A mathematical model for the spread of streptococcus pneumoniae with transmission due to sequence type

This paper discusses a simple mathematical model to describe the spread of Streptococcus pneumoniae. We suppose that the transmission of the bacterium is determined by multi-locus sequence type. The model includes vaccination and is designed to examine what happens in a vaccinated population if MLSTs can exist as both vaccine and non vaccine serotypes with capsular switching possible from the former to the latter. We start off with a discussion of Streptococcus pneumoniae and a review of previous work. We propose a simple mathematical model with two sequence types and then perform an equilibrium and (global) stability analysis on the model. We show that in general there are only three equilibria, the carriage-free equilibrium and two carriage equilibria. If the effective reproduction number Re is less than or equal to one, then the carriage will die out. If Re > 1, then the carriage will tend to the carriage equilibrium corresponding to the multi-locus sequence type with the largest transmission parameter. In the case where both multi-locus sequence types have the same transmission parameter then there is a line of carriage equilibria. Provided that carriage is initially present then as time progresses the carriage will approach a point on this line. The results generalize to many competing sequence types. Simulations with realistic parameter values confirm the analytical results.

Death or survival from invasive pneumococcal disease in Scotland: associations with serogroups and multilocus sequence types

We describe associations between death from invasive pneumococcal disease (IPD) and particular serogroups and sequence types (STs) determined by multilocus sequence typing (MLST) using data from Scotland. All IPD episodes where blood or cerebrospinal fluid (CSF) culture isolates were referred to the Scottish Haemophilus, Legionella, Meningococcal and Pneumococcal Reference Laboratory (SHLMPRL) from January 1992 to February 2007 were matched to death certification records by the General Register Office for Scotland. This represented 5959 patients. The median number of IPD cases in Scotland each year was 292. Deaths, from any cause, within 30 days of pneumococcal culture from blood or CSF were considered to have IPD as a contributing factor. Eight hundred and thirty-three patients died within 30 days of culture of Streptococcus pneumoniae from blood or CSF [13.95 %; 95 % confidence interval (13.10, 14.80)]. The highest death rates were in patients over the age of 75. Serotyping data exist for all years but MLST data were only available from 2001 onward. The risk ratio of dying from infection due to particular serogroups or STs compared to dying from IPD due to all other serogroups or STs was calculated. Fisher’s exact test with Bonferroni adjustment for multiple testing was used. Age adjustment was accomplished using the Cochran–Mantel–Haenszel test and 95 % confidence intervals were reported. Serogroups 3, 11 and 16 have increased probability of causing fatal IPD in Scotland while serogroup 1 IPD has a reduced probability of causing death. None of the 20 most common STs were significantly associated with death within 30 days of pneumococcal culture, after age adjustment. We conclude that there is a stronger association between a fatal outcome and pneumococcal capsular serogroup than there is between a fatal outcome and ST.

Complex coacervation with whey protein isolate and gum arabic for the microencapsulation of omega-3 rich tuna oil.

Tuna oil rich in omega-3 fatty acids was microencapsulated in whey protein isolate (WPI)-gum arabic (GA) complex coacervates, and subsequently dried using spray and freeze drying to produce solid microcapsules. The oxidative stability, oil microencapsulation efficiency, surface oil and morphology of these solid microcapsules were determined. The complex coacervation process between WPI and GA was optimised in terms of pH, and WPI-to-GA ratio, using zeta potential, turbidity, and morphology of the microcapsules. The optimum pH and WPI-to-GA ratio for complex coacervation was found to be 3.75 and 3 : 1, respectively. The spray dried solid microcapsules had better stability against oxidation, higher oil microencapsulation efficiency and lower surface oil content compared to the freeze dried microcapsules. The surface of the spray dried microcapsules did not show microscopic pores while the surface of the freeze dried microcapsules was more porous. This study suggests that solid microcapsules of omega-3 rich oils can be produced using WPI-GA complex coacervates followed by spray drying and these microcapsules can be quite stable against oxidation. These microcapsules can have many potential applications in the functional food and nutraceuticals industry.

