Stochastic atmospheric assistance and the use of emergency staging sites by migrants

Numerous animals move vast distances through media with stochastic dynamic properties. Avian migrants must cope with variable wind speeds and directions en route, which potentially jeopardize fine-tuned migration routes and itineraries. We show how unpredictable winds affect flight times and the use of an intermediate staging site by red knots (Calidris canutus canutus) migrating from west Africa to the central north Siberian breeding areas via the German Wadden Sea. A dynamic migration model incorporating wind conditions during flight shows that flight durations between Mauritania and the Wadden Sea vary between 2 and 8 days. The number of birds counted at the only known intermediate staging site on the French Atlantic coast was strongly positively correlated with simulated flight times. In addition, particularly light-weight birds occurred at this location. These independent results support the idea that stochastic wind conditions are the main driver of the use of this intermediate stopover site as an emergency staging area. Because of the ubiquity of stochastically varying media, we expect such emergency habitats to exist in many other migratory systems, both airborne and oceanic. Our model provides a tool to quantify the effect of winds and currents en route.

Concentrations of major grass group 5 allergens in pollen grains and atmospheric particles : implications for hay fever and allergic asthma sufferers sensitized to grass pollen allergens

Background

Grass pollen allergens are the most important cause of hay fever and allergic asthma during summer in cool temperate climates. Pollen counts provide a guide to hay fever sufferers. However, grass pollen, because of its size, has a low probability of entering the lower airways to trigger asthma. Yet, grass pollen allergens are known to be associated with atmospheric respirable particles.
Objective

We aimed (1) to determine the concentration of group 5 major allergens in (a) pollen grains of clinically important grass species and (b) atmospheric particles (respirable and nonrespirable) and (2) to compare the atmospheric allergen load with clinical data to assess different risk factors for asthma and hay fever.
Methods

We have performed a continuous 24 h sampling of atmospheric particles greater and lower than 7.2 μm in diameter during the grass pollen season of 1996 and 1997 (17 October 1996–16 January 1997) by means of a high volume cascade impactor at a height of about 15 m above ground in Melbourne. Using Western analysis, we assessed the reactivity of major timothy grass allergen Phl p 5 specific monoclonal antibody (MoAb) against selected pollen extracts. A MoAb-based ELISA was then employed to quantify Phl p 5 and cross-reactive allergens in pollen extracts and atmospheric particles larger and smaller than 7.2 μm.
Results

Phl p 5-specific MoAb detected group 5 allergens in tested grass pollen extracts, indicating that the ELISA employed here determines total group 5 allergen concentrations. On average, 0.05 ng of group 5 allergens were detectable per grass pollen grain. Atmospheric group 5 allergen concentrations in particles > 7.2 μm were significantly correlated with grass pollen counts (rs = 0.842, P < 0.001). On dry days, 37% of the total group 5 allergen load, whereas upon rainfall, 57% of the total load was detected in respirable particles. After rainfall, the number of starch granule equivalents increased up to 10-fold; starch granule equivalent is defined as a hypothetical potential number of airborne starch granules based on known pollen count data. This indicates that rainfall tended to wash out large particles and contributed to an increase in respirable particles containing group 5 allergens by bursting of pollen grains. Four day running means of group 5 allergens in respirable particles and of asthma attendances (delayed by 2 days) were shown to be significantly correlated (P < 0.001).
Conclusion

Here we present, for the first time, an estimation of the total group 5 allergen content in respirable and nonrespirable particles in the atmosphere of Melbourne. These results highlight the different environmental risk factors for hay fever and allergic asthma in patients, as on days of rainfall following high grass pollen count, the risk for asthma sufferers is far greater than on days of high pollen count with no associated rainfall. Moreover, rainfall may also contribute to the release of allergens from fungal spores and, along with the release of free allergen molecules from pollen grains, may be able to interact with other particles such as pollutants (i.e. diesel exhaust carbon particles) to trigger allergic asthma.

Immunologic significance of respirable atmospheric starch granules containing major birch allergen Bet v 1

Background: Birch-pollen allergens are an important cause of early spring hay fever and allergic asthma. Recently, we reported a mechanism for the release of respirable allergenic particles from birch pollen containing the major allergen Bet v 1. In this study, we aimed to assess the immunologic significance of the released Bet v 1-containing starch granules in the environment.

