Enhancing tris(2,2'-bipyridI)ruthenium(II) chemiluminescence

In this thesis, chemiluminescence, that is light from a chemical reaction, was applied to the determination of pharmaceuticals, amines, and organic acids. The detection of organic acids was improved substantially through the manipulation of the speed of reaction and the use of silver nanoparticles in both solution and solid states.

Investigations of Tris(2,2'-bipyridyl)ruthenium(II) as a chirally selective chemiluminescence reagent

Enantiomers of Tris(2,2'-bipyridyl)ruthenium(II) were selectively resolved and utilised in chiral kinetic studies. Instrumentation was designed and built for the collection of kinetic data from their chemiluminescence reactions. After testing the kinetic profiles of various enantiomerically pure analyte reagent combinations, results proved to be inconclusive and further testing is still required.

Determination of sodium oxalate in Bayer process liquors using flow analysis with tris(2,2'-bipyridyl)ruthenium(II) chemiluminescence detection

The research was a detailed investigation into a challenging analytical chemistry problem for the alumina industry. The successful outcomes were derived through innovative reagent chemistry and novel instrumental development. The resultant methodology and instrumentation deployed on this most demanding sample matrix is more robust, reliable and less expensive than anything currently used in this industry worldwide.

Detection of nitro-explosive compounds using derivatization and tris(2,2'-bipyridyl)ruthenium(II) chemiluminescence

This thesis describes a novel approach towards the trace level detection of nitramine explosives, by exploring various reduction strategies and utilising ruthenium chemiluminescence. Synthesis of novel chemiluminescence compounds has been achieved, as well as the development of a detection method for determining the shelf life of ammunition.

Electrogenerated chemiluminescence of tris(2,2' bipyridine)ruthenium(ii) using common biological buffers as co-reactant, pH buffer and supporting electrolyte

A series of aliphatic tertiary amines (HEPES, POPSO, EPPS and BIS-TRIS) commonly used to buffer the pH in biological experiments, were examined as alternative, non-toxic co-reactants for the electrogenerated chemiluminescence (ECL) of tris(2,2'-bipyridine)ruthenium(ii) ([Ru(bpy)3](2+)). These were found to be very attractive as "multi-tasking" reagents, serving not only as co-reactants, but also fulfiling the roles of pH buffer and supporting electrolyte within an aqueous environment; thus significantly simplifying the overall ECL analysis. Sub-nanomolar detection limits were obtained for [Ru(bpy)3](2+) in the presence of BIS-TRIS, making this species an valuable option for co-reactant ECL-based bioanalytical applications.

Acetylacetonato chelated ruthenium organometallics incorporating imine-phenol function: spectroscopic, structural, electrochemical and cytotoxicity studies

The heterogeneous phase reaction of Ru(η²-RL)(PPh₃)₂(CO)Cl, 1 with lithium acetylacetonate (Liacac) afforded the complexes of the type Ru(η¹-RL)(PPh₃)₂(CO)(acac), 2 in excellent yield where η²-RL is C₆H₂O-2-CHNHC₆H₄R(p)-3-Me-5 and η¹-RL is C₆H₂OH-2-CHNC₆H₄R(p)-3-Me-5 and R is H, Me, Cl. The chelation of acac is attended with the cleavage of Ru-O and Ru-Cl bonds and iminium-phenolato → imine-phenol prototropic shift. A sterically controlled change in rotational conformation is involved in the 1 → 2 conversion. The conversion is irreversible and the type 2 species are thermodynamically more stable than the carboxylate, nitrite and nitrate complexes of 1. The crystal structures of Ru(η¹-MeL)(PPh₃)₂(CO)(acac), 2(Me) and Ru(η¹-ClL)(PPh₃)₂(CO)(acac), 2(Cl) are reported. Spectral (UV-Vis, IR, ¹H NMR) and electrochemical data of the complexes are also reported. The electronic structure and the absorption spectra of the complexes are scrutinized by the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) analyses. The complexes were also screened in vitro for their antiproliferative properties against the MCF-7 breast cancer cell lines by using the MTT assay. Flow cytometric analysis showed that the complexes arrested the cell cycle in the sub G0 phase.

Annihilation electrogenerated chemiluminescence of mixed metal chelates in solution : Modulating emission colour by manipulating the energetics

We demonstrate the mixed annihilation electrogenerated chemiluminescence of tris(2,2′-bipyridine)ruthenium(ii) with various cyclometalated iridium(iii) chelates. Compared to mixed ECL systems comprising organic luminophores, the absence of T-route pathways enables effective predictions of the observed ECL based on simple estimations of the exergonicity of the reactions leading to excited state production. Moreover, the multiple, closely spaced reductions and oxidations of the metal chelates provide the ability to finely tune the energetics and therefore the observed emission colour. Distinct emissions from multiple luminophores in the same solution are observed in numerous systems. The relative intensity of these emissions and the overall emission colour are dependent on the particular oxidized and reduced species selected by the applied electrochemical potentials. Finally, these studies offer insights into the importance of electronic factors in the question of whether the reduced or oxidized partner becomes excited in annihilation ECL. This journal is

Effect of oxidant type on the chemiluminescence intensity from the reaction of tris(2,2’-biyridyl)ruthenium(III) with various organic acids

An investigation into the chemiluminescence of fourteen organic acids and tris(2,2′-bipyridyl)ruthenium(II) was undertaken. Particular emphasis was placed upon the method of production of the reagent, tris(2,2′-bipyridyl)ruthenium(III), with cerium(IV) sulfate, potassium permanganate, lead dioxide and electrochemical generation. Analytically useful chemiluminescence was observed when Ce(IV) or potassium permanganate were employed as oxidants. The kinetics of analyte oxidation was related to the intensity of the chemiluminescence emission, which increased by three orders of magnitude for tartaric acid after 40 h of oxidation.