Complex coacervation between flaxseed protein isolate and flaxseed gum

Flaxseed protein isolate (FPI) and flaxseed gum (FG) were extracted, and the electrostatic complexation between these two biopolymers was studied as a function of pH and FPI-to-FG ratio using turbidimetric and electrophoretic mobility (zeta potential) tests. The zeta potential values of FPI, FG, and their mixtures at the FPI-to-FG ratios of 1:1, 3:1, 5:1, 10:1, 15:1 were measured over a pH range 8.0-1.5. The alteration of the secondary structure of FPI as a function of pH was studied using circular dichroism. The proportion of a-helical structure decreased, whereas both β-sheet structure and random coil structure increased with the lowering of pH from 8.0 to 3.0. The acidic pH affected the secondary structure of FPI and the unfolding of helix conformation facilitated the complexation of FPI with FG. The optimum FPI-to-FG ratio for complex coacervation was found to be 3:1. The critical pH values associated with the formation of soluble (pHc) and insoluble (pHΦ1) complexes at the optimum FPI-to-FG ratio were found to be 6.0 and 4.5, respectively. The optimum pH (pHopt) for the optimum complex coacervation was 3.1. The instability and dissolution of FPI-FG complex coacervates started (pHΦ2) at pH2.1. These findings contribute to the development of FPI-FG complex coacervates as delivery vehicles for unstable albeit valuable nutrients such as omega-3 fatty acids.

Microencapsulation of coupled folate and chitosan nanoparticles for targeted delivery of combination drugs to colon

Folate-chitosan nanoparticles, co-loaded with 5-fluourouacil (5-FU) and leucovorin (LV) and prepared by ionic gelation technology were physically microencapsulated by enteric polymer using a solvent evaporation method. Average particle size of the microencapsulated particles was in the range of 15 to 35 µm. High drug encapsulation efficiency was obtained for both 5-FU and LV in the microencapsulated particles. Both drugs were in amorphous state in the microencapsulated particles. By enteric coating, excellent pH-dependent release profile was achieved and no drug release was observed in simulated gastric and intestinal fluids. However, when the pH value reached the soluble threshold of Eudragit S-100, a constant and slow drug release was observed. The results indicated that these microencapsulated particles are a promising vehicle for selectively targeting drugs to colon in the chemotherapy of colon cancer.

Plasma assisted finishing of cotton fabric with chitosan

Chitosan is a natural and non-toxic polymer which can be used as a multifunctional, e.g. antimicrobial or anti-wrinkle, agent on cotton fabrics. However, due to the lack of strong bonding forces between two polysaccharides, chitosan coating on cotton has poor durability. To provide efficient and irreversible chitosan adsorption on cotton substrate, it is required to build appropriate binding sites and to activate the substrate material properly. For this purpose, plasma treatment can be a promising method as it can activate the surface of the cotton fabric and improve the adsorption of chemicals in a completely harmless procedure. In this study, we investigated the effect of atmospheric pressure plasma treatment on adsorption of chitosan onto the cotton fabric. The purpose of the study was to investigate to which extent adsorption of chitosan on cotton can be improved by helium plasma treatment. Fibre surface and adsorption of chitosan were characterized by X-ray Photoelectron Spectroscopy (XPS) and Fourier Transform Infrared (FTIR) spectroscopy. Changes in hydrophobicity of fabric`s surface and fibre morphology were evaluated using contact angle method and scanning electron microscopy (SEM), respectively. The results from XPS showed an increase in the C=O bonds on cotton fabrics oxydised by helium plasma treatmnets, confirming the formation of aldehyde groups in cellulose. The characteristic absorbance band of chitosan, amide II (N-H bending vibration) showed an enlargement for all fabrics treated with helium and chitosan, as assesed by FTIR. The absorbance peaks of CH2 stretching vibrations, which confirm chitosan existence, were stronger for all treated fabrics compared to the untreated control. While the plasma only treated fabric surface was very hydrophilic, the surface became hydrophobic after chitosan coating.

Comparison of marine macrophytes for their contributions to blue carbon sequestration

Many marine ecosystems have the capacity for long-term storage of organic carbon (C) in what are termed "blue carbon" systems. While blue carbon systems (saltmarsh, mangrove, and seagrass) are efficient at long-term sequestration of organic carbon (C), much of their sequestered C may originate from other (allochthonous) habitats. Macroalgae, due to their high rates of production, fragmentation, and ability to be transported, would also appear to be able to make a significant contribution as C donors to blue C habitats. In order to assess the stability of macroalgal tissues and their likely contribution to long-term pools of C, we applied thermogravimetric analysis (TGA) to 14 taxa of marine macroalgae and coastal vascular plants. We assessed the structural complexity of multiple lineages of plant and tissue types with differing cell wall structures and found that decomposition dynamics varied significantly according to differences in cell wall structure and composition among taxonomic groups and tissue function (photosynthetic vs. attachment). Vascular plant tissues generally exhibited greater stability with a greater proportion of mass loss at temperatures > 300 degrees C (peak mass loss -320 degrees C) than macroalgae (peak mass loss between 175-300 degrees C), consistent with the lignocellulose matrix of vascular plants. Greater variation in thermogravimetric signatures within and among macroalgal taxa, relative to vascular plants, was also consistent with the diversity of cell wall structure and composition among groups. Significant degradation above 600 degrees C for some macroalgae, as well as some belowground seagrass tissues, is likely due to the presence of taxon-specific compounds. The results of this study highlight the importance of the lignocellulose matrix to the stability of vascular plant sources and the potentially significant role of refractory, taxon-specific compounds (carbonates, long-chain lipids, alginates, xylans, and sulfated polysaccharides) from macroalgae and seagrasses for their long-term sedimentary C storage. This study shows that marine macroalgae do contain refractory compounds and thus may be more valuable to long-term carbon sequestration than we previously have considered.

