Synthetic evaluation method for bridge priority ranking

In order to maintain the transportation operation, proper monitoring systems should be established on road structures, especially bridges. Since these systems need enormous investments, only a part of bridges should be equipped. Thus, the priorities of the bridges should be ranked. In this paper, a method based on two-level synthetic evaluation is proposed. First, the importance of each bridge is analyzed through the economic analysis. Six factors are considered for the bridges in a network, including construction cost, service duration, length, location importance coefficient, traffic volume, and reconstruction time. Second, the safety condition of the bridge is evaluated by using improved entropy method (IEM) which combines subjective weight with objective entropy weight. Five indices are incorporated in this step, i.e., design and construction condition, technical condition, level of overloading, hazard of wind and earthquake and environmental factors. Finally, the priorities of all the bridge in one network can be ranked and classified through a judge matrix. To demonstrate the effectiveness of the proposed method, a main highway including 16 bridges is taken as an illustrative example. The results show that the bridges can be ranked and classified quickly by using the proposed method.

Crossing the bridge: the first-person and time

Personal identity theory has become increasingly sensitive to the importance of the first-person perspective. However, certain ways of speaking about that perspective do not allow the full temporal aspects of first-person perspectives on the self to come into view. In this paper I consider two recent phenomenologically-informed discussions of personal identity that end up yielding metaphysically divergent views of the self: those of Barry Dainton and Galen Strawson. I argue that when we take a properly temporally indexical view of the first-person perspective, and thereby resist the assumption that phenomenally figured and theoretically-figured identity claims must have a common object, the metaphysically awkward accommodations each of these authors is compelled to make cease to be necessary.

Simulation and evaluation of HERIC and H5 transformerless inverter topologies

Most of the inverters have an isolation transformer which prevents or limits fault current between AC and DC circuits under most fault conditions. If the transformer is excluded from the system, it would increase the PV system efficiency and decrease the size of its installations, which will lead to a lower cost for the whole investment. Thus, elimination of the transformer has to be considered carefully because a galvanic connection appears between the PV arrays and the ground in the absence of an isolation transformer. The galvanic connection causes the stray capacitance between the PV arrays structure and the ground to produce a leakage current. In this paper, a review of full bridge topology with bipolar and unipolar scheme and half bridge topology carried out in regard leakage current.in addition, HERIC and H5 topologies are simulated and leakage current in these topologies are evaluated.

The microbiological and sustainability effects of washing anaesthesia breathing circuits less frequently

In the presence of single-use airway filters, we quantified anaesthetic circuit aerobic microbial contamination rates when changed every 24 h, 48 h and 7 days. Microbiological samples were taken from the interior of 305 anaesthetic breathing circuits over a 15-month period (3197 operations). There was no significant difference in the proportion of contaminated circuits when changed every 24 h (57/105 (54%, 95% CI 45–64%)) compared with 48 h (43/100 (43%, 95% CI 33–53%, p = 0.12)) and up to 7 days (46/100 (46%, 95% CI 36–56%, p = 0.26)). Median bacterial counts were not increased at 48 h or 7 days provided circuits were routinely emptied of condensate. Annual savings for one hospital (six operating theatres) were $AU 5219 (£3079, €3654, $US 4846) and a 57% decrease in anaesthesia circuit steriliser loads associated with a yearly saving of 2760 kWh of electricity and 48 000 l of water. Our findings suggest that extended circuit use from 24 h up to 7 days does not significantly increase bacterial contamination, and is associated with labour, energy, water and financial savings.

Rectenna circuits for RF energy harvesting in miniature DBS devices.

 Development of an optimum rectenna for radio frequency energy harvesting in miniature head-mountable deep brain stimulation (DBS) devices. The designed miniature rectenna can operate a DBS device without battery for murine preclinical research. The battery-less operation of the device eliminates battery related difficulties.

Characterization and optimization to improve uneven surface on MEMS bridge fabrication

This paper presents an optimized fabrication method for developing a freestanding bridge for RF MEMS switches. In this method, the sacrificial layer is patterned and hard baked a 220°C for 3min, after filling the gap between the slots of the coplanar waveguide. Measurement results by AFM and SEM demonstrate that this technique significantly improves the planarity of the sacrificial layer, reducing the uneven surface to less than 20nm, and the homogeneity of the Aluminum thickness across the bridge. Moreover, a mixture of O2, Ar and CF4 was used and optimized for dry releasing of the bridge. A large membrane (200×100μm2) was released without any surface bending. Therefore, this method not only simplifies the fabrication process, but also improves the surface flatness and edge smoothness of the bridge. This fabrication method is fully compatible with standard silicon IC technology.

The swimmer (The Bridge Project)

The Bridge Project (The Swimmer). The project produces two substantive outcomes: 1. The creation of a (multi-projection) video installation work for the Kingston Art Centre. The work transforms a redundant 3rd story walk-bridge into a virtual swimming pool. 2. In the process of transforming the walk-bridge, the project creates a new permanent and highly visible exhibition space for artists working in digital media. This allows the possibility for producing a series of works (or “outputs” if you like) that respond to the site and its cultural setting. It also provides an exhibition space for other staff and students working in digital media.

Fabrication of force sensor circuits on wearable conductive textiles

This paper discusses design and fabrication processes in the development of a wearable and flexible conductive resistive sensor. The design and development of the sensor involve the use of Sn-Ag-Cu (SAC)plated Nylon fabric, precisionfused deposition modeling(FDM) using silicone and petrolatum for etch-resistant masks using the EnvisionTEC GmbH Bioplotter, and wet etching using Chromium, Ammonium Persulphate, and Salt-Vinegar etching solutions. Preliminary testing with other mask types, development processes, and sensor design approaches for various applications are discussed.