INVENTORY CONTROL SYSTEM : Optimization of production system and reliability

The main idea of this research to solve the problem of inventory management for the paper industry SPM PVT limited. The aim of this research was to find a methodology by which the inventory of raw material could be kept at minimum level by means of buffer stock level.The main objective then lies in finding the minimum level of buffer stock according to daily consumption of raw material, finding the Economic Order Quantity (EOQ) reorders point and how much order will be placed in a year to control the shortage of raw material.In this project, we discuss continuous review model (Deterministic EOQ models) that includes the probabilistic demand directly in the formulation. According to the formula, we see the reorder point and the order up to model. The problem was tackled mathematically as well as simulation modeling was used where mathematically tractable solution was not possible.The simulation modeling was done by Awesim software for developing the simulation network. This simulation network has the ability to predict the buffer stock level based on variable consumption of raw material and lead-time. The data collection for this simulation network is taken from the industrial engineering personnel and the departmental studies of the concerned factory. At the end, we find the optimum level of order quantity, reorder point and order days.

Health care providers' perceptions of and attitudes towards induced abortions in sub-Saharan Africa and Southeast Asia : a systematic literature review of qualitative and quantitative data.

BACKGROUND: Unsafe abortions are a serious public health problem and a major human rights issue. In low-income countries, where restrictive abortion laws are common, safe abortion care is not always available to women in need. Health care providers have an important role in the provision of abortion services. However, the shortage of health care providers in low-income countries is critical and exacerbated by the unwillingness of some health care providers to provide abortion services. The aim of this study was to identify, summarise and synthesise available research addressing health care providers' perceptions of and attitudes towards induced abortions in sub-Saharan Africa and Southeast Asia. METHODS: A systematic literature search of three databases was conducted in November 2014, as well as a manual search of reference lists. The selection criteria included quantitative and qualitative research studies written in English, regardless of the year of publication, exploring health care providers' perceptions of and attitudes towards induced abortions in sub-Saharan Africa and Southeast Asia. The quality of all articles that met the inclusion criteria was assessed. The studies were critically appraised, and thematic analysis was used to synthesise the data. RESULTS: Thirty-six studies, published during 1977 and 2014, including data from 15 different countries, met the inclusion criteria. Nine key themes were identified as influencing the health care providers' attitudes towards induced abortions: 1) human rights, 2) gender, 3) religion, 4) access, 5) unpreparedness, 6) quality of life, 7) ambivalence 8) quality of care and 9) stigma and victimisation. CONCLUSIONS: Health care providers in sub-Saharan Africa and Southeast Asia have moral-, social- and gender-based reservations about induced abortion. These reservations influence attitudes towards induced abortions and subsequently affect the relationship between the health care provider and the pregnant woman who wishes to have an abortion. A values clarification exercise among abortion care providers is needed.

The Importance of Work-Life Balance Opportunities and Support from the Perspective of Nursing Stu-dents in Dalarna, Sweden

There is a shortage of nurses leading to challenges in recruitment in Sweden and many other countries. Especially for less populated regions recruitment can be chal-lenging. Nurses often face difficulties with work-life balance (WLB). This study aims to identify the importance of WLB opportunities and support that make a work-place attractive from the perspective of nursing students studying in Dalarna. A questionnaire was distributed via email to 525 students enrolled in the nursing bach-elor program at Dalarna University. They were asked to rate the importance of 15 sub questions regarding WLB opportunities and support. These sub questions were asked in order to analyze the importance of 15 components regarding WLB oppor-tunities and support. 196 students (37 percent) answered the questionnaire. Three WLB components, working from home, childcare and rooms for breastfeeding, were found to be not important to nursing students studying in Dalarna. This was reason-able due to the profession of nursing and the WLB support provided by the Swedish government. Cultural factors, such as the organization being positive towards using WLB opportunities and support, were more important than structural factors, such as the possibility to work part-time. Moreover, to have a manager that is supportive towards using WLB opportunities and support was found to be the most important factor and having workplace practical support such as childcare was found least im-portant. Furthermore, contrary to the expected results, no statistical significance was found on the influence on the importance of all combined relevant WLB opportuni-ties and support by the sociodemographic variables; gender, semester of studies, age, having children, months of work experience and work experience in the healthcare sector. However, nine individual components were found to be influ-enced by one or more sociodemographic variables. Therefore, some recommenda-tions on how to target specific groups of individuals were made. However, the con-clusion of the study is that, regardless of the sociodemographic variables and gov-ernmental support, organizations should offer new nurses opportunities and support to gain a balance between work and life, especially in terms of cultural factors.