Perspectives of engineered marine derived polymers for biomedical nanoparticles

Marine environment exhibits an enormous diversity of organisms which contains an abundant source of polysaccharides. As polymer matrix carriers, marine-based polymers possess several valuable properties including high stability, non-toxicity, hydrophilicity, biodegradability, with low production cost. Despite notable biological activities of these natural polymers, there are certain limitations in exploring their functions in applications of nano-sized drug delivery systems. The review aims to demonstrate exceptional characteristics of marine-based polymers including fucoidan, alginate, carrageenan, hyaluronic acid, chondroitin sulfate, and chitosan as well as provide perspectives of current publications on their nanoparticle formulations for biomedical applications.

Preparation and characterization of chia seed protein isolate-chia seed gum complex coacervates

Chia seed protein isolate (CPI) and chia seed gum (CSG) were extracted and complex coacervation between these two was studied. The pH and the CPI-to-CSG ratio were optimized to obtain the highest yield of complex coacervates underpinned by zeta potential and turbidity values. CPI-CSG complex coacervates were found to form primarily due to electrostatic interaction and remained stable within a pH range of 2.1-2.9 at ambient temperature. The optimum pH and CPI-to-CSG ratio for complex coacervation was found to be 2.7 and 6:1, respectively. Spray dried complex coacervate particles possessed smoother surface morphology compared to the freeze dried ones. CPI-CSG complex coacervates demonstrated better thermal stability as compared to that of individual CPI and CSG. The crosslinking of these complex coacervates by transglutaminase further improved their thermal stability. Therefore, the crosslinked CPI-CSG complex coacervates will be able to better protect the oxygen and heat sensitive food and pharmaceutical ingredients.

Mechanisms involved in the therapeutic effects of soybean (glycine max)

Soybeans contain nutritional and medicinal properties. It is a rich source of quality proteins, phytosterols, fibers, and other biologically active compounds, notably daidzein and genistein. Soybeans provide health benefits due to their functional ingredients such as proteins, polysaccharides, and isoflavones. These functional ingredients play a vital role in the reduction of different types of cancer, cardiovascular diseases, postmenopausal problems, diabetes, and some neurodegenerative disorders. This review primarily envisages the different mechanisms involved in the therapeutic effects of soybean components as well as their contribution toward the reduction of different diseases.

Microencapsulation of omega-3 fatty acids: a review of microencapsulation and characterization methods

To improve consumption of omega-3 fatty acids, foods can be enriched with omega-3 rich oils. Microencapsulation of omega-3 oils minimizes oxidative deterioration and allows their use in stable and easy-to-handle form. Microencapsulation of omega-3 fatty acids can be achieved by using a variety of methods, with the two most commonly used commercial processes being complex coacervation and spray dried emulsions. A variety of other methods are in development including spray chilling, extrusion coating and liposome entrapment. The key parameter in any of these processes is the selection of wall material. For spray dried emulsions and complex coacervates protein or polysaccharides are primarily used as shell material, although complex coacervation is currently commercially limited to gelatin. Here we review the need for microencapsulation of omega-3 oils, methods of microencapsulation and analysis, and the selection of shell material components. In particular, we discuss the method of complex coacervation, including its benefits and limitations. This review highlights the need for research on the fundamentals of interfacial and complexation behaviour of various proteins, gums and polyphenols to encapsulate and deliver omega-3 fatty acids, particularly with regard to broadening the range of shell materials that can be used in complex coacervation of omega-3 rich oils.

Designing self-assembled multicomponent scaffolds for regenerative medicine

This project demonstrated novel approaches to incorporate multiple bioactive peptide sequences polysaccharides and proteoglycans. Demonstrated applications for both in vitro 3D cell culture and in vivo applications; highlighting the significance of this class of biomaterial for a range of therapeutic applications and use as a new generation of regenerative materials.