Chemiluminescence detection of MDMA in street drug samples using tris (2,2'-bipyridine) ruthenium (III)

Tris(2,2'-bipyridine)ruthenium(II) chemiluminescence was investigated for the detection of 3,4-methylenedioxymethamphetamine (MDMA) and several related compounds in street drug samples. Optimization using flow injection analysis showed that the selectivity of the reagent can be targeted towards the detection of secondary amines by altering the pH of the reaction environment. The greater selectivity of this mode of detection, compared to UV-absorbance, reduces the probability of false positive results from interfering compounds. The detection limit for MDMA under these conditions was 0.48 μM. A HPLC method incorporating post-column tris(2,2'-bipyridine)ruthenium(II) chemiluminescence detection was applied to the determination of MDMA in five street drug samples. The results obtained were in good agreement with quantification performed using traditional UV-absorbance detection, which demonstrates the viability of this method for confirmatory analysis of drug samples. This is the first report of tris(2,2'-bipyridine)ruthenium(II) chemiluminescence for the detection of MDMA and related amphetamine derivatives.

Mobile phone-based electrochemiluminescence sensing exploiting the 'USB On-The-Go' protocol

A low-cost system to generate, control and detect electrochemiluminescence using a mobile smartphone is described. A simple tone-detection integrated circuit is used to switch power sourced from the phone's Universal Serial Bus (USB) 'On-The-Go' (OTG) port, using audible tone pulses played over the device's audio jack. We have successfully applied this approach to smartphones from different manufacturers and with different operating system versions. ECL calibrations of a common luminophore, tris(2,2′-bipyridine)ruthenium(II) ([Ru(bpy)3]²⁺), with 2-(dibutylamino)ethanol (DBAE) as a co-reactant, showed no significant difference in light intensities when an electrochemical cell was controlled by a mobile phone in this manner, compared to the same calibration generated using a conventional potentiostat. Combining this novel approach to control the applied potential with the measurement of the emitted light through the smart phone camera (using an in-house built Android app), we explored the ECL properties of a water-soluble iridium(III) complex that emits in the blue region of the spectrum. The iridium(III) complex exhibited superior co-reactant ECL intensities and limits of detection to that of the conventional [Ru(bpy)3]²⁺ luminophore.

Synthesis, structure and spectral properties of dithiocarbamato bridged dirhenium(III,II) complexes: a combined experimental and theoretical study

Sodium salts of dimethyldithiocarbamate, diethyldithiocarbamate and pyrrolidinedithiocarbamate react with the multiply bonded paramagnetic dirhenium(III,II) complex Re₂(μ-O₂CCH₃)Cl₄(μ-dppm)₂, 1 (dppm = Ph₂PCH₂PPh₂) in refluxing ethanol to afford the paramagnetic substitution products of the type Re₂(η²-S,S)₂(μ-S,S)(μ-Cl)₂(μ-dppm), where S,S represents the dithiocarbamato ligands [S,S = S₂CNMe₂, 4(L_Me); S₂CNEt₂, 4(L_Et) and S₂CN(CH₂)₄, 4(L_Pyr)]. These are the first examples of dirhenium complexes that contain bridging dithiocarbamato ligand along with the dppm ligand. These complexes have very similar spectral (UV-Vis, IR, EPR) and electrochemical properties which are also reported. The identity of 4(L_Et) has been established by single-crystal X-ray structure determination (Re-Re distance 2.6385 (9) Å) and is shown to have edge-shared bioctahedral structure. The electronic structure and the absorption spectra of the complexes are scrutinized by the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) analyses.

New perspectives on the annihilation electrogenerated chemiluminescence of mixed metal complexes in solution

Preliminary explorations of the annihilation electrogenerated chemiluminescence (ECL) of mixed metal complexes have revealed opportunities to enhance emission intensities and control the relative intensities from multiple luminophores through the applied potentials. However, the mechanisms of these systems are only poorly understood. Herein, we present a comprehensive characterisation of the annihilation ECL of mixtures of tris(2,2′-bipyridine)ruthenium(ii) hexafluorophosphate ([Ru(bpy)3](PF6)2) and fac-tris(2-phenylpyridine)iridium(iii) ([Ir(ppy)3]). This includes a detailed investigation of the change in emission intensity from each luminophore as a function of both the applied electrochemical potentials and the relative concentrations of the two complexes, and a direct comparison with two mixed (Ru/Ir) ECL systems for which emission from only the ruthenium-complex was previously reported. Concomitant emission from both luminophores was observed in all three systems, but only when: (1) the applied potentials were sufficient to generate the intermediates required to form the electronically excited state of both complexes; and (2) the concentration of the iridium complex (relative to the ruthenium complex) was sufficient to overcome quenching processes. Both enhancement and quenching of the ECL of the ruthenium complex was observed, depending on the experimental conditions. The observations were rationalised through several complementary mechanisms, including resonance energy transfer and various energetically favourable electron-transfer pathways.