Female labour force participation, fertility and infant mortality in Australia : some empirical evidence from Granger causality tests

This study applies Granger causality tests within a multivariate error correction framework to examine the relationship between female participation rates, infant mortality rates and fertility rates for Australia using annual data from 1960 to 2000. Decomposition of variance and impulse response functions are also considered. The main findings are twofold. First, in the short run there is unidirectional Granger causality running from the fertility rate to female labour force participation and from the infant mortality rate to female labour force participation while there is neutrality between the fertility rate and infant mortality rate. Second, in the long run both the fertility rate and infant mortality rate Granger cause female labour participation.

Teaching and learning force as a representational issue : insights from a classroom video study

An enormous amount of research in the conceptual change tradition has shown the difficulty of learning fundamental science concepts, yet conceptual change schemes have failed to convincingly demonstrate improvements in supporting significant student learning. Recent work in cognitive science has challenged this purely conceptual view of learning, emphasising the role of languages, and the importance of personal and contextual aspects of  understanding science. The research described in this paper is designed around the notion that learning involves the recognition and development of students’ representational resources. In particular, we argue that difficulties with the concept of force are fundamentally representational in nature. The paper describes the planning and implementation of a classroom sequence in force that focuses on representations and their negotiation, and reports on the effectiveness of this perspective in guiding teaching and learning. Classroom sequences involving three teachers 158 2008 NARST Annual International Conference were videotaped using a combined focus on the teacher and groups of students. Video analysis software was used to code the variety of representations used, and sequences of representational negotiation. Stimulated recall interviews were conducted with teachers and students. The paper will report on the effect of this approach on teacher knowledge and pedagogy, and on student learning of force.

Obesity and pronated foot type may increase the risk of chronic plantar heel pain : a matched case-control study

Background : Chronic plantar heel pain (CPHP) is one of the most common musculoskeletal disorders of the foot, yet its aetiology is poorly understood. The purpose of this study was to examine the association between CPHP and a number of commonly hypothesised causative factors.

Methods : Eighty participants with CPHP (33 males, 47 females, mean age 52.3 years, S.D. 11.7) were matched by age (± 2 years) and sex to 80 control participants (33 males, 47 females, mean age 51.9 years, S.D. 11.8). The two groups were then compared on body mass index (BMI), foot posture as measured by the Foot Posture Index (FPI), ankle dorsiflexion range of motion (ROM) as measured by the Dorsiflexion Lunge Test, occupational lower limb stress using the Occupational Rating Scale and calf endurance using the Standing Heel Rise Test.

Results : Univariate analysis demonstrated that the CPHP group had significantly greater BMI (29.8 ± 5.4 kg/m2 vs. 27.5 ± 4.9 kg/m2; P < 0.01), a more pronated foot posture (FPI score 2.4 ± 3.3 vs. 1.1 ± 2.3; P < 0.01) and greater ankle dorsiflexion ROM (45.1 ± 7.1° vs. 40.5 ± 6.6°; P < 0.01) than the control group. No difference was identified between the groups for calf endurance or time spent sitting, standing, walking on uneven ground, squatting, climbing or lifting. Multivariate logistic regression revealed that those with CPHP were more likely to be obese (BMI ≥ 30 kg/m2) (OR 2.9, 95% CI 1.4 – 6.1, P < 0.01) and to have a pronated foot posture (FPI ≥ 4) (OR 3.7, 95% CI 1.6 – 8.7, P < 0.01).

Conclusion : Obesity and pronated foot posture are associated with CPHP and may be risk factors for the development of the condition. Decreased ankle dorsiflexion, calf endurance and occupational lower limb stress may not play a role in CPHP.

Improving the prediction of the roll separating force in a hot steel finishing mill

This paper focuses on the development of a hybrid phenomenological/inductive model to improve the current physical setup force model on a five stand industrial hot strip finishing mill. We approached the problem from two directions. In the first approach, the starting point was the output of the current setup force model. A feedforward multilayer perceptron (MLP) model was then used to estimate the true roll separating force using some other available variables as additional inputs to the model.

It was found that it is possible to significantly improve the estimation of a roll separating force from 5.3% error on average with the current setup model to 2.5% error on average with the hybrid model. The corresponding improvements for the first coils are from 7.5% with the current model to 3.8% with the hybrid model. This was achieved by inclusion, in addition to each stand's force from the current model, the contributions from setup forces from the other stands, as well as the contributions from a limited set of additional variables such as: a) aim width; b) setup thickness; c) setup temperature; and d) measured force from the previous coil.

