Fracture modelling of DP780 sheets using a hybrid experimental-numerical method and two-dimensional digital image correlation

This paper is concerned with the construction of fracture envelopes of DP780 sheets using two methods: a hybrid experimental-numerical method; two-dimensional digital image correlation (2D-DIC). For the hybrid method, four types of ductile fracture tests were carried out covering a wide range of stress states on specimens: with a central hole; two symmetric circular notches; flat grooved; and diagonally double-notched. Based on the fracture strain and loading paths identified with finite element simulation, a fracture envelope was obtained by employing the three-parameter modified Mohr-Coulomb fracture model. In addition, the fracture surface strain was directly measured using 2D-DIC. Loading histories of each test were extracted from a surface element of a three dimensional finite element model. The comparison of fracture envelopes constructed by the two methods reveals that there is little difference. Thus, it can be concluded that 2D-DIC is applicable to fracture modelling of DP780 sheets despite the assumption of the plane stress condition even after necking

Analysis of phasic and tonic electromyographic signal characteristics: electromyographic synthesis and comparison of novel morphological and linear-envelope approaches

The pattern of tonic and phasic components in an EMG signal reflects the underlying behaviour of the central nervous system (CNS) in controlling the musculature. One avenue for gaining a better understanding of this behaviour is to seek a quantitative characterisation of these phasic and tonic components. We propose that these signal characteristics can range between unvarying, tonic and intermittent, phasic activation through a continuum of EMG amplitude modulation. In this paper, we present two new algorithms for quantifying amplitude modulation: a linear-envelope approach, and a mathematical morphology approach. In addition we present an algorithm for synthesising EMG signals with known amplitude modulation. The efficacy of the synthesis algorithm is demonstrated using real EMG data. We present an evaluation and comparison of the two algorithms for quantifying amplitude modulation based on synthetic data generated by the proposed synthesis algorithm. The results demonstrate that the EMG synthesis parameters represent 91.9% and 96.2% of the variance of linear-envelopes extracted from lumbo-pelvic muscle EMG signals collected from subjects performing a repetitive-movement task. This depended, however, on the muscle and movement-speed considered (F=4.02, p<0.001). Coefficients of determination between input and output amplitude modulation variables were used to quantify the accuracy of the linear-envelope and morphological signal processing algorithms. The linear-envelope algorithm exhibited higher coefficients of determination than the most accurate morphological approach (and hence greater accuracy, T=8.16, p<0.001). Similarly, the standard deviation of the coefficients of determination was 1.691 times smaller (p<0.001). This signal processing algorithm represents a novel tool for the quantification of amplitude modulation in continuous EMG signals and can be used in the study of CNS motor control of the musculature in repetitive-movement tasks.

Investigating energy and indoor environmental performance of aquatic centres

Aquatic centres are popular recreational facilities in Australia and other developed countries. These buildings have experienced exponential demand over the past few decades. The growing desire for better indoor environmental quality in aquatic centres has resulted in a marked increase in energy consumption in this sector. Community expectations in relation to aquatic centres are rising and these spaces are associated with wellness and health. Energy consumption in indoor swimming pool buildings is high due to the high indoor air temperatures, increased ventilation heat losses and the need to disinfect water. This study investigates the energy consumption and indoor environmental quality of seven aquatic centres in Australia. The construction and various energy consuming systems of the facilities are analysed and compared against the energy consumption. Thermal comfort data is collected through measuring the indoor environmental parameters. Building envelopes were found to be leaky in most of the buildings resulting in energy wastage. The main indicators for energy consumption were gross floor area, area of pool surface, and number of visitors. It was found that the set point temperatures were significantly high in some of the buildings resulting in high level of discomfort for the spectators and staff.

The next step in energy rating: the international ETTV method vs. BCA Section-J glazing calculator

The most important prevention in minimizing energy transfer in commercial buildings is the treatment of glazing in the building facade. In a commercial building, while the impacts of roof, walls and floors on the overall heating and cooling loads of the building have low effects, glazing is likely to be the most important factor. This paper investigates the BCA Section-J glazing calculator and the ETTV (Envelope Thermal Transfer Value) methods and tries to look for differences as well as similarities in calculation of building envelopes energy performance. For this investigation, a hypothetical high-rise commercial building in Melbourne, Australia is considered when evaluating the energy performance of the envelope through these two methods. Both methods consider the U-Value of glass and wall materials as well as Solar Heat Gain Coefficient (SHGC) and Shading Coefficient (SC) of the glass. Findings in this research project indicate differences and significant discrepancies between the BCA Section-J and ETTV methods in evaluating the energy performance of commercial building façades. Issues of calculation weaknesses are identified with the lack of air leakage and infiltration of a particular façade design or window to wall ratio (WWR). Suggestions have been made where improvement to the overall energy calculation through facades of a commercial building is needed.