Design and application of experimental methods for steel sheet shearing

Shearing is the process where sheet metal is mechanically cut between two tools. Various shearing technologies are commonly used in the sheet metal industry, for example, in cut to length lines, slitting lines, end cropping etc. Shearing has speed and cost advantages over competing cutting methods like laser and plasma cutting, but involves large forces on the equipment and large strains in the sheet material. The constant development of sheet metals toward higher strength and formability leads to increased forces on the shearing equipment and tools. Shearing of new sheet materials imply new suitable shearing parameters. Investigations of the shearing parameters through live tests in the production are expensive and separate experiments are time consuming and requires specialized equipment. Studies involving a large number of parameters and coupled effects are therefore preferably performed by finite element based simulations. Accurate experimental data is still a prerequisite to validate such simulations. There is, however, a shortage of accurate experimental data to validate such simulations. In industrial shearing processes, measured forces are always larger than the actual forces acting on the sheet, due to friction losses. Shearing also generates a force that attempts to separate the two tools with changed shearing conditions through increased clearance between the tools as result. Tool clearance is also the most common shearing parameter to adjust, depending on material grade and sheet thickness, to moderate the required force and to control the final sheared edge geometry. In this work, an experimental procedure that provides a stable tool clearance together with accurate measurements of tool forces and tool displacements, was designed, built and evaluated. Important shearing parameters and demands on the experimental set-up were identified in a sensitivity analysis performed with finite element simulations under the assumption of plane strain. With respect to large tool clearance stability and accurate force measurements, a symmetric experiment with two simultaneous shears and internal balancing of forces attempting to separate the tools was constructed. Steel sheets of different strength levels were sheared using the above mentioned experimental set-up, with various tool clearances, sheet clamping and rake angles. Results showed that tool penetration before fracture decreased with increased material strength. When one side of the sheet was left unclamped and free to move, the required shearing force decreased but instead the force attempting to separate the two tools increased. Further, the maximum shearing force decreased and the rollover increased with increased tool clearance. Digital image correlation was applied to measure strains on the sheet surface. The obtained strain fields, together with a material model, were used to compute the stress state in the sheet. A comparison, up to crack initiation, of these experimental results with corresponding results from finite element simulations in three dimensions and at a plane strain approximation showed that effective strains on the surface are representative also for the bulk material. A simple model was successfully applied to calculate the tool forces in shearing with angled tools from forces measured with parallel tools. These results suggest that, with respect to tool forces, a plane strain approximation is valid also at angled tools, at least for small rake angles. In general terms, this study provide a stable symmetric experimental set-up with internal balancing of lateral forces, for accurate measurements of tool forces, tool displacements, and sheet deformations, to study the effects of important shearing parameters. The results give further insight to the strain and stress conditions at crack initiation during shearing, and can also be used to validate models of the shearing process.

Experimental study of strain fields during shearing of medium and high-strength steel sheet

There is a shortage of experimentally determined strains during sheet metal shearing. These kinds of data are a requisite to validate shearing models and to simulate the shearing process. In this work, strain fields were continuously measured during shearing of a medium and a high strength steel sheet, using digital image correlation. Preliminary studies based on finite element simulations, suggested that the effective surface strains are a good approximation of the bulk strains below the surface. The experiments were performed in a symmetric set-up with large stiffness and stable tool clearances, using various combinations of tool clearance and clamping configuration. Due to large deformations, strains were measured from images captured in a series of steps from shearing start to final fracture. Both the Cauchy and Hencky strain measures were considered, but the difference between these were found negligible with the number of increments used (about 20 to 50). Force-displacement curves were also determined for the various experimental conditions. The measured strain fields displayed a thin band of large strain between the tool edges. Shearing with two clamps resulted in a symmetric strain band whereas there was an extended area with large strains around the tool at the unclamped side when shearing with one clamp. Furthermore, one or two cracks were visible on most of the samples close to the tool edges well before final fracture. The fracture strain was larger for the medium strength material compared with the high-strength material and increased with increasing clearance.