In the second approach, we investigated the correlation between the large errors in the current model and input parameters of the model. The data set was split into two subsets, one representing the "normal" level of error between the current model and the measured force value, while the other set contained the coils with a "large" level of error. Additional set of data with changes in each coil's inputs from the previous coil's inputs was created to investigate the dependency on the previous coil.

The data sets were then analyzed using a C4.5 decision tree. The main findings were that the level of the speed vernier variable is highly correlated with the large errors in the current setup model. Specifically, a high positive speed vernier value often correlated to a large error. Secondly, it has been found that large changes to the model flow stress values between coils are correlated frequently with larger errors in the current setup force model.

Impact of chronic plantar heel pain on health-related quality of life

Background: Chronic plantar heel pain (CPHP) is common and is thought to have a detrimental impact on health-related quality of life. However, no study has used normative data or a control data set for comparison of scores. Therefore, we describe the impact of CPHP on foot-specific and general health-related quality of life by comparing CPHP subjects with controls.

Methods: Foot Health Status Questionnaire scores were compared in 80 subjects with CPHP and 80 sex- and age-matched controls without CPHP.

Results: The CPHP group demonstrated significantly poorer foot-specific quality of life, as evidenced by lower scores on the foot pain, foot function, footwear, and general foot health domains of the Foot Health Status Questionnaire. The group also demonstrated significantly poorer general health-related quality of life, with lower scores on the physical activity, social capacity, and vigor domains. In multivariate analysis, CPHP remained significantly and independently associated with Foot Health Status Questionnaire scores after adjustment for differences in body mass index. Age, sex, body mass index, and whether symptoms were unilateral or bilateral had no association with the degree of impairment in people with CPHP.

Conclusion: Chronic plantar heel pain has a significant negative impact on foot-specific and general health-related quality of life. The degree of negative impact does not seem to be associated with age, sex, or body mass index.

Teaching and learning about force with a representational focus : pedagogy and teacher change

A large body of research in the conceptual change tradition has shown the difficulty of learning fundamental science concepts, yet conceptual change schemes have failed to convincingly demonstrate improvements in supporting significant student learning. Recent work in cognitive science has challenged this purely conceptual view of learning, emphasising the role of language, and the importance of personal and contextual aspects of understanding science. The research described in this paper is designed around the notion that learning involves the recognition and development of students’ representational resources. In particular, we argue that conceptual difficulties with the concept of force are fundamentally representational in nature. This paper describes a classroom sequence in force that focuses on representations and their negotiation, and reports on the effectiveness of this perspective in guiding teaching, and in providing insight into student learning. Classroom sequences involving three teachers were videotaped using a combined focus on the teacher and groups of students. Video analysis software was used to capture the variety of representations used, and sequences of representational negotiation. Stimulated recall interviews were conducted with teachers and students. The paper reports on the nature of the pedagogies developed as part of this representational focus, its effectiveness in supporting student learning, and on the pedagogical and epistemological challenges negotiated by teachers in implementing this approach.

Fault tolerance force for redundant manipulators

Fault tolerant manipulators maintain their trajectory even if their joint/s fails. Assuming that the manipulator is fault tolerant on its trajectory, fault tolerant compliance manipulators provide required force at their end-effector even when a joint fails. To achieve this, the contributions of the faulty joints for the force of the end-effector are required to be mapped into the proper compensating joint torques of the healthy joints to maintain the force. This paper addresses the optimal mapping to minimize the force jump due to a fault, which is the maximum effort to maintain the force when a fault occurs. The paper studies the locked joint fault/s of the redundant manipulators and it relates the force jump at the end-effector to the faults within the joints. Adding on a previous study to maintain the trajectory, in here the objective is to providing fault tolerant force at the end-effector of the redundant manipulators. This optimal mapping with minimum force jump is presented using matrix perturbation model. And the force jump is calculated through this model for single and multiple joints fault. The proposed optimal mapping is used in different fault scenarios for a 5-DOF manipulator; also it is deployed to compensate the force at the end-effector for the 5-DOF manipulator through simulation study and the results are presented.