Identifying the location of fire refuges in wet forest ecosystems

The increasing frequency of large, high-severity fires threatens the survival of old-growth specialist fauna in fire-prone forests. Within topographically diverse montane forests, areas that experience less severe or fewer fires compared with those prevailing in the landscape may present unique resource opportunities enabling old-growth specialist fauna to survive. Statistical landscape models that identify the extent and distribution of potential fire refuges may assist land managers to incorporate these areas into relevant biodiversity conservation strategies. We used a case study in an Australian wet montane forest to establish how predictive fire simulation models can be interpreted as management tools to identify potential fire refuges. We examined the relationship between the probability of fire refuge occurrence as predicted by an existing fire refuge model and fire severity experienced during a large wildfire. We also examined the extent to which local fire severity was influenced by fire severity in the surrounding landscape. We used a combination of statistical approaches, including generalized linear modeling, variogram analysis, and receiver operating characteristics and area under the curve analysis (ROC AUC). We found that the amount of unburned habitat and the factors influencing the retention and location of fire refuges varied with fire conditions. Under extreme fire conditions, the distribution of fire refuges was limited to only extremely sheltered, fire-resistant regions of the landscape. During extreme fire conditions, fire severity patterns were largely determined by stochastic factors that could not be predicted by the model. When fire conditions were moderate, physical landscape properties appeared to mediate fire severity distribution. Our study demonstrates that land managers can employ predictive landscape fire models to identify the broader climatic and spatial domain within which fire refuges are likely to be present. It is essential that within these envelopes, forest is protected from logging, roads, and other developments so that the ecological processes related to the establishment and subsequent use of fire refuges are maintained.

Upper lower triassic stromatolite from Anhui, South China: geobiologic features and paleoenvironmental implications

Widespread stromatolites and other microbialite deposits characterize Lower Triassic marine successions worldwide. This study documents a stromatolite deposit, 1.1. m thick, from the upper Spathian (Lower Triassic) of the Susong area, South China. The stromatolite comprises distinct laminated domes in the basal part and columns at the upper part. Dark laminae are loosely spaced and interlayered with thicker light colored laminae. Diffusive dark colored laminae are composed of peloidal micrite that grade locally into microclotted structures, and yield copies of bacteria clump-like and coccoid-like spheroid aggregates. The former are characterized by cloudy, micrite nuclei rimmed by coarse-grained, euhedral sparry calcite crystals, while the latter are comprised of solid calcite crystal nuclei coated with rather thin micrite envelopes. The cloudy, micrite nuclei resemble bacteria clump-like structures observed in present-day travertine. Both the coccoid-like spheroids and bacteria clump-like structures are surrounded by coarse-grained euhedral calcite crystals, suggesting a similar accretion mechanism. Both spherical structures therefore could be crucial in the accretion of the Susong stromatolite. The laminated/microclotted structures are interpreted as the result of variation in timing of lithification relative to the timing of the decay of microbes. Micro-analysis also unravels the common occurrence of authigenic micro-quartz crystals in association with Fe-bearing illite clay minerals in the stromatolite columns. Their coalescing nature with each other, together with the associated pyrite grains, strongly support the formation of micro-quartz crystals from microbial reduction of an Fe-bearing smectite precursor by sulfate reducing bacteria. A comparison of the Susong stromatolite with its counterparts from the upper Lower Triassic strata in Dajiang, South China reveals many similarities in stromatolite microstructures, suggesting that a harsh, euxinic-anoxic environment resulting in the bloom of sulfate reducing bacteria most likely extended into the latest Spathian in South China.

Concordance in phylogeography and ecological niche modelling identify dispersal corridors for reptiles in arid Australia

Aim: Using the rock-specialist agamid Ctenophorus caudicinctus as a model, we test hypothesized biogeographical dispersal corridors for lizards in the Australian arid zone (across the western sand deserts), and assess how these dispersal routes have shaped phylogeographical structuring. Location: Arid and semi-arid Australia. Methods: We sequenced a c. 1400 bp fragment of mtDNA (ND2) for 134 individuals of C. caudicinctus as well as a subset of each of the mtDNA clades for five nuclear loci (BDNF, BACH1, GAPD, NTF3, and PRLR). We used phylogenetic methods to assess biogeographical patterns within C. caudicinctus, including relaxed molecular clock analyses to estimate divergence times. Ecological niche modelling (Maxent) was employed to estimate the current distribution of suitable climatic envelopes for each lineage. Results: Phylogenetic analyses identified two deeply divergent mtDNA clades within C. caudicinctus - an eastern and western clade - separated by the Western Australian sand deserts. However, divergences pre-date the Pleistocene sand deserts. Phylogenetic analyses of the nuclear DNA data sets generally support major mtDNA clades, suggesting past connections between the western C. c. caudicinctus populations in far eastern Pilbara (EP) and the lineages to the east of the sand deserts. Ecological niche modelling supports the continued suitability of climatic conditions between the Central Ranges and the far EP for C. c. graafi. Main conclusions: Estimates of lineage ages provide evidence of divergence between eastern and western clades during the Miocene with subsequent secondary contact during the Pliocene. Our results suggest that this secondary contact occurred via dispersal between the Central Ranges and the far EP, rather than the more southerly Giles Corridor. These events precede the origins of the western sand deserts and divergence patterns instead appear associated with Miocene and Pliocene climate change.