface area and porous volume. This research provides a simple and low-cost method for phasecontrolled fabrication of TiO2 NFs and application for effective removal of arsenic from aqueous solution.

Facile fabrication of polyolefin/carbon nanotube composites via in situ friedel-crafts polyalkylation : structure and properties

Despite major advances in addressing the dispersion of carbon nanotubes (CNTs) in polymers and their interfacial interactions, exploring a facile approach for massively creating them is still fascinating. We interestingly find that the CNT dispersion is considerably improved in polypropylene (PP), and ?19.1 wt % of PP chains were in situ chemically grafted onto CNT surfaces only using a trace of AlCl3 via a one-step melt-blending. Compared with the PP/CNT composite, adding 0.2 wt % of AlCl3 enables an increase in tensile strength and Young's modulus of 30% and 25%, respectively. Moreover, the elongation at break is almost maintained, while adding CNTs alone causes significant decreases. Additionally, 0.2 wt % AlCl3 makes the thermal degradation temperature further improved. These remarkable improvements in properties are mainly attributed to better dispersion of CNTs and enhanced interfacial compatibility. This work opens up an innovative approach for scalable preparation of polyolefin/CNT composites applying to industrial production.

Information structure and the flow of translation

Translators often follow the established conventions of translations set out by founders like Nida and Taber (1969) or Newmark (1988). The principal convention, one could say, is to adhere to the source text in form and meaning. Another major convention is to keep the flow of the translated text natural, often referred to as ‘readability’ (Baker and Saldanha, 2009; Hatim and Munday, 2004). These two conventions are hard to go together, and one of them is often flouted. To maintain the same position of discoursal elements or information structure of the source text which include thematic information, left-dislocation, contrastiveness, and passive voice in the translated text is not an easy task. This exacerbates the task especially if the source and the target language have different typological features. This paper argues that discoursal elements are determinant in understanding the flow of the texts in the source language and should not, therefore, be frequently switched around in the translated texts to fit the norm of the target language. The order of these information structure elements should be maximally maintained when translating a text into a target language. It is after all the employment of such information structure units by the writer of the source text which is significant at any given point in discourse both cognitively, when processing the text, and interactionally, when communicating with the reader.

Structure of the analgesic μ-Conotoxin KIIIA and effects on the structure and function of disulfide deletion

μ-Conotoxin μ-KIIIA, from Conus kinoshitai, blocks mammalian neuronal voltage-gated sodium channels (VGSCs) and is a potent analgesic following systemic administration in mice. We have determined its solution structure using NMR spectroscopy. Key residues identified previously as being important for activity against VGSCs (Lys7, Trp8, Arg10, Asp11, His12, and Arg14) all reside on an α-helix with the exception of Arg14. To further probe structure−activity relationships of this toxin against VGSC subtypes, we have characterized the analogue μ-KIIIA[C1A,C9A], in which the Cys residues involved in one of the three disulfides in μ-KIIIA were replaced with Ala. Its structure is quite similar to that of μ-KIIIA, indicating that the Cys1−Cys9 disulfide bond could be removed without any significant distortion of the α-helix bearing the key residues. Consistent with this, μ-KIIIA[C1A,C9A] retained activity against VGSCs, with its rank order of potency being essentially the same as that of μ-KIIIA, namely, NaV1.2 > NaV1.4 > NaV1.7 ≥ NaV1.1 > NaV1.3 > NaV1.5. Kinetics of block were obtained for NaV1.2, NaV1.4, and NaV1.7, and in each case, both kon and koff values of μ-KIIIA[C1A,C9A] were larger than those of μ-KIIIA. Our results show that the key residues for VGSC binding lie mostly on an α-helix and that the first disulfide bond can be removed without significantly affecting the structure of this helix, although the modification accelerates the on and off rates of the peptide against all tested VGSC subtypes. These findings lay the groundwork for the design of minimized peptides and helical mimetics as novel analgesics.

Combining ganglion cell topology and data of patients with glaucoma to determine a structure-function map

PURPOSE

Structure and characteristics of milled silk particles

This study examined the structure, thermal property, and ion adsorption of silk particles. The particles were prepared by attritor-bead mill combination, using alkaline (pH10) charge repulsion and surfactant steric repulsion methods. Both methods produced particles with a dominant β-sheet structure, similar to the silk fibre. There was no significant difference in the decomposition temperatures for either the silk fibre or the micro/nano silk particles. An important finding from this study is clear evidence of reduction of amorphous content during the final stage of powdering using the bead mill. As a result, despite reduction in β-sheet crystallites with the progressive milling, the relative β-sheet content actually increased during this process. However, intermolecular forces between the β-sheets reduced significantly and hence the XRD results showed significant reduction in crystallinity in nano silk particles but crystal forming segments remained with β-sheet conformations after milling. The structural change influenced the ion-adsorption property where particle-size reduction resulted in a significant increase in both the rate and volume of HCrO4- adsorption. © 2014 Elsevier B.V.