Extending the surface force apparatus capabilities by using white light interferometry in reflection

The application of surface force apparatus (SFA) capabilities in measuring interactions between surfaces over nanometer separations was described. The technique is used when both the materials are transparent. It was observed that the poorly reflecting surface produce fringes that have low contrast and low finesse. The results show that the technique is successful when the visibility of the interference fringes is maximized.

Attractive forces between surfaces : what can and cannot be learned from a jump-in study with the surface forces apparatus?

We study theoretically the dynamics of film thinning under the action of an attractive surface force near the point of a jump instability. Our approach is illustrated by modeling van der Waals and hydrophobic attractive forces. The main result is that with the hydrophobic force law reported previously it is often impossible to establish the jump separation with any certainty. The surfaces instead approach slowly from a distance which is much larger than the point where an actual jump is expected. We conclude that an attractive force measured by the static jump technique is overestimated, and we formulate principles of a new dynamic jump method. The use of this new technique would permit direct measurements of attractive forces at separations below the static jump distance down to contact of the surfaces.

Foraging trip strategies and habitat use during late pup rearing by lactating Australian fur seals

Australian fur seals (Arctocephalus pusillus doriferus) are the most conspicuous and abundant marine mammal in shelf waters of south-eastern Australia. To successfully rear offspring, the females must encounter sufficient prey on each foraging trip out of a central place for periods up to11 months each year. We investigated foraging trip strategies and habitat use by the females in three winter–spring periods, 2001–03, from four colonies that span the species’ latitudinal range and contribute 80% of pup production. Trip durations of 37 females averaged 6.1±0.5 (s.e.) days, although >90% of the seal’s time at sea was spent <150 km travel (<2 days) away. Most females exhibited strong fidelities to individually preferred hotspots Females from colonies adjacent to productive shelf-edge waters generally had shorter trips, had smaller ranges, foraged closer to colonies and exhibited less diversity in trip strategies than did those from colonies more distant from a shelf-edge. From a management perspective, there was minimal overlap (<1%) between where females foraged and a system of marine reserves established in 2007, suggesting that habitats visited by lactating Australian fur seals currently receive minimal legislative protection

Mothers adjust offspring sex to match the quality of the rearing environment

Theory predicts that mothers should adjust offspring sex ratios when the expected fitness gains or rearing costs differ between sons and daughters. Recent empirical work has linked biased offspring sex ratios to environmental quality via changes in relative maternal condition. It is unclear, however, whether females can manipulate offspring sex ratios in response to environmental quality alone (i.e. independent of maternal condition). We used a balanced within-female experimental design (i.e. females bred on both low- and high-quality diets) to show that female parrot finches (Erythrura trichroa) manipulate primary offspring sex ratios to the quality of the rearing environment, and not to their own body condition and health. Individual females produced an unbiased sex ratio on high-quality diets, but over-produced sons in poor dietary conditions, even though they maintained similar condition between diet treatments. Despite the lack of sexual size dimorphism, such sex ratio adjustment is in line with predictions from sex allocation theory because nutritionally stressed foster sons were healthier, grew faster and were more likely to survive than daughters. These findings suggest that mothers may adaptively adjust offspring sex ratios to optimally match their offspring to the expected quality of the rearing environment.

The boundary lubrication of chemically grafted and cross-linked hyaluronic acid in phosphate buffered saline and lipid solutions measured by the surface forces apparatus

High molecular weight hyaluronic acid (HA) is present in articular joints and synovial fluid at high concentrations; yet despite numerous studies, the role of HA in joint lubrication is still not clear. Free HA in solution does not appear to be a good lubricant, being negatively charged and therefore repelled from most biological, including cartilage, surfaces. Recent enzymatic experiments suggested that mechanically or physically (rather than chemically) trapped HA could function as an “adaptive” or “emergency” boundary lubricant to eliminate wear damage in shearing cartilage surfaces. In this work, HA was chemically grafted to a layer of self-assembled amino-propyl-triethoxy-silane (APTES) on mica and then cross-linked. The boundary lubrication behavior of APTES and of chemically grafted and cross-linked HA in both electrolyte and lipid 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) solutions was tested with a surface forces apparatus (SFA). Despite the high coefficient of friction (COF) of μ ≈ 0.50, the chemically grafted HA gel significantly improved the lubrication behavior of HA, particularly the wear resistance, in comparison to free HA. Adding more DOPC lipid to the solution did not improve the lubrication of the chemically grafted and cross-linked HA layer. Damage of the underlying mica surface became visible at higher loads (pressure >2 MPa) after prolonged sliding times. It has generally been assumed that damage caused by or during sliding, also known as “abrasive friction”, which is the main biomedical/clinical/morphological manifestation of arthritis, is due to a high friction force and, therefore, a large COF, and that to prevent surface damage or wear (abrasion) one should therefore aim to reduce the COF, which has been the traditional focus of basic research in biolubrication, particularly in cartilage and joint lubrication. Here we combine our results with previous ones on grafted and cross-linked HA on lipid bilayers, and lubricin-mediated lubrication, and conclude that for cartilage surfaces, a high COF can be associated with good wear protection, while a low COF can have poor wear resistance. Both of these properties depend on how the lubricating molecules are attached to and organized at the surfaces, as well as the structure and mechanical, viscoelastic, elastic, and physical properties of the surfaces, but the two phenomena are not directly or simply related. We also conclude that to provide both the low COF and good wear protection of joints under physiological conditions, some or all of the four major components of joints—HA, lubricin, lipids, and the cartilage fibrils—must act synergistically in ways (physisorbed, chemisorbed, grafted and/or cross-linked) that are still to be determined.