Reindeer habitat selection under the risk of brown bear predation during calving season

The depredation of semi-domesticated reindeer by large carnivores reflects an important human-wildlife conflict in Fennoscandia. Recent studies have revealed that brown bears (Ursus arctos) may kill substantial numbers of reindeer calves (Rangifer tarandus tarandus) in forest areas in Sweden. Several authors have suggested that predation risk is an important driver of habitat selection in wild Rangifer populations where predation is a limiting factor, but little is known about these mechanisms in semi-domesticated populations. We examined the habitat selection of female reindeer in relation to spatial and temporal variations in brown bear predation risk on the reindeer calving grounds and evaluated the simultaneous responses of brown bears and reindeer to landscape characteristics. We used GPS data from 110 reindeer years (97 individuals) and 29 brown bear years (19 individuals), from two reindeer herding districts in the forest area of northern Sweden. Our results did not indicate that reindeer alter their behavior in response to spatiotemporal variation in brown bear predation risk, on the scale of the calving range. Instead, we suggest that spatiotemporal behavioral adjustments by brown bears were the main driver of prey-predator interactions in our study system. Contrasting responses by brown bears and reindeer to clear-cuts and young forest indicate that forestry can influence species interactions and possibly yield negative consequences for the reindeer herd. Even if clear-cuts may be beneficial in terms of calf survival, logging activity will eventually cause greater abundance of young regenerating forest, reducing available reindeer habitats and increasing habitat preferred by brown bears. Domestication may have made semi-domesticated reindeer in Fennoscandia less adapted to cope with predators. Areal restrictions, limiting the opportunity for dispersion and escape, possibly make the calves more susceptible to predation. Also, a generally higher population density in semi-domesticated herds compared to wild populations can make dispersion a less efficient strategy and the reindeer calves easier prey. Overall, the lack of ability of the reindeer females to reduce brown bear encounter risk on the scale of the calving range is probably an important reason for the high brown bear predation rates on reindeer calves documented in our study areas. 

PV-Wind Hybrid Systems for Swedish Locations

PV-Wind-Hybrid systems for stand-alone applications have the potential to be more cost efficient compared to PV-alone systems. The two energy sources can, to some extent, compensate each others minima. The combination of solar and wind should be especially favorable for locations at high latitudes such as Sweden with a very uneven distribution of solar radiation during the year. In this article PV-Wind-Hybrid systems have been studied for 11 locations in Sweden. These systems supply the household electricity for single family houses. The aim was to evaluate the system costs, the cost of energy generated by the PV-Wind-Hybrid systems, the effect of the load size and to what extent the combination of these two energy sources can reduce the costs compared to a PV-alone system. The study has been performed with the simulation tool HOMER developed by the National Renewable Energy Laboratory (NREL) for techno-economical feasibility studies of hybrid systems. The results from HOMER show that the net present costs (NPC) for a hybrid system designed for an annual load of 6000 kWh with a capacity shortage of 10% will vary between $48,000 and $87,000. Sizing the system for a load of 1800 kWh/year will give a NPC of $17,000 for the best and $33,000 for the worst location. PV-Wind-Hybrid systems are for all locations more cost effective compared to PV-alone systems. Using a Hybrid system is reducing the NPC for Borlänge by 36% and for Lund by 64%. The cost per kWh electricity varies between $1.4 for the worst location and $0.9 for the best location if a PV-Wind-Hybrid system is used.