Methods: A two-site monoclonal antibody-based assay (ELISA) was employed to quantitate Bet v 1 in high-volume air sampler filter extracts, and immunogold-labelling was used on sections of these extracts to localize Bet v 1. Immunoblot analyses were performed with pooled sera from patients sensitive to birch pollen.

Results: Atmospheric starch granules contained Bet v 1, and the concentration increased upon light rainfall. Sera from patients allergic to birch allergens recognized extracts from isolated starch granules.

Conclusions: The clinical implications of these findings are that starch granules released from birch pollen are potentially able to trigger allergic asthmatic reactions to Bet v 1, since the allergen occurs in respirable particles. Thus, clinicians can advise asthma patients to remain indoors on days of light rainfall during the birch-pollen season to avoid high levels of allergen exposure.

Atmospheric news stinger

A stinger made on synths.

Effect of atmospheric plasma treatment on pad-dyeing of natural dyes on wool

Plasma treatment is an emerging surface modification technique that alters dye uptake of wool without using chemicals or water for pre-treatment. Padding is an established continuous dyeing technique known for its efficient use of water, time and energy. This study combined these two techniques for colouration of wool fabric using two natural dyes derived from the Acacia plant family. The investigation focused on the effects of plasma treatment and obtaining unique patterning effects. Helium (100%) and a mixture of helium and nitrogen (95%/5%) were used as the plasma gases under atmospheric conditions. Plasma treated wool fabric was padded with the above natural dyes. Copper sulphate and ferrous sulphate were applied on the dyed fabric as mordant yielding neutral shades of beige and grey respectively. Up to a 30% enhancement of dye adsorption on plasma treated wool substrate was observed as compared to untreated sample for both gases used. This higher adsorption indicates the hydrophilic character of the natural dyes used. Key performance parameters such as fastness to washing, rubbing and light were tested and found to be satisfactory. A single process tone-on-tone pattern was achieved by controlling the plasma exposure of treated area. This study concluded that a merger of natural dyes with modern plasma treatment and padding techniques for wool colouration was feasible.

Influence of atmospheric helium plasma on the surface energy of jute fibres and the performance of resulting composites

In this work, an atmospheric pressure glow discharge helium plasma treatment was employed to modify the surface properties of jute fibres. The resulting bio-composites showed an increase in flexural properties and interlaminar shear strength (ILSS) compared to composites produced using untreated jute fibres. To understand the reason behind the ILSS improvement, the acid–base properties of jute fibres were determined by contact angle analysis using the capillary rise method. The results were fitted further to van Oss–Chaudhury–Good (vOCG) and Chang–Qin–Chen (CQC) models to determine the Lifshitz–van der Waals (LW) and acid–base components of surface energy. Surface energy determined by the vOCG model revealed that plasma treatment of jute fibre resulted in a 22% increase in total surface energy, a 19% increase in the LW component and a 24% increase in the acid–base component of surface energy. The increase in the acid–base component is due to the significant increase (69%) in the electron-accepting (γ+S) parameter. On the other hand, the CQC model clearly indicates an amphoteric nature of the fibre surface based on opposite signs of the acid and base principal values (PSa and PSb). Overall, the results indicated that increases in both LW and acid–base components were responsible for improvement in the properties of the composites.

The role of unbound oligomers in the nucleation and growth of electrodeposited polypyrrole and method for preparing high strength, high conductivity films

Polypyrrole is a material with immensely useful properties suitable for a wide range of electrochemical applications, but its development has been hindered by cumbersome manufacturing processes. Here we show that a simple modification to the standard electrochemical polymerization method produces polypyrrole films of equivalently high conductivity and superior mechanical properties in one-tenth of the polymerization time. Preparing the film as a series of electrodeposited layers with thorough solvent washing between layering was found to produce excellent quality films even when layer deposition was accelerated by high current. The washing step between the sequentially polymerized layers altered the deposition mechanism, eliminating the typical dendritic growth and generating nonporous deposits. Solvent washing was shown to reduce the concentration of oligomeric species in the near-electrode region and hinder the three-dimensional growth mechanism that occurs by deposition of secondary particles from solution. As artificial muscles, the high density sequentially polymerized films produced the highest mechanical work output yet reported for polypyrrole actuators.