Recent advances in the surface forces apparatus (SFA) technique

The surface forces apparatus (SFA) has been used for many years to measure the physical forces between surfaces, such as van der Waals (including Casimir) and electrostatic forces in vapors and liquids, adhesion and capillary forces, forces due to surface and liquid structure (e.g. solvation and hydration forces), polymer, steric and hydrophobic interactions, bio-specific interactions as well as friction and lubrication forces. Here we describe recent developments in the SFA technique, specifically the SFA 2000, its simplicity of operation and its extension into new areas of measurement of both static and dynamic forces as well as both normal and lateral (shear and friction) forces. The main reason for the greater simplicity of the SFA 2000 is that it operates on one central simple-cantilever spring to generate both coarse and fine motions over a total range of seven orders of magnitude (from millimeters to ångstroms). In addition, the SFA 2000 is more spacious and modulated so that new attachments and extra parts can easily be fitted for performing more extended types of experiments (e.g. extended strain friction experiments and higher rate dynamic experiments) as well as traditionally non-SFA type experiments (e.g. scanning probe microscopy and atomic force microscopy) and for studying different types of systems.

The electrochemical surface forces apparatus : the effect of surface roughness, electrostatic surface potentials, and anodic oxide growth on interaction forces, and friction between dissimilar surfaces in aqueous solutions

We present a newly designed electrochemical surface forces apparatus (EC-SFA) that allows control and measurement of surface potentials and interfacial electrochemical reactions with simultaneous measurement of normal interaction forces (with nN resolution), friction forces (with μN resolution), and distances (with Å resolution) between apposing surfaces. We describe three applications of the developed EC-SFA and discuss the wide-range of potential other applications. In particular, we describe measurements of (1) force–distance profiles between smooth and rough gold surfaces and apposing self-assembled monolayer-covered smooth mica surfaces; (2) the effective changing thickness of anodically growing oxide layers with Å-accuracy on rough and smooth surfaces; and (3) friction forces evolving at a metal–ceramic contact, all as a function of the applied electrochemical potential. Interaction forces between atomically smooth surfaces are well-described using DLVO theory and the Hogg–Healy–Fuerstenau approximation for electric double layer interactions between dissimilar surfaces, which unintuitively predicts the possibility of attractive double layer forces between dissimilar surfaces whose surface potentials have similar sign, and repulsive forces between surfaces whose surface potentials have opposite sign. Surface roughness of the gold electrodes leads to an additional exponentially repulsive force in the force–distance profiles that is qualitatively well described by an extended DLVO model that includes repulsive hydration and steric forces. Comparing the measured thickness of the anodic gold oxide layer and the charge consumed for generating this layer allowed the identification of its chemical structure as a hydrated Au(OH)3 phase formed at the gold surface at high positive potentials. The EC-SFA allows, for the first time, one to look at complex long-term transient effects of dynamic processes (e.g., relaxation times), which are also reflected in friction forces while tuning electrochemical surface potentials.

A review of 16 years of quality control parameters at a mass-rearing facility producing Queensland fruit fly, Bactrocera tryoni

From 1996 to 2012, the mass-rearing facility at Camden (NSW, Australia) has been producing Queensland fruit flies, Bactrocera tryoni (Froggatt) (Diptera: Tephritidae). During this time, the facility has regularly recorded fly quality parameters, creating a unique data set that provides an invaluable opportunity to evaluate the interrelationships among standard quality control (QC) parameters and test for redundant QC variables. Here, we conducted an exploratory data analysis to reveal relationships among the QC parameters. We found that pupal weight, adult lifespan, and longevity under nutritional stress (i.e., survival duration without food or water) had distinct monthly trends, suggesting that these QC parameters are sensitive to seasonal conditions. Furthermore, emergence percentage, flight ability, and adult lifespan were adversely affected by the dyeing/handling/irradiation process associated with sterile insect releases. Using a multivariate approach and controlling for monthly and yearly patterns, we showed that pupal weight and egg hatch are consistently negatively related and that percentage male and emergence rates are consistently negatively related. These results suggest that these correlation pairs measure similar quality information and hence one QC variable from each pair could be dropped. Flight ability was not strongly correlated with any of the QC variables, suggesting that this QC variable remains a useful QC metric. Finally, the longevity under nutritional stress QC appears to be fairly insensitive to QCs and we suggest that it should be replaced by the standard mortality under stress test.

Method and apparatus for haptic control

The present invention provides remote interfacing utilising haptic technology. In a first aspect there is provided a haptic grasping interface comprising a plurality of finger interaction points, with actuators connected at one end to an actuator control mechanism. The mechanism is mounted remotely from the grasping interface, inverse to the finger interaction points, for manipulation of these points. The grasping points comprise pulleys which route the actuators through a cable tension and transmission system. A second aspect provides haptic augmentation to an operator, which indicates to the operator the state of a control input to a controlled device. A third aspect provides a means of simulating motion where haptic feedback is provided to a user in correspondence with the movement of the user within a pod environment.

Method and apparatus for haptic control

The present invention provides remote interfacing utilising haptic technology. In a first aspect there is provided a haptic grasping interface comprising a plurality of finger interaction points, with actuators connected at one end to an actuator control mechanism. The mechanism is mounted remotely from the grasping interface, inverse to the finger interaction points, for manipulation of these points. The grasping points comprise pulleys which route the actuators through a cable tension and transmission system. A second aspect provides haptic augmentation to an operator, which indicates to the operator the state of a control input to a controlled device. A third aspect provides a means of simulating motion where haptic feedback is provided to a user in correspondence with the movement of the user within a pod environment.