Kravsammanställning samt utvärdering avbildvisningsprogramför diagnostik inom telepatologi : En fallstudiemed SIV-metoden som tillvägagångssätt

De flesta har i sin närhet någon som drabbats av cancer och sjukdomsfallen har ökat genom åren. Den yrkesgrupp som ställer diagnos av denna sjukdom är patologer. Bristen på patologer är idagsläget stor och det finns därför ett behov av att finna effektiva lösningar för att möta denna brist och en ökande mängd patienter. För att digitalisera vävnadsproven som diagnostiseras, scannas dessa in med en glasscanner. Dessa digitala bildfiler kan sedan visas i ett bildvisningsprogram och delas digitalt mellan patologer på distans. Detta begrepp kallas för telepatologi. Studien utgår utifrån följande frågeställningar: Vilka krav är väsentliga och bör ingå i en utvärdering för bildvisningsprogram avsedda för diagnostik inom telepatologi? Vilket bildvisningsprogram är mest lämpat att implementeras i ett webbaserat system baserat på dessa väsentliga krav? Syftet med studien är att undersöka vilka krav som är väsentliga och bör ingå i en utvärdering av bildvisningsprogram avsedda för diagnostik inom telepatologi, samt att utföra en utvärdering av ett urval bildvisningsprogramvaror med hjälp av dessa krav. En fallstudie genomfördes med datainsamlingsmetoderna: intervjuer med två personer från studiens samarbetspartner CGM, Frågeformulär där Sveriges patologer var respondenter samt dokumentstudier för att samla in information gällande bildvisningsprogrammen. Studien tillämpar utvalda delar ur Anders G. Nilssons SIV-metod som tillvägagångsätt för att samla in krav samt för att göra ett urval av bildvisningsprogram som sedan utvärderas gentemot dessa krav. Resultaten av datainsamlingarna analyserades och ledde till ett kravdokument med väsentliga krav.Tre så kallade utslagsgivande faktorer bland dessa krav var att bildvisningsprogrammet måste vara webbaserat utan installation på klient, funktioner för in- och ut-zoomning samt panorering måste finnas. Utvärderingen av utvalda bildvisningsprogram visade slutligen att OpenSlide var mest lämpad att implementeras i ett webbaserat system.

Kvinnor i styrelser : Att lyckas i en mansdominerad värld

Kvinnor har länge varit exkluderade från ledarpositioner, såsom styrelser, men utvecklingen mot en mer jämställd könsfördelning går långsamt framåt. Syftet med uppsatsen är att skapa förståelse för hur kvinnor i styrelser kan bidra till utvecklingen mot en jämnare könsfördelning. Genom att intervjua fem kvinnliga styrelseledamöter har vi fått en inblick i deras upplevelser och erfarenheter av styrelsearbete och könsroller. Kvinnorna i undersökningen har, genom många års styrelsearbete i olika former samt genom gedigna arbetserfarenheter, arbetat sig fram till ledande positioner inom olika branscher och företag. Även om de överlag inte anser sig ha behandlats annorlunda i styrelsen på grund av sitt kön kan vissa av kvinnorna ändå uppleva att de ibland förväntas ansvara för specifika uppgifter just för att de är kvinnor, att de behöver tuffa till sig eller att de måste vara mer pålästa och duktigare än männen. De anser att kvotering kan vara det enda sättet att få jämställda styrelser men understryker att det bör vara kompetensen som avgör vem som får uppdraget. För att lyckas bra som ledamot krävs, enligt respondenterna, en viss baskunskap om ekonomi och ledarskap samt ett visst mått av självsäkerhet och att våga stå för sina åsikter. Kravbilden på styrelsemedlemmar i bolagsstyrelser har ökat under de senaste årtiondena och det krävs att medlemmarna som individer har en hög kompetens och att styrelsen i sin helhet besitter en bred kunskapsbas. Denna utveckling kan ha en positiv effekt på könsfördelningen då det är fler kvinnor än män som har universitetsutbildning och eftersom en mer heterogen grupp ger ett bredare spektrum av kunskaper. Kvinnorna i undersökningen har genom sina positioner bidragit till brytandet av normer och gör det därför lättare för andra kvinnor att följa i deras spår. Det råder ingen brist på kompetenta kvinnor men utmaningen ligger i att kartlägga och synliggöra dessa kvinnor och ge dem samma möjlighet som männen att nå ledande positioner.